Trying to restore Snow Leopard from TM

I installed Lion on Aug 27th and had several crashes in Mail and have been unable to find a solution. So I have
renstalled SL which went well but now would like to go back to before Aug 27 in TM to reload all apps and data.
With the present SL and entering TM I can see that Aug 26 is there and would like to bring that into my Mac.
Is this possible?
I have inserted my SL disc loading the installer and at that point used the Utilities pull down to select restore from
Time Machine. Continued on to the screen where I should see my TM but do not.
I also thought I could just select the Macintosh HD and then enter TM at the date I want and do a restore there but that just grinds forever.
Could someone help in restoring SL please. I even tried to connect directly to the TM via its ethernet cable but still could not see TM.
Confused
LarryB

Things are worse than I thought.
I can see my TM backup on the desk top but cannot connect to it using Star Wars interface. I can't select it using TM "select disk" as it does not show up.
More confused
LarryB

Similar Messages

Crashes while trying to reload Snow Leopard from the disc.

I am trying to reload Snow Leopard onto a MacBook Pro. It crashes every time I attempt it. When starting up without the disc, I get a folder with a question mark. What is wrong? When attempting to start up using the Snow Leopard disc, it crashes.
Any suggestions?

The folder on the question mark is the firmware telling you it can't the bootable volume it was told to boot from.
It might not know, or it's gone or the drive is dead or some other issue it can't find it.
Hold the option/alt key down on a wired or built in keyboard and boot the machine into Startup Manager, there you can select from the bootable options if they exist or not corrupted.
Also the disk can be inserted and booted (and ejected) from here as well.
If after booting from the disk it crashes, the disk is likely bad or not compatible with that machine.
How to erase and install Snow Leopard 10.6
Reset your Mac
How to revert your Mac to Snow Leopard

Restore Snow Leopard From time Machine without an Optical drive

I have a couple of year old Macbook with a bad optical drive.
I want to pull the hard drive out of the Macbook and replace it with the original drive that came with the machine. The problem is that the original drive has OSX Leopard and I would like to get snow leopard on it. I have a good time machine backup that i could use, but i do not know how to restore the entire disk without using the OSX install DVD.
Is there anyway that i can do a time machine recovery without using the optical drive.
Thanks.

In order to restore Snow Leopard to that drive, it will need to be formatted using Disk Utility and I can't think of a way to do that without the optical drive unless you use a different Mac or an external optical drive.

Cannot restore Snow Leopard from time machine from an earlier backup

I've been having a problem keeping my Mac Pro in sleep mode. I have tried disconnecting all USB's including those attached to the monitor. So I have decided to attempt to restore from a time machine backup from about 4 weeks ago to see if that resolves the problem. However at no point in the process am I offered a chance to choose which date to back up from. The restore process just assumes I want to restore from the latest backup.

Inserting the Snow Leopard install disk and launching from Finder. Then selecting 'Restart' which is what the user is told to do in the event of reinstalling from time machine. From that point the Mac restarts and installs SL but uses the latest time machine backup.

Trying to restore Snow Leopard PHP to original OS X 10.6.6 configuration

Several Version of OS X ago, I used Entropy PHP Package because the Apple supplied version did not offer some graphics handlers I needed.
Now, I'm up to OS X v. 10.6.6, and my entropy PHP no longer works. So I installed what appeared to be the latest release. Apparently it wasn't and Entropy doesn't have a package for 10.6.6. But it did mess up the stock PHP configuration on my machine.
Now,I understand from some research, that the OS X 10.6.6 version of PHP includes the graphics capabilities I want. The problem is restoring my system to the stock software since Entrophy has apparently messed it up.
Can I reinstall Snow Leopard 10.6.3 from my original discs and then do the software upgrades to get back to 10.6.6 so I'll have a stock version of PHP ?
Preferably without losing existing data files.
Thanks,
Robert

After you click Download, it should prompt you for your Apple ID and password - remember you must use the same one used to purchase it - and the download should commence. If that is not happening I have no explanation.
Perhaps it is already downloaded and waiting for you to install it?

Need Help Restoring Snow Leopard from Windows 7

Hello, My Kid Cousin Installed Windows 7 On My mac and formated/deleted everything from the hdd. Luckily i still have my timemachine backups on a external hdd. I was wondering how do i go about reinstalling Snow Leapord on My Mac Pro? I'm running Windows 7 on it now. Thank You

Insert the Snow Leopard install DVD into the DVD drive and reboot the system. Hold down the c key or the Option key and then select the DVD disc as the startup option or with the C key it should boot to the DVD Snow Leopard Install disc. Repartition the drive using Disk Utility as One partition with a format of Mac Extended (Journlaed) with a partition table of GUID and name the drive Macintosh HD. Then click Apply. After that is done exit DU and select Retore from Time Machine Backup (Have the TM drive connected before you Reboot the system) after a period of time SL and all your stuff will be restored.

I had to restore Snow Leopard from Mavericks - should I upgrade to Mountain Lion?

Hi,
I installed Mavericks from Snow Leopard and it corrupted my computer (MacBook Pro 2011). I restored the backup and I don't want to try Mavericks again.
I have a copy of Mountain Lion that I never installed.
Should I install Mountain Lion or should I leave it as is? My computer is perfect and never even crashed until I installed Mavericks. The only reason I would like to upgrade is to run a few apps that are not compatible with Snow Leopard, e.g. PDF Pen, Gemini, Day One... (nice but not essential).
I'd be grateful for any advice.
Thanks,
Rachel

A couple of things to consider:
First, do you use any programs which are PowerPC only (they'd be pretty old)? Snow Leopard was the last Mac OS X system that supported that software on Intel based Macs.
Second, as Mac operating systems get further and further away from the current OS, Apple stops supporting them and that would include security updates. Indeed, two weeks ago, Apple released Security Updates for Lion and Mountain Lion but Snow Leopard was not on the list.
I think the best solution, if you have the room, is what Eric Root suggested: having two partitions with one for each OS. Clone the 10.6 partition and then upgrade it to 10.8 so you have all your software already installed.

Can I revert back to Snow Leopard from Lion?

Hey guys,
Last night i upgraded to Lion. Have since found out my Focusrite 24 DSP audio interface wont work with Lion (No Drivers yet).... can i simply re-install Leopard from the install discs that came with my imac until such time as drivers become available for my hardware, then re-install Lion? Can this be done without clearing my entire hard-drive and starting again?
Cheers
Sean

mscys wrote:
If you have a complete Time Machine backup of your previous Snow Leopard system, going back to SL is really quite easy.
Just boot from the Lion Recovery partition (option key at startup) and choose to restore from Time Machine backup. (You'll be able to see your last dated and identified SL backup, even if you'd already been using TM with Lion.) It will erase the drive for you and restore a bootable SL. No DVD required.
Works great.
(If you don't have a complete TM backup, then you'll have to wipe the drive, install SL and updates, then use Migration Assistant to bring over your partial TM backup, ie: does not include system and apps.)
Thanks very much for this. I've just restored Snow Leopard from Time Machine, and it only took 30 mins. Worked perfectly. Now I have an OS that works properly (hooray!).
Bob.

Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

install 6.5 before proceeding further. I coud not understand.
Just what it says - install os 10.6.5 before proceeding further. You can either do so through Software Update or use the Combo update from Apple's download site.
You should repair permissions and restart your computer prior to updating and upgrading.

Restore data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?

Hi,
I have OSX Lion and have been backing up to Time Machine, I now want to do a clean install of Snow Leopard (not from backup), but can I restore my data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?
Thanks.

You should be able to restore iTunes and iPhoto files if the Lion system was running the same version of those applications that you'll have on the Snow Leopard system. However, you won't be able to restore files for applications like Mail, Address Book, or Safari, as the versions of those won't match.

Can I restore to Snow Leopard from Lion using time machine?

Can I restore to Snow Leopard from Lion using time machine? I did not make a new partition on my external HD. My reason for doing this is to import data from Quicken 2007 to Quicken Essentials and then upgrade back to Lion. Can I restart and hold down the "OPTION" key upon start up that will take me to Apple Recovery HD and recover from time machine? I'm a noob at these sort of things. I appreciate your comments and suggestions.

Probably not. See Kappy's going back to SL from Lion guide.

I am trying to reinstall Snow Leopard on my iMac (Spring '08)...

I am trying to reinstall Snow Leopard on my iMac (Spring '08) and part way through the install my screen shuts off and does nothing but my computer is still running. I've turned it off, unplugged it and let it sit for about 10 minutes. I turn it back up and hold down "c" to boot from disk and the install screen pops back up. I do a disk check and it passes so I try to install again, which it says it can restore the last install's process and then begins installing again. After about 10-15 minutes my screen shuts off and goes to sleep, my mouse and keyboard will not wake it up. All I have plugged in is the mighty mouse and keyboard. This is getting frustrating...

Reset the SMC
The computer sleeps or shuts down unexpectedly.
https://support.apple.com/kb/HT3964

Error message when trying to install snow leopard

Hello,
I just tried to install snow leopard version 10.6 and get an error message mid installation that kicks the cd out of the drive and stalls. I can't complete the installation. I have a macbook pro 1,1 with 1.83 ghz processor with 1gb of ram and 25 gb of harddrive space left. i currently have version 10.4.11. any ideas about why this is happening or how to trouble shoot?

See the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).
I suggest you backup your Tiger system, then boot from the Snow Leopard DVD, use Disk Utility to erase your hard drive, then install Snow Leopard. You can then selectively restore your files from your backup. To make this process easy be sure to create your new Snow Leopard user account with the same username that you have for your Tiger account. Any third-party software that you have you should reinstall rather than trying to copy from the Tiger backup.

How to revert back to Snow Leopard from Lion?

Foolishly I just jumped straight in, downloaded Lion and installed it, and well... I really don't like it. It's not a patch on SL.
So I'm trying to work out the best way of reverting back to Snow Leopard.
I have:
My Snow Leopard install disc.
A SuperDuper, bootable backup from 48 hours pre-upgrade.
A Time Machine backup from 48 hours pre-upgrade.
I'm fairly sure that just putting the SL install disc in, isn't going to work.
I think I have a couple of options.
1. Erase the hard drive completely, and then do a fresh SL install, then restore the last TM backup.
2. Boot from the SuperDuper backup, then restore the last TM backup.
I'd prefer option 1, as this gives me a clean install (I hope).
Before I go ahead, can anyone:
a) See any problems with carrying this out, or
b) Suggest a better, safer method?
I'm a bit concerned that SL was an upgrade to an existing OS, rather than a complete OS in itself, so I'm very wary of what might happen if I wipe the drive then put the disc in, hoping it'll give me a nice new version of SL. Might need to go and do a bit more reading up.
Thanks.

For ref.
Dragged and dropped copies of important files (Docs, Pictures, Downloads, Movies etc) to a spare drive.
Printed off any docs that I absolutely could not afford to lose.
Shut down Mac.
Attached USB drive with SuperDuper backup, and powered up drive.
Powered up Mac, and immediately pressed the option key.
From the window that popped up, chose my USB drive as the boot disk and pressed return.
Mac powered up running Snow Leopard from USB drive.
Started Disk Utility, and erased the disk labelled 250.06 GB Fujitsu.... etc In the 'name' field, entered 'Macintosh HD'
Started up SuperDuper! and copied my backup over Macintosh HD.
Incidentally, the first step it took was to erase Macintosh HD anyway, so I could probably have skipped the first erase.
Let SuperDuper! do it's thing for 90 mins.
Once it had completed, closed the machine down (it wouldn't let me eject the USB drive, as presumably it was still using that as the boot disc).
Detached and powered off USB drive.
Pressed Mac power button and crossed fingers...
And goodbye annoying Lion, hello again, good old Snow Leopard!
Didn't even need to restore the last Time Machine backup.
I may take another look at Lion again, further down the road, when hopefully Apple will have realised that OS X and iOS are two completely different animals, and that we don't all want our Macs behaving like our iPads.
For now though, I'm sticking with SL.

I am currently trying to load Snow Leopard onto my system and it is frozen

I am currently trying to load Snow Leopard onto my laptop, I have the 10.4.11 system, but the process is stuck on 41 minutes remaing and has been for about half an hour, so nothing is budging! Please help, I am too scared to stop it as the guy in the shop said "whatever you do just let it run its course!" Thank you, Kate

Boot from your bootable backup drive - restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for your external drive then click on the downward pointing arrow button.
After the computer starts up do the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Leave DU open and do the following:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal drive. Source means the external drive.
This will restore your old system so you can continue using the computer.
An alternative to the above is that after formatting the internal drive restart from the Snow Leopard DVD and install Snow Leopard on the freshly formatted internal drive. You can then restore your Home folder and other applications through the Setup Assistant which will provide an option to restore your files from another Mac or hard drive.

Trying to restore Snow Leopard from TM

Similar Messages

Maybe you are looking for