Trying to run AHT
I have used both and external dvd reader and ny imac internal both with the same results.
When holding the d key down to run diagsotics it looks like its getting ready to start the disk but the imac shuts down instead,. What coudl cause this. I have tried multiple disks as well. Any fixes?
This may help you to confirm that you are using the right method, for Your EXACT model of iMac, to run AHT:
For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.
For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead. An Internet-enabled connection via ethernet or Wi-Fi is required to use this feature. Some computers that shipped with Lion require a software update to use this feature. See Computers that can be upgraded to use Lion Internet Recovery for more information.
Hope this helps
Similar Messages
-
Macbook mid-2007 -- original OS shipped? Trying to run AHT.
What was it? I'm thinking 10.3 Panther, as I later upgraded to 10.4 Tiger.
Reason for the question: I'm trying to upgrade to 10.6 Sow Leopard, but that OS won't install. Ran Repair Permissions, trying to run Apple Hardware tests but no longer have the original OS disks that came with the machine. Apparently I need these to run this test? Other suggestions welcome.
TIA, Pete Tillman
"Tillman was in the Oval Office again... kicking himself for not taking
that Christian kid's body while he had the chance. He could've at least
borrowed it for a while..." -- Dennis Danvers, _End of Days_ (1999)Yes, you need the original discs to run the AHT on that model. You can purchase replacement discs from Apple.
Original OS
Mac OS X 10.4.9 (8P4112)
Later OS
Mac OS X 10.4.10 (8R3025, 8R3032)
Maximum OS
Mac OS X 10.7.4
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site. -
G5 won't run AHT....systems freezes. Any Thoughts ?
Hi All,
I am trying to figure out what is going on with a G5 I have at work. Coworker says machine just freezes multiple times a day while she is working on it. I ran Tech Tools last week and it did not show any problems yet the freezes continue. So today I tried to run AHT version2.1 (G5 is running Tiger 10.4.8) and I can not get it to run. I first tried the extended test and on the first try it froze at 5 min 40 secs on the mass storage check and gave text in the screen top upper left ending in "ok". I restarted the machine and ran extended test again, this time it froze at 4 min at the logic board check again giving text ending in "ok".
Then I tried the quick test twice. First time it froze at 11 secs at the logic board check. Second time it froze at 2 and a half mins again at the logic board check. The text again was in the upper left of the screen and the message said something about "invalid memory access at....and gave a whole string of numbers which mean nothing to me.
So, does anyone have any idea what is going on with this machine? Do I have a RAM issue....this machine is mainly used for Photoshop work I had apple care on it but it expired 3/06 so that is no help. I will have new macs in a few months but am trying to keep this one running until they come in.
G5 Mac OS X (10.4.8)AHT on the original install disks/Tiger disks doesn't get updated with OS and firmware changes.
The Genius Bar has access to the latest versions of AHT.
Clone your hard drive (Superduper) to a new drive that you have Disk Utility>Zero-ed already and hold option to boot from the clone and see if your problems continue.
Your problem could be hard drive, corruption in software, bad memory, PCI cards, external devices and so on.
Only with a process of elimination can you solve your problem.
Hope that helps. -
How to run AHT on MacBook Pro 4,1
I would like to know how to run AHT (Apple Hardware Test) on my MacBook Pro 4,1 (early 2008) because I tried to follow the Apple support but I am not sure what to do. I updated my Mac to OS X 10.9 but I still have the original disks of Leopard 10.5
Thanks in advance
Cheers,
JassLook at the 'second' installation disk. It should have the AHT instructions on it. Insert the disk into the DVD drive and hold the D key.
Ciao. -
HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
When trying to run Mac OS X buttons are "disabled".
In the screen before the main desktop (when I have to choose a user) I can't select my user because all the buttons are disabled. (Main user, other user, shutdown, etc.) My root user is enabled, I don't know if that could be te reason. What can I do? Thank you very much.
mfrp wrote:
I know it is a bad idea, obviulsy didn't mean to do that. I am running 10.6.1 but can't click any buttons. Can't open System Preferences or anything because I can't log in. I mean, I can't open my desktop (may be I am not explaining it very well, sorry for my English).
I've tried to run the computer from the OS X installing cd, but can't select the "Utilities"menu.
Thank you for you quick answer.
Boot from install disc was my next suggestion.
So it will boot from install disc, but can't get to Disk Utility?
Are you running stock Apple-supplied RAM?
Any other issues leading up to this?
Might the HD be approaching "full?"
Try running Apple Hardware Test (hold d key down while booting from the disc with AHT on it). -
I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?
Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products. -
Error 405: file not found displayed when trying to run a process on server
Iam trying to run a "weblogic integration-process application" on server to test the application.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
-----------------------------------------------sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu -
"Error 404: file not found"displayed when trying to run a process on server
Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AMsorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu -
I am trying to run windows on a MacBook Pro using bootcamp.
Can anyone help? I am trying to run windows 7 on my MacBook Pro, 17 inch late 2011,
Mac OS X Lion 10.7.5
Intel HD Graphics 3000 384 MB
This what I've done
I used disk utility to format a 8g flash drive in MS-DOS (FAT) format. Then I went on the microsoft site and made sure I was downloading the correct system for my Mac, using the correct bootcamp (4). I went with the 32 bit. I then purchased the full .iso windows 7 32 bit. I downloaded it and saved it to the previous flash drive. I went into bootcamp and downloaded the support software to the same USB flash drive. Then I ticked the box in bootcamp that says install windows 7, i partitioned the hard drive 40G windows and click install. The error message is that the disk can't be found. ok, not using a disk, but when I go back into my USB flash drive it says bootable :no. I hope this all makes sense to someone and you can help.
How can I make this USB bootable so bootcamp can install it? Where did I go wrong? Please be very step by step as I'm new at this.The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error while trying to run Bex Query -------- Field symbol is not assigned.
Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveencan u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too -
I am trying to run PASW with Lion.
I am trying to run PASW with Lion. I've found a patch that allows it to run, except that it will not do graphs. These always produce this warning: 'Could Not Start Java Virtual Machine. Chart will not be drawn." Anyone know of another patch for this?
DavidI am grateful for your atypical response.
DR -
I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.
same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . .
Maybe you are looking for
-
Drag and drop attachments between two email windows
Hi together, my problem is easy. i cannot drag and drop attachements between two email windows using Apple Mail. On my old MBAir it was no problem. I do not know which configuration i have to change. To drag and drop to the desktob is no problem. Now
-
Screen 1000 is not visible in se80, but it is there in se51
Hi, I do not know why i am not able to view selection screen 1000 in SE80 for my report program. But i could see in SE51. This is report program using ALV class. The program is working fine. Thanks Praba Edited by: Prabaharan Rangasamy on May 15, 200
-
Problems saving files to network with Adobe CC on Mac OS Yosemite
Hi there I have just made the change up to Adobe CC on my four Mac computers. This consists of three Mac Minis (new) running OS X 10.10 Yosemite (as installed by Apple) and an iMac running OS X 10.10 Yosemite (upgraded from 10.6 Snow Leopard). The pr
-
Hi, I have a question. What is the property lyid (layer id) into the psd file? Is it and identify that not changes after editing a saving psd file in photoshop? Seems that if I make some eidting to my psd file in photoshop and save file this lyids ch
-
FCP X doesn't show my external hard drive
Hi, everyone! when I started used FCP X at first time I import some videos and iMovie projects from an external hard drive. After 2 days of using, yesterday when i'm opened fcp x it hide an external drive and i can't work with this. Can anyone help m