Trying to run CSS11503 08.10.0.02 one-armed DNAT+SNAT with UDP 921
Is there a way to perform DNAT + SNAT and portmap disable on the CIsco CSS 11503. I need to do a DNAT in a one-armed configuration and the to SNAT for UDP traffic with SRC Port 9211 and DST Port 9211. I don't need loadbalancing but only NAT. Is there a way to solve this issue with ACL. Any help will be appreciated...
Thanks
if you want to do DNAT, you have to it a content rule.
The vip will be nated to the service address.
Then you need a group to nat the client ip.
Finally, you need to use the command 'portmap disable' under the group to avoid port mapping.
Gilles.
Similar Messages
-
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
Error 201 when trying to run the demos !! HELP !!
Hello, we are just trying to run the demos provided in the ZIP file that comes with the XDK version for Solaris 9i and we are having problems apparently with the encoding thing.
I dont really have a clue how to make it run or provide the right encoding parameter. I have attempted to use every single parameter, UTF-8, ISO, ASCII, etc
anyone had this problem at the very beginning?? or know how to solve it?? we r just beginner trying a start jump in XML and all this parser matter.
thanks a lot. Verde.Please refer to:
http://technet.oracle.com:89/ubb/Forum11/HTML/004973.html -
How can I run 12 Apple tv's off one itunes library?
Hi, I was wondering if anyone had a solution for running 12 apple tv's off one itunes.
We have recently setup a system with 12 1st gen apple tv's. After purchasing them we found there was a maximum restriction of having 5 Synced and 5 Streaming apple tv's per instance of itunes. The synced ones are set to not actually sync any content, but can however still access all of the itunes content as long as thec omputer is on. So essentiality they are all 'streaming', we never intended to store content on the apple tv's. As soon as you try to add an 11th apple tv to the itunes, one of the other apple tv's (at random) will no longer be able to access the computer running itunes and gets 'kicked off'. Has anyone done this and is there a way around it? I had thought of trying to run 2 instances of itunes pointed at the same library, with half of the apple tvs paired with each instance, but that doesn’t seam possible?
The new apple tv's use home sharing, does anyone know how many 2nd gen apple tv's can run off one itunes simultaneously?Welcome to the Apple Community.
I haven't been able to verify it because I only have 3 Apple TV 2's, but it's generally assumed there is also a limit of 5 devices for homesharing too. -
I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?
Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products. -
Error 405: file not found displayed when trying to run a process on server
Iam trying to run a "weblogic integration-process application" on server to test the application.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
-----------------------------------------------sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu -
"Error 404: file not found"displayed when trying to run a process on server
Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
It is giving me the below error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
File iam trying to run is RequestQuote.java
The file is in Tutorial_process_application_web/src/requestquote/
In the browser it is opening the below link:
http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
Thanks,
Vishu.
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>
Tutorial_Process_Application_Web</display-name>
<listener>
<listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
</web-app>
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
<wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
<wls:library-ref>
<wls:library-name>struts-1.2</wls:library-name>
<wls:specification-version>1.2</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>jstl</wls:library-name>
<wls:specification-version>1.1</wls:specification-version>
<wls:implementation-version>1.1.2</wls:implementation-version>
</wls:library-ref>
<wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
</wls:weblogic-web-app>
application.xml
<?xml version="1.0" encoding="UTF-8"?>
<application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
<display-name>
Tutorial_Process_Application_Ear</display-name>
<module id="WebModule_1180909671484">
<web>
<web-uri>Tutorial_Process_Application_Web.war</web-uri>
<context-root>Tutorial_Process_Application_Web</context-root>
</web>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
</module>
<module>
<ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
</module>
</application>
weblogic-application.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
<wls:ejb>
<wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
</wls:ejb>
<wls:application-param>
<wls:param-name>webapp.encoding.default</wls:param-name>
<wls:param-value>UTF-8</wls:param-value>
</wls:application-param>
<wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
</wls:module-ref>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
<wls:classloader-structure>
<wls:module-ref>
<wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
</wls:module-ref>
</wls:classloader-structure>
</wls:classloader-structure>
</wls:classloader-structure>
<wls:listener>
<wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
</wls:listener>
<wls:library-ref>
<wls:library-name>beehive-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>wls-commonslogging-bridge</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
<wls:library-ref>
<wls:library-name>weblogic-controls-1.0</wls:library-name>
<wls:specification-version>1.0</wls:specification-version>
<wls:implementation-version>1.0</wls:implementation-version>
</wls:library-ref>
</wls:weblogic-application>
Edited by gvishu at 06/04/2007 9:39 AMsorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
Thanks,
vishu -
I am trying to run windows on a MacBook Pro using bootcamp.
Can anyone help? I am trying to run windows 7 on my MacBook Pro, 17 inch late 2011,
Mac OS X Lion 10.7.5
Intel HD Graphics 3000 384 MB
This what I've done
I used disk utility to format a 8g flash drive in MS-DOS (FAT) format. Then I went on the microsoft site and made sure I was downloading the correct system for my Mac, using the correct bootcamp (4). I went with the 32 bit. I then purchased the full .iso windows 7 32 bit. I downloaded it and saved it to the previous flash drive. I went into bootcamp and downloaded the support software to the same USB flash drive. Then I ticked the box in bootcamp that says install windows 7, i partitioned the hard drive 40G windows and click install. The error message is that the disk can't be found. ok, not using a disk, but when I go back into my USB flash drive it says bootable :no. I hope this all makes sense to someone and you can help.
How can I make this USB bootable so bootcamp can install it? Where did I go wrong? Please be very step by step as I'm new at this.The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error while trying to run Bex Query -------- Field symbol is not assigned.
Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveencan u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too -
I am trying to run PASW with Lion.
I am trying to run PASW with Lion. I've found a patch that allows it to run, except that it will not do graphs. These always produce this warning: 'Could Not Start Java Virtual Machine. Chart will not be drawn." Anyone know of another patch for this?
DavidI am grateful for your atypical response.
DR -
I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.
same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . . -
I am trying to run this sample on my machine
I am trying to run this sample on my machine as per the instructions to
install the sample in WLISampleUserGuide.pdf. When I go to the step 6 of the
installation, I get the following error in the Weblogic Server Console.
<Sep 17, 2001 10:47:36 AM GMT+05:30> <Error> <Management> <Error
initializing module certificate.war
of application samples:Name=certificate,Type=Application from path
.\config\samples\applications: w
eblogic.management.MBeanCreationException: cannot find referenced module
certificate.war>
<Sep 17, 2001 10:47:46 AM GMT+05:30> <Error> <Management> <Error
initializing module console.war of
application samples:Name=console,Type=Application from path
.\config\samples\applications: weblogic.
management.MBeanCreationException: cannot find referenced module
console.war>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <Management> <Error preparing
application component cer
tificate.war of application samples:Name=certificate,Type=Application:
java.io.FileNotFoundException
: .\config\samples\applications\certificate.war (The system cannot find the
file specified) ((localP
ath: java.io.FileNotFoundException:
.\config\samples\applications\certificate.war (The system cannot
find the file specified))>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <J2EE> <Error deploying
application certificate: error
retrieving component [Caching Stub]Proxy for
samples:Name=certificate,Location=myserver,Type=WebAppC
omponentConfig,ApplicationConfig=certificate>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <Management> <Error preparing
application component con
sole.war of application samples:Name=console,Type=Application:
java.io.FileNotFoundException: .\conf
ig\samples\applications\console.war (The system cannot find the file
specified) ((localPath: java.io
.FileNotFoundException: .\config\samples\applications\console.war (The
system cannot find the file s
pecified))>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <J2EE> <Error deploying
application console: error retr
ieving component [Caching Stub]Proxy for
samples:Name=console,Location=myserver,Type=WebAppComponent
Config,ApplicationConfig=console>
Loaded resources from
'/D:/bea/wlintegration2.0/config/samples/wlai/wlai.properties'
[SerializationTester] : isSerializable(class javax.naming.Binding)
java.io.NotSerializableException: javax.mail.Session
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1148)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1841)
at
java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.jndi.internal.SerializationTester.isSerializable(SerializationTeste
r.java:36)
at
weblogic.jndi.internal.BindingEnumeration.fixNonSerializableBindings(Binding
Enumeration.j
ava:29)
at
weblogic.jndi.internal.BindingEnumeration.writeExternal(BindingEnumeration.j
ava:48)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1180)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.rmi.internal.CBVOutputStream.writeObjectInternal(CBVOutputStream.ja
va:220)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:213)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:190)
at
weblogic.jndi.internal.ServerNamingNode_WLSkel.invoke(ServerNamingNode_WLSke
l.java:262)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
at
weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher
.java:115)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.listBindings(ServerNamingNode
_WLStub.java:
374)
at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:293)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:724)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getDeployedPlugins(PluginMan
agerCfgImpl.j
ava:710)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(PluginMana
gerCfgImpl.ja
va:811)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfgImpl.ja
va:75)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanImpl.init(PluginManagerCfgBea
nImpl.java:79
0)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanEOImpl.init(PluginManagerCfgB
eanEOImpl.jav
a:1270)
at
com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListenerBean
.java:151)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1933)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1892)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1779)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1972)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Initialized WebLogic Process Integrator Plugin Framework version 1.0
Started WebLogic Process Integrator version 2.0 SP 3
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicCollaborate> <INFO:
WebLogic Collaborate Serv
er started successfully.>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer> <WebLogic
Server started>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer>
<SSLListenThread listening on port 70
02>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer> <ListenThread
listening on port 7001>
Once I put the certificate.war and console.war from
D:\bea\wlintegration2.0\config\mydomain\applications, the errors related to
the
certificate.war and console.war file are not shown. The Weblogic Server
Console now shows the following
Loaded resources from
'/D:/bea/wlintegration2.0/config/samples/wlai/wlai.properties'
[SerializationTester] : isSerializable(class javax.naming.Binding)
java.io.NotSerializableException: javax.mail.Session
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1148)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1841)
at
java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.jndi.internal.SerializationTester.isSerializable(SerializationTeste
r.java:36)
at
weblogic.jndi.internal.BindingEnumeration.fixNonSerializableBindings(Binding
Enumeration.j
ava:29)
at
weblogic.jndi.internal.BindingEnumeration.writeExternal(BindingEnumeration.j
ava:48)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1180)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.rmi.internal.CBVOutputStream.writeObjectInternal(CBVOutputStream.ja
va:220)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:213)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:190)
at
weblogic.jndi.internal.ServerNamingNode_WLSkel.invoke(ServerNamingNode_WLSke
l.java:262)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
at
weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher
.java:115)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.listBindings(ServerNamingNode
_WLStub.java:
374)
at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:293)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:724)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getDeployedPlugins(PluginMan
agerCfgImpl.j
ava:710)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(PluginMana
gerCfgImpl.ja
va:811)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfgImpl.ja
va:75)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanImpl.init(PluginManagerCfgBea
nImpl.java:79
0)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanEOImpl.init(PluginManagerCfgB
eanEOImpl.jav
a:1270)
at
com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListenerBean
.java:151)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1933)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1892)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1779)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1972)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Initialized WebLogic Process Integrator Plugin Framework version 1.0
Started WebLogic Process Integrator version 2.0 SP 3
Did anybody face this problem with this sample? Can somebody help me out
with this. I am also looking for some basic ways of developing a PIP using
Rosettanet. Is there is any site that gives such information. I have seen
the BEA site on rosettanet. That does not help me.
Regards,
Dharnidhar Vemuri
mailto: [email protected]Hi
I am also facing this similar problem. Could any one tell me the root cause of
this problem.
Thanks in advance.
Thanks and Regards
Ramko
"weblogic.integrator.developer" <[email protected]> wrote:
I am trying to run this sample on my machine as per the instructions
to
install the sample in WLISampleUserGuide.pdf. When I go to the step 6
of the
installation, I get the following error in the Weblogic Server Console.
<Sep 17, 2001 10:47:36 AM GMT+05:30> <Error> <Management> <Error
initializing module certificate.war
of application samples:Name=certificate,Type=Application from path
..\config\samples\applications: w
eblogic.management.MBeanCreationException: cannot find referenced module
certificate.war>
<Sep 17, 2001 10:47:46 AM GMT+05:30> <Error> <Management> <Error
initializing module console.war of
application samples:Name=console,Type=Application from path
..\config\samples\applications: weblogic.
management.MBeanCreationException: cannot find referenced module
console.war>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <Management> <Error preparing
application component cer
tificate.war of application samples:Name=certificate,Type=Application:
java.io.FileNotFoundException
: .\config\samples\applications\certificate.war (The system cannot find
the
file specified) ((localP
ath: java.io.FileNotFoundException:
..\config\samples\applications\certificate.war (The system cannot
find the file specified))>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <J2EE> <Error deploying
application certificate: error
retrieving component [Caching Stub]Proxy for
samples:Name=certificate,Location=myserver,Type=WebAppC
omponentConfig,ApplicationConfig=certificate>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <Management> <Error preparing
application component con
sole.war of application samples:Name=console,Type=Application:
java.io.FileNotFoundException: .\conf
ig\samples\applications\console.war (The system cannot find the file
specified) ((localPath: java.io
..FileNotFoundException: .\config\samples\applications\console.war (The
system cannot find the file s
pecified))>
<Sep 17, 2001 10:48:27 AM GMT+05:30> <Error> <J2EE> <Error deploying
application console: error retr
ieving component [Caching Stub]Proxy for
samples:Name=console,Location=myserver,Type=WebAppComponent
Config,ApplicationConfig=console>
Loaded resources from
'/D:/bea/wlintegration2.0/config/samples/wlai/wlai.properties'
[SerializationTester] : isSerializable(class javax.naming.Binding)
java.io.NotSerializableException: javax.mail.Session
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1148)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1841)
at
java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.jndi.internal.SerializationTester.isSerializable(SerializationTeste
r.java:36)
at
weblogic.jndi.internal.BindingEnumeration.fixNonSerializableBindings(Binding
Enumeration.j
ava:29)
at
weblogic.jndi.internal.BindingEnumeration.writeExternal(BindingEnumeration.j
ava:48)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1180)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.rmi.internal.CBVOutputStream.writeObjectInternal(CBVOutputStream.ja
va:220)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:213)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:190)
at
weblogic.jndi.internal.ServerNamingNode_WLSkel.invoke(ServerNamingNode_WLSke
l.java:262)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
at
weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher
..java:115)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.listBindings(ServerNamingNode
_WLStub.java:
374)
at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:293)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:724)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getDeployedPlugins(PluginMan
agerCfgImpl.j
ava:710)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(PluginMana
gerCfgImpl.ja
va:811)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfgImpl.ja
va:75)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanImpl.init(PluginManagerCfgBea
nImpl.java:79
0)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanEOImpl.init(PluginManagerCfgB
eanEOImpl.jav
a:1270)
at
com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListenerBean
..java:151)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1933)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1892)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1779)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1972)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Initialized WebLogic Process Integrator Plugin Framework version 1.0
Started WebLogic Process Integrator version 2.0 SP 3
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicCollaborate> <INFO:
WebLogic Collaborate Serv
er started successfully.>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer> <WebLogic
Server started>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer>
<SSLListenThread listening on port 70
02>
<Sep 17, 2001 10:49:46 AM GMT+05:30> <Notice> <WebLogicServer> <ListenThread
listening on port 7001>
Once I put the certificate.war and console.war from
D:\bea\wlintegration2.0\config\mydomain\applications, the errors related
to
the
certificate.war and console.war file are not shown. The Weblogic Server
Console now shows the following
Loaded resources from
'/D:/bea/wlintegration2.0/config/samples/wlai/wlai.properties'
[SerializationTester] : isSerializable(class javax.naming.Binding)
java.io.NotSerializableException: javax.mail.Session
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1148)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:1841)
at
java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:480)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.jndi.internal.SerializationTester.isSerializable(SerializationTeste
r.java:36)
at
weblogic.jndi.internal.BindingEnumeration.fixNonSerializableBindings(Binding
Enumeration.j
ava:29)
at
weblogic.jndi.internal.BindingEnumeration.writeExternal(BindingEnumeration.j
ava:48)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1180)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.rmi.internal.CBVOutputStream.writeObjectInternal(CBVOutputStream.ja
va:220)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:213)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.java:190)
at
weblogic.jndi.internal.ServerNamingNode_WLSkel.invoke(ServerNamingNode_WLSke
l.java:262)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:118)
at
weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher
..java:115)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java
:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.listBindings(ServerNamingNode
_WLStub.java:
374)
at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:293)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:724)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(PluginManage
rCfgImpl.java
:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getDeployedPlugins(PluginMan
agerCfgImpl.j
ava:710)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(PluginMana
gerCfgImpl.ja
va:811)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfgImpl.ja
va:75)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanImpl.init(PluginManagerCfgBea
nImpl.java:79
0)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanEOImpl.init(PluginManagerCfgB
eanEOImpl.jav
a:1270)
at
com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListenerBean
..java:151)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1933)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1892)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1779)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1972)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Initialized WebLogic Process Integrator Plugin Framework version 1.0
Started WebLogic Process Integrator version 2.0 SP 3
Did anybody face this problem with this sample? Can somebody help me
out
with this. I am also looking for some basic ways of developing a PIP
using
Rosettanet. Is there is any site that gives such information. I have
seen
the BEA site on rosettanet. That does not help me.
Regards,
Dharnidhar Vemuri
mailto: [email protected] -
I recieved a download of windows 8 OS Premium, and I'm trying to run it using bootcamp. Unfortunately it's trying to tell me that I need to run it off a flash drive. At this time I don't have a flash drive big enough to hold the OS and the required installer software. Any suggestions?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.
Maybe you are looking for
-
Brand New Ipod Touch 4th Generation
Just opened my new ipod touch 4th generation today. For some reason it will not appear on my devices in itunes! My other devices are fine. I tried all the troubleshooting and nothing is working! I tried uninstalling and reinstalling itunes and nothin
-
Sys.fn_xe_file_target_read_file performance
Hi, I am working with extended events and the function sys.fn_xe_file_target_read_file. I am using the file_name and file_offset to get new events, since the last time I queried the function. I am checking for new events once a minute like this: exec
-
Decimals number when using 'Calculate values as... normalize result'
Hello all, In a Bex report, we display a quantity per shipping condition (delivered/not delivered). To check the proportions of the quantitybetween delivered and not delivered, we use a calculated keyfigure that relates to this quantity and we set th
-
How to make a region mandatory based on some conditions using CO Extension?
Dear All, I want to make Attachments region in a seeded page mandatory, based on some conditions. I am able to make fields mandatory using CO Extension, but i am not able to make the attachments region mandatory. Please help. Thanks Raj
-
I'll admit I'm a P6 guy, but I do a fair amount of work in MSP (2010 or 2013.) In P6, I usually deal with updates by asking my customer for an actual start date, then an expected finish date (not worried about resource accounting....) I NEVER use a c