Trying to run netflix keep getting error 2103

I keep getting error code 2103 when I try to watch a show or movie on netflix. I have been able to watch netflix previously. but about a week ago it started to say error 2103. the error code says that there is an error with microsoft silverlight and I should uninstall and reinstall microsoft silverlight. I don't have a problem with any other browser just firefox. I prefer firefox but really want to be able to watch my netflix.

Reboot the computer
try another USB port
try another cable

Similar Messages

  • Trying to download itunes keep getting error message 2, any suggestions?

    trying to download itunes keep getting error message 2, any suggestions?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have installed Adobe digital additions and have tried to aurthorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please

    I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
    I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,

    this is from sjpt,
    Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your Adobe ID.

  • Trying to inistall itunes keep getting error code 2330 need help unistalling and reinstalling

    Im trying to install itunes but keep getting an error message. (The installer has encountered an unexpected error installing this package, this may indicate a problem with this package. Error code 2330
    I need some resolution please assist. I did call microsft but they want to charge just to get help.  I need assistance please.
    Thank  you

    Although it's a better bet with a 2330 than a 2349, I'd try running a disk check (chkdsk) over your C drive. 
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Tried opening iTunes but keep getting Error 7 (Windows error 1114)

    Tried to open iTunes and cannot ~ error 7 (Windows error 1114) not installed properly. Do I uninstall and re-install? Will I lose my library?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates
    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

  • Its been 2 days since the release of ios 5. i have tried and tried to update but keep getting error 3194. someone help?

    Please help me. Much apprieciated

    - Have you tried the actions specified for that error number here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    - Also look at the previous message on the right hand side of this page with the grren checkmark under the heading "More Like This".

  • Can't run Catalyst - keep getting error

    When I try to run Catalyst on my Mac (running 10.5.8) I get the error, "A file system error is preventing Adobe Flash Catalyst from launching."

    We've been getting the same error with CS 5 and CS 5.5 on remote accounts on our Macs. Local accounts seem to work fine.
    You might get some useful information if you examine the Catalyst log under:
    /Users/[account]/Library/Application Support/Adobe/Flash Catalyst/workspace/.metadata/.log
    In our case, the error came when the server was unable to lock a certain file (~/Library/Application Support/Adobe/Flash Catalyst/configuration/org.eclipse.osgi/.manager/.fileTableLock) on our server system.
    As a fix, I'm going to attempt to move the file onto the local drive.
    Don't know if you're having the same problems or not.
    Hope this helps.

  • My iPhone 5c randomly shuts off after a dimming screen with stripes down it its stuck in hard reset mode now while trying to restart i keep getting error code 9 so my phone is now a useless block of electronics please help me

    help me

    Hello Apple3041
    That error usually relates to security software blocking access to the iTunes servers. Check out the articles below for more info and what to do to resolve the issue. 
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/TS3125
    Regards,
    -Norm G.

  • I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

    I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

    make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    copy the installation files to a desktop folder and install from there.

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling :(

    keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work!  I am running windows 8 (which it has worked with ok before) - struggling
    I recently bought some new albums and can't play them on my ipod

    I just encountered the same problem on my 2 month old MBPro.  I found a work around by changing USB ports.  As for the actual cause or the reason why that worked, I dont know.  The USB port I was using works fine with my phone or other USB devices.

  • Up graded from elements 9 to 11 tried to run incremental backup and keep getting error

    I keep getting error c:\ program data\adobe\elements organize\catalogs\my catalog\catalog pse 11 db. any help on this issue would be great.

    That's not one of Apple's better messages, unfortunately. 
    Most likely, there's a problem with a particular file, but they don't bother to tell you that.
    See #C3 in Time Machine - Troubleshooting.
    Also note that, on Leopard, the restored drive will be treated like a new one, and Time Machine will do a full backup of it.  You cannot prevent that.    But if you meant 10.6.8 (Snow Leopard), it probably will figure out what's happened and do only an "incremental" backup of the changes. 

  • Tried to update ITunes, but keep getting error: Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services". How do I get my ITunes back?

    Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services."
    So how do I get my ITunes back? 

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

    I just tried to install the iTunes update 11.4.1 and keep getting error messages.  I have never had this issue before over many years of using iTunes and getting updates to the software.  I have removed the iTunes from my computer and reinstalled it but keep getting the errors.  Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team.  iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

    Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

  • I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for

  • BW Authorization Error documentation Question

    Hi, I have a question, may be you can help in this: Q: In BW Analyzer if we get the following authorization error for some reason: ->Authorization Check You do not have authorization for Add or Create There is a Details tab to see the authorization e

  • Cisco ISE Deployment

    Dears, We have 2  ISE server. I configured wired, wireless,vpn, guest user authentication from ISE server. All of them are normal working. Both of ISE server have same Image.(ver 1.2) I deployed ISE servers as HA.  I register second ISE server at pri

  • Daily Payment Query

    Hi Experts, I have got query to see daily cheque payment history which only related prior date's invoice from today. However, I am stuck to get right result when there are multiple seperate payment history for same customer. I appreciate for any help

  • ME23N Script convert to PDF and send thru mail to the user created by

    Hi, I have created a custom PO SAP scirpt for the tcode ME23N and configured the same in tcode NACE Application 'EF' , output type 'NEU' But the client requirement is to send  this SAP Scipt PO converted to pdf & then send thru email to the user who

  • MRP based pricing

    Dear All, I have a pricing scenario wherein  we have two prices: 1. Price condition type for MRP price .We need to deduct Excise abatement from MRP and calculate BED ECESS and SHE from MRP.(Internal use) 2. Price condition type for Distributor price