Trying to run Vednor changes reports S_ALR_87012089 and S_ALR_87012090

Looking at some other posts I would like to use the following reports.
S_ALR_87012089 - Display Changes to Vendors
S_ALR_87012090 - Display/Confirm Critical Vendor Changes
However, when I try to run these from system>services>reporting it says the Programs ( S_ALR_87012089 and S_ALR_87012090 ) do not exist.
We are using ECC6.
Can anyone tell me how I can run these or equivelant reports please.
Thank you
Karen

in there you have to give the corresponding program
you can find the program in the right bottom drop down list of sap screen.

Similar Messages

Help Needed!!!! Running Forms 6i, Reports 6i and WebDB on the same NT box...

Hi All!
I am in need of some help.
I'm trying to set up the sample code for the Healthy Living WebSite.
I need to have WebDB 2.2x, Forms 6i and Reports 6i all running on the same box. Does anyone know how to set this up....?
Thanks,
Matt
[email protected]
null

Hi Matt,
You didn't mention but do you also wish to install the database(8i) on the same machine ?
I am also trying to install all these products(+8i and designer 6i) on the same box but I am concerned more about the min. resources needed before I get started.(I put up a question about it on the 6i Forum, but nobody has answered yet !)
The correct install order should be Forms/Reports 6i then Forms/Reports 6i Server and then WebDb 2.2.
Forms /reports server needs a http listener and installs en configures the WebDb listener for the job.(you are prompted for this during tho have the install process).This is handy if you are intending to use WebDb anyway. When you install Webdb it detects the already installed WebDb listener and does not reinstall.
You do have the SYS password on the database you will use to stored the WDK and WebDb schema.
About installing the demo.....
I dont' think there are any special issues.I have never done it.
If you are intending to install an 8i database on the same box there are some important things to consider with respect to the install order and what products in which Oracle home must be installed.
1.Forms/Reports first in the default_oracle
home.
2.Then Oracle 8i in a 2nd oracle home call
it ora81 for example.
3.Then WebDb in the non oracle 8i home !!
This is just a quick summary.
If you run into any problems let me know
Good Luck.
Dave.

I keep getting a message that itunes incorrectly tried to run the C runtime library and now itunes won't work anyone know how to fix it?

My computer keeps telling me that itunes tried to incorrectly run the C runtime library and now I can't get into it, I've tried uninstalling and reinstalling it but nothing is working

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Portal runtime error while trying to run a MSS report

Hello gurus!!
   I setup the MSS reports launchpad and now I am seeing all the list of reports on the reports launchpad. I am able to click on all the links and each link opens up the relevant page and the selection criteria also comes up. However, on the last screen, I get a portal runtime error after I click on the report result button.
The trace file shows the following errors:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[17, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.16.trc]/>
<!NEXTFILE[defaultTrace.18.trc]/>
<!LOGHEADER[END]/>
#1.5 #0050568444360067000005D2000005D400049F27DC8DD843#1300893459438#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SSUBBARAO#113523##n/a##ae3b7a53556011e0cd95000000191d7e#SAPEngine_Application_Thread[impl:3]_23##0#0#Fatal#1#/Applications/Xss#Java###null
[EXCEPTION]
#1#com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Exception condition "PROFILE_NOT_INITIALIZED" raised., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.record.blc.RfcManager.rfcExecute(RfcManager.java:453)
     at com.sap.xss.hr.cat.record.blc.RfcManager.init(RfcManager.java:820)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalRfcManager.init(InternalRfcManager.java:280)
     at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.onInit(FcCatRecordInterface.java:353)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface.onInit(InternalFcCatRecordInterface.java:268)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface$External.onInit(InternalFcCatRecordInterface.java:542)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendar.onInit(VcCatCalendar.java:251)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendar.onInit(InternalVcCatCalendar.java:194)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarInterface.onInit(VcCatCalendarInterface.java:162)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface.onInit(InternalVcCatCalendarInterface.java:146)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface$External.onInit(InternalVcCatCalendarInterface.java:222)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1346)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:867)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Exception condition "PROFILE_NOT_INITIALIZED" raised., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.cat.general.model.slim.CatsModelSlim.hrxss_Cat_Wd_Record(CatsModelSlim.java:245)
     at com.sap.xss.hr.cat.general.model.slim.Hrxss_Cat_Wd_Record_Input.doExecute(Hrxss_Cat_Wd_Record_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more
Could anybody please guide me how to fix this error and get the reports working properly?
Any help with this is much appreciated.
Thank you!
~Maria Kutty~

Hi,
Please refer to note 878440.
Thanks
Prashant

Trying to run the example "rf record and playback reference application"

http://zone.ni.com/devzone/cda/epd/p/id/5894 trying to run this example but a lot of files are not being found. I'm using Labview 8.5 with version 4 of the sound and vibration toolkit. I suspect the problem is the old toolkit version. Can someone confirm? Can't find any info on upgrading to toolkit so I suppose it would mean a new purchase? thanks

Hello Mike,
This example is designed for our RF Hardware platform. You need the RFSG driver, RFSA driver, Spectral Measurements Toolkit, Modulation Toolkit, and the advanced signal processing toolkit for the example to run. You should be able to see this under the software requirements at the bottom of the page. The two drivers should be available for download on our website, but the toolkits must be purchased and they aren't generally available with the dev suite.
I hope this helps,
Paul C
Message Edited by Paul C. on 03-11-2010 12:28 PM

Error 131-85 when trying to run general ledger report.

Hello when I try to run the general ledger report in SAP 8.8 I get the following error:
Data is not available; modify the selection criter and re-enter [131-85]. I used to be able to run the report no problem, and I can also run it under other users and my test account with the same criteria and am ok. Can anyone help?

Hi Jessica.....
This error generally comes when your Selection Parameters are not OK.
Please check the parameters or select all for from and to date period.....
Also please check whether to that particular user Accounts are accessible or not for generation this report....
Regards,
Rahul

Error when trying to run an FSG Report via XML Publisher...

hello.
Hope someone can help.
This is our first look into the benefits of XML Publisher in order convince Manager to start using it. Thing is, we really need to get both FSG reports and Dunning Letters working.
We've currently got XML Publisher 5.0.0 and BI Publisher Template Builder for Word v10.1.3.2.0
First up, FSG reports. Having followed this link here:
http://solutionbeacon.blogspot.com/2007/07/simple-tutorial-for-publishing-fsg.html
Ive managed to create a template based upon the basic FSG template supplied. I’ve follwed easy steps but on submitting the request against ANY [its what the notes said] FSG report the error messages from both the log and output files are given.. Those being..
Output file displayed the most productive error message:
DECLARE
ERROR at line 1:
ORA-06550: line 133, column 8:
PLS-00306: wrong number or types of arguments in call to 'SUBMIT_XML_REQUEST'
ORA-06550: line 133, column 5:
PL/SQL: Statement ignored
Can anyone help please? Or perhaps suggest an alternative to running FSG reports through XML Publisher.
Other thought was, do I need any different versions and/or Publisher Enterprise installing?
Many thanks for reading this..
Steven

..having tried an alternative presentation I got a singular FSG report to generate in PDF via XML Publisher..
www.darrylcarson.com/Dice/OVOAUG/MAY_2007/XMLP_and_RM.ppt
question closed..

Error while trying to run the Crystal Report ADD ON on SAP 8.8 Patch 12

Hello Expert,
I have installed Crystal addon version 2.0.07 on SAP 8.8 P12.While trying to start the crystal addon I am getting the following error.
"External connection to DB Failed.Please re-run the account setup with super user login."
regards,
pankajk

Hi Gordon,
I am unable to see the crystal manager in the menu after the installation of SAP 8.8.Only at the Tool there is Preview for th external crystal report.How to visualize the cyrstal report manager in SAP 8.8.
regards,
pankajk

Trying to run an older perl drag-and-drop program

At work we have a perl program that does a wonderful job of transforming a pre-edited (with tags) text file into an html document ready for the web including lots of external references to technical journals.
This was written eight or nine years ago in the Mac Classic days. There are three files. One is called formatter9. This has a camel icon with a circle with a line through it.
Then there is one called formatter9.pl and one called f9.template. The template is referenced in the formatter9.pl. I go into formatter9.pl and change the month each time before we use it at least 40 or 50 times during the course of a week.
This drag and drop application worked fine with Classic OS 9 loaded on PPC Macs, but not on Intel Macs.
I am able to run it on an Intel Mac with OS X 10.5 in terminal with an input file (called, for example, filename.txt) by entering:
perl formatter9.pl filename.txt
It would be nice to get this to work as a drag-and-drop in OS X, though. I've picked up a perl book, but it's new to me and I don't work with any techies.
My thought is that it might be as simple as changing the first few lines of code in the perl script. They are:
use strict;
my $isDroplet = 0; # 0=false, 1=true # use droplet for filter to be used by cgi
my $DEBUG = 1;
my $template = "f9.template";
my ($inText) = @ARGV; #$isDroplet?@ARGV:("something-esp.txt");
Would someone know if there might be a simple change to this code to make it work in OS X? If not, where else might I go to look for an answer?

BflatBlues wrote:
Then there is one called formatter9.pl and one called f9.template. The template is referenced in the formatter9.pl. I go into formatter9.pl and change the month each time before we use it at least 40 or 50 times during the course of a week.
Wait a minute. You are editing the script 40 or 50 times each week? Instead of worrying about making it drag and drop, change the code to accept a month as a parameter. Then just run it from the terminal with two parameters. Then use Automator to make it drag and drop and prompt the user for a month to select.

WIS 10901 error after trying to run a webi report

Hi ,
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS ,
CROSSJOIN( [ZCSIBPT00].[LEVEL00].MEMBERS, [ZCSIBPT02].[LEVEL00].MEMBERS ) DIMENSION
PROPERTIES MEMBER_CAPTION ON ROWS FROM [$ZCRDS02]
failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901).
above is the error message i received when i try to run 2 characteristics in webi.. when i run with only
one dimension it is running fine.. but when i includemore than one characteristic the above error occurs..
plz help me out.. any help is appreciated...
Regards,
KatiaT

Hi Pabloy,
I just tried it with one dimension and one key figure and I found a similar error...
can you help me?
Thanks
KatiaT

Error when trying to run an AWR Report

Hello -
I am getting the following when I try to run an AWR rpt:
Using the report name text
select output from table(dbms_workload_repository.awr_report_text( :dbid,
ERROR at line 1:
ORA-04045: errors during recompilation/revalidation of
SYS.DBMS_SWRF_REPORT_INTERNAL
ORA-04030: out of process memory when trying to allocate 4120 bytes (PLS
non-lib hp,pdz2M87_Allocate_Permanent)
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_SWRF_REPORT_INTERNAL"
ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 283
ORA-06512: at line 1
Anyone seen anything like this issue for AWR?
Thanks!

Mlike,
Please try to read the error message. as to identify the key error.
The key error is
ORA-04030: out of process memory when trying to allocate 4120 bytes (PLS
non-lib hp,pdz2M87_Allocate_Permanent)
This has to do with your OS process limits.
As you, as usual, didn't post a platform, it is difficult to help you out with exact commands.
Sybrand Bakker
Senior Oracle DBA

Two naive questions: change report templates and customization.

I searched the forum but didn't have the luck to find the exact answer.
1) I've chosen the alternating row color template for one of my report, however I wanted to change it to another template, say standard. Is it possible, and where I may find the place to change?
2) Is there a tutorial of how to customize the row color depends upon the value dynamically? Like an OBE. An elaborated example will be great!
Thanks in advance.

Radhika,
Thanks for the info. Unfortunately, based on this statement from the one link:
"Several macros in Sun ONE Studio IDE cannot be edited (for example, DATE, TIME, NAME of class, PACKAGE, etc.)."
It would appear there is no way to alter the timestamp format.
The question still remains of is there a way to access the year for a copyright stamp? If anyone else has any input, it would be appreciated.
Thanks again Radhika for your assistance.
-Mark

Tried to run Lion Recovery Disk Assistant, and now cannot access my external USB disk...

Greetings all,
I run the app after downloading it from Apple but it failed with a message that it could not use that drive. From then on, the drive is inaccesible. Disk Utility cannot repair it, it reports "incompatible filesystem". If someone has an idea on this I would be grateful as I have rather important personal and family info on this drive... It is a Lacie external USB drive of 1TB.

When did the file assistant fail saying it couldn't use the drive? If it's suddenly inaccessible, I can only assume it started the erase process before it failed?
So you know for future reference, review this link.
Excerpt from the above link:
System requirements
A Mac running OS X Lion with an existing Recovery HD
An external USB hard drive or thumb drive with at least 1GB of free space
How to use Lion Recovery Disk Assistant
The Lion Recovery Disk Assistant will erase all data on the external drive when creating the Recovery HD. You should either backup your data before running the Lion Recovery Disk Assistant, or create a new partition on the external drive.

IAC iview doesn't run when change to another and come back

Hi,
I've defined an IAC iview tha calls an ITS services (parameters ~webgui = 1, ~generatedynpro = 1, ~simpletransaction = 1, ~transaction = ).
First time I run this iview, it runs well. I run another iview and when I come back to the first one (IAC iview), it doesn't run, it shows me a r/3 screen that let me access r/3 menu, so it doesn't run my ITS service.
I'm using ECC (ITS integrated) and I'm not using SSO.
Any idea. All contributions will be appreciated.
Thanks a lot.
Best regards,
Iván.

Hello Iván,
I think you meant ~singletransaction right? If so please remove this parameter and try again.
Edgar

Trying to Add IBAN Field to Vendor Changes Report

Hi,
I need to add IBAN field to vendor changes report (S_ALR_87012089).
These are the steps I took:
1) Go to OBAT and add new field group
2) Go to OBAU and add new fields to field group created in (1)
However, TIBAN fields cannot be added to the field group.
Are there any workarounds?
Thanks.

No solution except customization

Trying to run Vednor changes reports S_ALR_87012089 and S_ALR_87012090

Similar Messages

Maybe you are looking for