Trying to see the Guided Demo of KM and Collaboration in SDN

Hi,
Just one month back , I found a eclass in SDN, a demo( guided end user tour) of KM and Coolaboration to illustrate the functionality of the end users. This was a eclass with the online demo but only with a voice and no small video of the instructor. The full page was used to show the Portal Page in action and showed the capability of KM AND COLL as the end would experience.
Currently all the eclass( KM and coll) are power point based demo and the one that I am talking about is no longer available.
Have any body seen the one I mentioned before and help me to find it. If any body has it stored on his/her's pc let me know, i can send my email address .
Thanks
Arun

Hi Arun,
have you checked this link?:
https://www.sdn.sap.com/irj/sdn?rid=/media/public/videos/knowledge management and collaboration features/index.html
There are a couple of other eclasses with powerpoint presentations and a speaker here on SDN. Just check the links on the right side panel under "eLearning" on the "Knowledge Management & Collaboration" Developer Area:
https://www.sdn.sap.com/irj/sdn/developerareas/km
Hope this helps,
Robert

Similar Messages

Authorisation problem when trying to see the data after loading

HI Everyone,
I loaded data in quality. when i am trying to see the data, i am getting the following messages
1.Your user master record is not sufficiently maintained for object Authorization Object for Plant
2.System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZCOPC_C21 ZCOPC_C21
3.System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZCOPC_C21 64
4.System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZCOPC_C21 64
Can any one of you tell whether it is a transport issue or some authorisation problem. Guide me how to solve this.
Thanks in advance for your help.

Hi,
After you get this error goto Tcode SU53 and then you'll get the object and activity for that auth object.
You can then go and check if this is enabled in your auth profile using SUIM tcode and going to users.
If its enabled then you need to check for values if you have authorization to display data for that particular plant.
This is an auth issue and you should get approval from the appropriate person in order for you to look at the Master data and then have the Security or Basis team grant you access to the same.
Cheers,
Kedar

Trying to see the whole picture

On my movies and home movies, I am trying to see the whole picture on my plasma TV. The setting on the tv will not let me get rid of the black parts. And I don't think the settings on the apple tv does not let me get rid of it either.
Can somebody help me out? I hope I gave enough information.

the appletv will display the content in the correct aspect ratio, therefore depending on the content you will get black bars.
for 4:3 content you will get black bars left and right (when viewing on a widescreen TV).
for widescreen content (for which there are many different aspect ratios), you will get black bars top and bottom (unless the content is the same ratio as your TV).
by displaying the black bars, the appletv (and your TV) is displaying everything correctly.

Short dump when trying to see the text elements of main window

Hi ,
The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
The message is like ' trying to create a field with zero length'.
Regards,
Jytoi.

hi
I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
regards,
shamim

HT201263 I see the "Connect to iTunes" screen and the device appears in iTunes. Everytime I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete

I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.

Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Trying to install the latest version of iTunes and when it is being installed I get the message "There is a problem with this installer package. A program quired for this install could not be run. Contact your support personel or package vendor."

I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

HT1414 I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without

I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes

I hope that you can see this response. The forum software is acting quite bizarre today.
You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again.

HT1544 I'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?

I'm trying to install the latest version of iTunes and the pop up tells me that I need to install Mac OS X 10.5. How do I do that?

OS 10.5.x is the max OS for Macs with a PowerPC processor. If your iMac has an Intel processor you can upgrade to Snow Leopard OS 10.6.x and possibly Lion OS 10.7
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?

LPC1979 wrote:
... it keeps asking me for the OLD password (2 email addresses ago) and then when entered correct tells me the account does not exist...which I already know. ...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

HT201263 The restore stops encountering an error and then i see the connect to itunes image and nothing happens.

The restore stops encountering an error and then i see the connect to itunes image and nothing happens.PLEAS HELP

Are you trying to restore as new or from a back up? Is iTunes and your computer all up to date?

HT201210 My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck!

Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.

Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit

Trying to see the Guided Demo of KM and Collaboration in SDN

Similar Messages

Maybe you are looking for