Trying to "See" time capsule on samsung tablet. Can it be done?

Trying to see our time capsule from a samsung tablet, can it be done?

What does "see" mean?
You can connect to internet.. that should be no problem.. but set wireless correctly.. using correct windows type names, not APPLE NAMES.. with spaces and illegal characters like apostrophe.
Use wpa2 personal security..
If you mean hard disk access.. that depends.. can galaxy tablet open a network drive..
Set the hard disk to windows name.. ie no spaces..
in file sharing, turn on the guest account to read and write access.
Put the correct workgroup into the TC.. generally WORKGROUP.

Similar Messages

  • Setup problem and now can't see time capsule

    On Friday, I used Airport utility to set up Time Capsule. There was a choice saying "do you want to add on to or replace and existing router?", to which I said yes. at the end of the setup, Airport asked "Do you want to replace the existing router now?" and I said no because I don't want to replace it yet. That seemed to confuse Time Capsule.
    On Monday, I disconnected the existing router and I tried to hook Time Capsule up to the DSL modem. Time Capsule didn't recognize the internet and my computer wouldn't recognize TC. Time Capsule is now not connected to anything (I reinstalled the old router and it is working fine). My computer can't see it an neither can Airport Utility. I tried to rescan but nothing comes up. Does anyone know what is wrong and how I fix it?

    The only way to tell is remove the drive and test it.
    I would do a reset of the TC first. Just hold in the reset button for about 7sec and wait for it to reboot. A reset will not do anything to your files. Then try again to access. If no luck the drive is probably dead. Either replace the whole TC under warranty.. or if you have no warranty left/drive contains valuable info, open up the TC.. plenty of sites explain how to upgrade to a bigger drive. just follow them. Put the drive into a USB carrier and plug it in or even better use it directly on sata port.

  • Where are my photos?  just tried to access time capsule after my first back up and am unable to open iphoto to verify they were backed up.

    where are my photos?  just tried to access time capsule after my first back up and am unable to open iphoto to verify they were backed up.

    You can't open your backups directly with apps.
    But you can see some types of files in your backups.  If you're still on Snow Leopard (or Lion with iPhoto '09 or earlier), see the gray box at the end of Time Machine - Frequently Asked Question #15.
    If you're on Lion with iPhoto '11, you can use the Finder to see the iPhoto library, per the beginning of that same link.  All you can see there is the library and size.

  • Help - G4 cannot see Time Capsule on Powerup

    Hi,
    I have one computer - an old G4, an iPhone and a PS3 connected to my Time Capsule (bought in May).
    -G4 is connected by Ethernet
    -PS3 and iPhone wirelessly
    I usually put my G4 to sleep, and wake it, and everything's fine.
    Twice now, the power has gone out, and when it comes back, the Time Capsule is green, and the PS3 and iPhone can see it. I boot the G4, and it cannot see it. The G4 also shows a date in 1969 (does that indicate other issues?).
    I have tried the following both times -
    Resetting the Time Capsule with the pin - does not work
    Unplugging and resetting the time capsule with pin - does not work
    Rebooting the computer and clearing out the PRAM - does not work
    Changing the date to after 2001 on the clock, - no help
    Of course, now that I've reset the time capsule, I can't configure it again and have lost the wireless connection.
    Last time I eventually got it to work - but it seemed random as to how. I'm frustrated, and I would like any advice possible. I hope it's the computer and not the Time Capsule. Any thoughts? Thank you in advance.

    Now I'm getting really annoyed.
    Went to see the mac genius today at the Apple store. Saw it wirelessly no problem.
    Saw it via Ethernet no problem. When I got him to check that there was a file on the hard drive he did it wirelessly though.
    Told me Time Capsule was fine (and I believe him). Told me to take it home, create a second ethernet connection, and trash preferences for "System Configuration" if necessary. Did all that, booted, found the Time Capsule no problem.
    Thought my problem was solved, but was it?
    Turned off the computer, turned it on a few hours later - will not see Time Capsule, Airport will not recognize it AGAIN. Tried trashing preferences and rebooting - it doesn't work.
    I'm able to connect the ethernet cable directly to the DSL modem and use PPPOE, it's fine.
    I don't get it. What else can I do?

  • Cannot see Time Capsule for backup but internet perfect A

    I've seen other posts about time capsule problems and most talk about wireless dropout and loss of internet connectivity. My situation is almost the reverse:
    Full airport strength in menu bar. Full access to internet sites on at least one computer. Cannot see Time Capsule via Airport Utility or in Finder on any computer. Time Machine backups fail (marked as Delayed in menu bar item).
    If I reboot (via unplugging) the Time Capsule, it shows up again in Airport Utility and backups are successful. This has happened three times now. I think the first time was prior to upgrading the firmware. The second two times were after the Time Capsule firmware upgrade. In the second two instances, it looks like the backups run for about 12-13 hours, every hour. No problems. Then, they drop out. Yesterday, it ran from 8:30 AM until 9 PM.
    I've got two Macs (a Powerbook G4 and a MacBook Pro), each running latest software updates (security, 10.5.2, etc.).
    Unplugging (rebooting) my Time Capsule each day is not an option. That's partly why I moved from an ancient LinkSys router that always needed to be rebooted since we lost local and internet access. Any help is much appreciated!
    Cheers,
    Drew

    Have you set up the TC with user accounts??
    Most people just use the TC password..
    I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
    What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
    If you didn't setup the TC, do you have admin access to it??
    Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
    Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
    If the TC is bridged an not controlling the network.. that can contribute to the issue.
    Setting a static IP on the TC if it is bridged my help.

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • Mac can not see time capsule

    i bought Time capsule over Amazon .Air port works fine , but my mac can not see time capsule,,,sometime does , but most of the time not...
    It is a problem with time capsule i have 2 T new generation

    You don't mention what type of Mac you have, but is there any way you can move it around to see if that affects the problem?  If you hold down an "option" key while you pull down the AirPort/WiFi menu bar item, you should see a value labeled "RSSI" that is the strength of the wireless signal.   A value closer to zero is stronger.  For example, -30 is decent but -80 is poor.
    By the way, you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post.  Those can help people give you correct advice.  To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile".  Scroll down to "My Products" and either edit an existing one or add a new one.

  • Parallels Win7 - Airport Utility cannot see Time Capsule

    Running Win7 as virtual machine on Mac using Parallels 5.0. Mac can see fully functioning time capsule but when I switch to Win7 virtual machine, airport utility will briefly see time capsule and then it disappears completely. Same happens with using bonjour printer wizard when the HP Laserjet connected via USB to the time capusle will first appear and then disappear after 5-8 seconds. Searched help forums and have not found a solution, and welcome any help please. Internet access via time capsule on Win7 virtual machine not a problem at all.

    Same issue, I found this http://forum.parallels.com/showthread.php?t=21064
    Time Capsule is not a complete product.

  • Windows 8 cant see time capsule

    How do i get Win 8 to see time capsule?

    This is the first time I have seen the question.. I guess it was coming.
    Did you have TC working with previous version of windows??
    Ping the TC and see if you can reach it. If not that is where to start.
    When you say.. see.. do you mean connect to the internet or use hard disk resources??

  • Windows Vista cannot see Time Capsule

    I had a network setup via Time Capsule with iMac, Macbook Pro and PC running Vista Business. I have lost internet connectivity on the PC and Airport utility cannot see Time Capsule. The PC is connected to Time Capsule via etherenet. How can I fix this?
    Message was edited by: doulos
    Message was edited by: doulos

    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
    Home Edition users would have to perform a Registry edit as follows:
    1. Open registry editor (ref: Start > Search > Enter: regedit)
    2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
    4. Restart your PC and try the connection again...

  • The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    You can store your iTunes library on a Time Capsule.  So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).  
    If you do decide to put your libray on Time Capsule I'd recommend doing this.
    Option 1:
    1.  Don't use TC as a Backup (Time Machine).
    2.  Connect a USB drive to your TC or Computer and backup to the  drive. Backup when a change is made to the library (adding Apps, Songs you get the idea). 
    Option 2:  (What Im doing)
    1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
    2.   Use TC1 as a Time Machine backup
    3.   Use TC2 as network drive.  (The information on TC2 does NOT get backed up to TC1).
    3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD.  I've been doing the or some time now.  Or connect to your TC and do an archive.
    I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection.  It's expensive, but does exactly what I expect.
    The most important thing is to safe guard your data in case of a failure.
    In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM.  What ever you decide to do make sure you have a GOOD duplicate (backup).

  • Can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    Yes, but it will be slow and expensive compared to just buying an external and plugging it in locally.

  • Tried for many times to buy fcpx but can't?

    hi
    tried for many times to buy fcpx but can't?
    prasad

    We need more information to help you. (We, users, in this group.)
    At the Apple Store, did you submit your Apple ID / PW successfully?
    What happened after that?
    Are you trying to upgrade from a trial version?
    What kind of messages are you getting?
    Basically, take us through, step-by-step, what happened when you go to buy the software from the Apple Store.
    There's also a chance that you paid for the app, and it's waiting for you to download.

  • Prompt, the unit HP Envy 110 with the Samsung tablet can be printed?

    Prompt, the unit HP Envy 110 with the Samsung tablet can be printed?
    This question was solved.
    View Solution.

    Yes, assuming you refer to an Android table.. If you refer to Windows 8 tablet please clarify.
    You may print through the local network using the HP ePrint mobile app.
    Follow those guidelines to find more about installing and using the app:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&cc=us&dlc=en&lc=en&product=5070125&tmp...
    Additionally you may also scan to your tablet using the HP Printer Control app:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03561640&cc=us&dlc=en&lc=en&product=5070125&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    You should be able to forward them to your e-mail, or you could use a text backup app from Google Play that will backup your texts and e-mail them to you (SMS Backup and Restore is an example).

Maybe you are looking for