Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
Trying to send "Message" on iPad 2 and keep getting message that "x" is "not registered with iMessage." Never happened on previous iPad. What does it mean and how do I solve?
Similar Messages
-
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
I am getting this error message when I try to open Facetime on my iMac desktop "This beta version of FaceTime has expired." What does it mean? How do I get it to work again?
The Beta version of Facetime is a free test/trial version that Apple placed on some computers in the past. It has expired -- to get a working Facetime version back you must go to the App store and purchase "Facetime for Mac" which will cost you 99 cents.
-
Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!
How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton -
Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph -
On my iPhone I have downloaded 2 songs when it gets to near processing stage it says unable to download what does this mean and will I still get charged and I have full connection
ThanksHey xemily92!
Try using the information in this link to resume this interrupted download:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If you cannot resume the download, you can re-download past purchases using this article:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
When I open my gmail account in firefox it tells me I need to download the new firefox 5.0.1 so I do. After download it tells me to move icon to applications folder, so I do. Then it ask about replacing my old and I say yes. Then it tells me it can't because of sufficient privileges for some of my items. Can you help?
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I recently ran the Utility Disk and was verifying the Hard Drive due to some permission issues and found a problem. It told me to run the application startup disk to do another diagnostic which I did. It confirmed there is an issue and gave me the following code = 4MEM/6/4000000:6x7a5db418. What does this code mean and how can I go about fixing the problem? Any wisdom with this would be greatly appreciated. Thanks!
the meanings to those codes are not made public and only Apple certified technicians have access to them.
-
This error comes up when I'm on the internet whether I am going to a website or checking my email. It seems to appear mostly when I am trying to close a tab...I'm running Windows 7 on an Asus Eee PC
This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
HP Touchsmart with a BIOHD - 8 error code. What does it mean and what can I do?
Computer keeps crashing. Ran diagnostics and it came up with the error code BIOHD -8 for the hard drive. What do I do?
Here are the specs and ordering options for your HP TouchSmart IQ526t CTO Desktop Computer. Since this is a configure-to-order model, I have no way of knowing the size of the hard drive in your computer. Please post the size of the hard drive shown on your order slip or in Windows. Sizes available for ordering were;
320 GB 7200 rpm SATA 3G (3.0 Gb/sec)
500 GB 7200 rpm SATA 3G (3.0 Gb/sec)
640 GB 7200 rpm SATA 3G (3.0 Gb/sec)
750 GB 7200 rpm SATA 3G (3.0 Gb/sec)
1 TB 5400 rpm SATA 3G (3.0 Gb/sec)
Here are some detailed instructions on Replacing the Hard Drive in your IQ526T.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
These restore reports appeared as shortcuts when I turned the computer on while some shortcuts I had disappeared.
Maybe your security software (anti-virus, firewall) is blocking Firefox.
Did you look in the settings there?
See also [[Firewalls]] and http://kb.mozillazine.org/Firewalls -
I'v also moved my library to an external hard drive as I'd run out of space. I don't know if this has caused the problem.
Any advice appreciated.Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.
-
I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help
Hi, reagans3.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with iMessage. I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H. -
I get a message that my iPad is running an unauthorized modified version, even though I'm currently running 4.3.3. What does it mean, and how can I solve this problem? Please help, i ve tried everything. Thanks
I bought my iPad 2 three months ago from apple, and all my updates re from apple through iTunes. Version 4.3.3 is the latest version I updated, have been trying hard to update 4.35 but I get error messages all the time when the update is almost complete. Everything was working beautifully since I bought it, but this update problem just cropped up last week. I need a way out pls.
-
SMS in Yosemite messages not working. "Not registered with iMessage"
Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
Thanks!Hi,
It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
There is one Error Messages that is seen that is known to be very similar.
This Error can only be fixed by Contacting Support.
What is does prove though is the The Apple ID in use can be rejected on a Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
It is called IDS: yourApple ID- Auth Token
If deleting this does not work try repairing the Keychain.
After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
Fixing and Apple ID/Account is free.
7:22 pm Tuesday; January 13, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Maybe you are looking for
-
Non-Interactive PDF Form scenario without rthe need of ACF
Hello experts, i have a question for you. I implemented Dynamic Non-Interactive PDF Form scenario and it works fine. But ... If some user wants to generate the PDF form it's necessary to install Active Component Framework on his computer. Problem is
-
hi Team, i have oracle package in local pc drive d:. how can i run that package in toad. can any one provide me solution for this regarding. regards prabhat
-
I'm quite new to EEM, so please bear with me. How can I handle interactive CLI commands. I want a script that detects when a configuration change has been made, and then copies the running configuration to a TFTP server. This is what I have tried:
-
Hello is BW370 enough for bw3.5 delta? Thanks SD
-
Query views not showing changes of a query
Hello All, I have a base query with about 20 query views from it. If I change something in the base query i.e. change number of decimal places on a key figure. I would expect this change to be shown in the query views. This is not happening. Shou