Trying to set console resolution to 1440x900 at startup

Hi, I've got an NVIDIA Quadro FX 1500M and I'd like to set my console resolution to 1440x900.
For starters, X works just fine. Everything goes great.
But when I boot into the console, I can't set a resolution any higher than 1024x768 which, on this laptop, looks pretty wonky. I've tried vbetest and having GRUB ask me at bootup, but nothing shows me an available resolution near 1440x900.
Any thoughts? Danke.

Hello
The solution is to use KMS (Kernel Mode Settings), to get the kernel to initialise the GPU itself, thus allowing every video mode in the console. This requires the nouveau driver.
Cheers

Similar Messages

Trying to set up mutt/console mail

I am at the wiki and specifically here: http://wiki.archlinux.org/index.php/Mutt#Sorting_Mail
I have getmail working with my Gmail, and just tried to set up procmail but it didn't seem to work. Where it indicates to create and edit the .procmail file, it doesn't specify where to put this file? I just put it in ~/.getmail/ as a best guess. I edited the file and ran getmail which continues to work but there is no sorting. Then in console I saw:
You have new mail in /var/mail/bobby
But I'm confused at this point as it's not sorting or I can't see how it is. I have ~/mail set up as per the wiki as well as /mail/cur, tmp and new. :?
TIA for any help

Thanks guys, and smurnjiff I have followed your blog posts but still cannot get it working. Here's my relevant files/settings (only have one gmail account):
.mutt/muttrc
set realname='Me'
set sendmail="/usr/bin/msmtp"
set edit_headers=yes
set folder=~/mail
set mbox=+mbox
set spoolfile=+inbox
set record=+sent
set postponed=+drafts
set mbox_type=Maildir
mailboxes +inbox +others
~/.procmailrc
MAILDIR=$HOME/mail
DEFAULT=$MAILDIR/inbox/
LOGFILE=$MAILDIR/log
:0:
* ^To: [email protected]
foldername
~/.msmtprc
# gmail
account gmail
host smtp.gmail.com
port 587
protocol smtp
auth on
from [email protected]
user [email protected]
password something
tls on
tls_starttls on
tls_trust_file ~/.certs/Equifax_Secure_Certificate_Authority_DER.cer
I run mutt and get this at the bottom of the mutt screen:
---Mutt: (no mailbox) [Msgs:0]---(date/date)---------------------------------------------------------------------------------------------------------------(all)---
/home/bobby/mail/inbox: No such file or directory (errno = 2)
However if I do mkdir ~/mail/inbox I get this in mutt:
---Mutt: (no mailbox) [Msgs:0]---(date/date)---------------------------------------------------------------------------------------------------------------(all)---
/home/bobby/mail/inbox is not a mailbox.
Last edited by colbert (2008-08-13 03:24:51)

HT2105 Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

Not a solution yet, but received the following from one of the tech people I've been e-mailing back & forth with.
"I'm sorry that you have been unable to submit your podcast. The podcast submission form is currently offline. When trying to submit the podcast you will receive this message "We are Currently Experienced Technical Difficulties". Once the issue has been resolved, I would be glad to inform you.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
Who knows, maybe the problem isn't with my feed after all.

I got an iphone 3g off a friend of mine and i have tried to set it up and it wont activate it says it cannot do this at this time and the server is down help me please

please help me please i got an iphone 3g off a friend of mine and when i have tried to set it up it says that (your iphonecould not be activated because the activation server is temporerally unavailerble. Try connecting ypur iphone to itunes to activate it, or try again in a few muinites. if this problem persists, contact apple support at apple.com/support) but it says the same when i connect it to itunes as well someone help me please

Hello tom,
I understand you are having issues activating an iPhone 3G. The following article addresses the exact error message you included:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
- Restart the iPhone.
- Try another means of reaching the activation server and attempt to activate.
- Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
- Try connecting to iTunes if you're unable to activate using Wi-Fi.
- Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore.
Thanks,
Matt M.

Setting the resolution of a Pages document

I'd be very grateful if some kind soul could tell me how to set the resolution of a new document in Pages.
I want to use Pages to create an advert for inclusion in a magazine. They need artwork at 300dpi resolution and preferably in jpeg format. I've tried adding an image (300dpi) to a blank Pages document then saving it as a pdf (via File>Print) then opening the pdf in Preview and saving it as a jpeg. However, the resulting jpeg is only 150dpi for some reason.
Any help (or easier method, or tip for what other application is more suitable for this job) would be much appreciated!
Michael

I'd be very grateful if some kind soul could tell me how to set the resolution of a new document in Pages.
I want to use Pages to create an advert for inclusion in a magazine. They need artwork at 300dpi resolution and preferably in jpeg format. I've tried adding an image (300dpi) to a blank Pages document then saving it as a pdf (via File>Print) then opening the pdf in Preview and saving it as a jpeg. However, the resulting jpeg is only 150dpi for some reason.
Any help (or easier method, or tip for what other application is more suitable for this job) would be much appreciated!
Michael

Informix: Error while trying to set up start or end key for index read

Hi all
Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
...while accessing a table.
The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
Best regards
JM

Ulf Akerberg wrote:
Hello
I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
I attach the stack trace from the exception, perhaps it will give someone an idea.
Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
If the application works when statement caching is turned off, then it implies a bug in the
informix driver to do with re-using a prepared statement. Is the PreparedStatement used
the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
this statement is created with a given SQL string, are the parameters for that SQL always
set the same way?
thanks,
Joe
>
2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
     at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
     at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
     at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
     at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
     at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
     at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
     at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
     at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
     at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
     at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
     at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
     at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
     at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
     at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards
JM

How do I set document resolution

I'm trying to create a pages document that can be exported as a pdf, then converted to an ebook for uploading to an iPad. I've set the document size to 5"x7.5" (2x3 ratio) but can't find a method to set the document resoluton to 120 dpi. When I create the files and convert them (regardless of which PDF quality I use), the pdf file is fine and displays properly, but the conversion splits each page of the pdf file into four separate pages. I'm guessing that's due to the difference in the resolution between 300 dpi and 120. Any ideas?

> I'm trying to create a pages document that can be exported as a pdf, then converted to an ebook for uploading to an iPad.
There are several formats for e-paper and e-book interchange, and the several formats are in two main document models. One set of formats follows from ISO 8879 Standard Generalized Markup Language and the other set of formats follows from ISO-IEC 10180 Standard Page Description Language. For instance, the e-Pub and HTML formats follow from ISO 8879 and the PostScript and PDF formats from ISO-IEC 10180.
> I've set the document size to 5"x7.5" (2x3 ratio) but can't find a method to set the document resoluton to 120 dpi.
In the PS and PDF family of formats, document co-ordinate space has no resolution (: it is resolution indepedent). Objects in the co-ordinate space can either be resolution-independent (: scalable shapes that only get a resolution when they are rasterised to a specific device, for instance, TrueType typography, Type 1 typography, lines, and boxes), or resolution-dependent, for instance, photography.
For resolution-dependent objects, applications support two workflows. Some applications such as Apple Pages work on the assumption that you set the resolution in the software you use for exposure correction, other applications such as Adobe InDesign and QuarkXPress work on the assumption that you can do this later when the publication is processed. However, since you can't upsample from a lower to a higher resolution successfully in QuarkXPress or InDesign, it makes no difference if you don't save the resolution you need from the source application software.
So, begin by selecting the photographs you want, correct the exposures, and save the exposures with the ICC profile for the colour correction space into a named folder at the resolution you want. Then place them in whatever application you want, and save into PDF.
> but the conversion splits each page of the pdf file into four separate pages. I'm guessing that's due to the difference in the resolution between 300 dpi and 120. Any ideas?
Since the document co-ordinate space in PostScript version twenty-something in the original Apple LaserWriter of January 1985 is always resolution-independent, it has been possible to tile several pages in the document space onto a single page in the device space of the printer. The number of pages you can tile depends in principle on the tiling geometry in the application that writes the page description program (2-up, 4-up, 8-up, 16-up and so forth), and in practice on the size of the printer format (A4, A3, A3 and so forth).
If a single page is split into several pages, then either the user has to have asked for this (for instance, when proofing a very large document co-ordinate space by tiling it onto a very small device space for a poster on a LaserWriter), or the user has to have accidentally made the settings for the printing system assume that this is the case. Without knowing what printer or what printer driver you have installed, a suggestion might be that your printer driver is passing the wrong information backwards to the system software. Printer drivers are made by printer manufacturers and may be specific to the printer model. You might have more luck if you ask the printer manufacturer's list. Otherwise, try the formatting option 'for any printer' when you write out your PDF page description program, open the page description program in Apple Preview, and then let the printing system do what it does - hopefully to your satisfaction.
Best,
Henrik

Setting HP53131 resolution in Labview

I am trying to use my HP53131A couter to read a 400Mhz signal with a precision of 1/10th of a Hz. the couter is capable of this but with Labview the precision seems to be set a 4 digits and I cannot reset this. I need 10 digits of resolution.
I am using the Drivers from the NI website to control the counter though GPIB.

I do not have an Agilent counter. Does the counter itself get set to 4 digits or the displayed value on the LV screen?
Many of the drivers do not implement every possible function of the instrument. You may have to modify the drivers to get what you want. For example the HP5313xA Read a measurement.vi converts the string received from the counter to a double and then displays it on an Extended indicator with 6 digits of precision???
Study the programming manual for the instrument. When you find the commands to set the resolution, send those to the instrument via simple VISA Write and Read functions and look at the returned strings. If the resolution you want is there, then you can look into modifying the existing drivers or writing your own.
Lynn

Setting monitor resolution in the login manager, before session launch

Hey guys,
I want to have SLiM set the resolution to "auto" once it boots. At the moment, it seems like it boots directly into 800x600, and not into my native resolution, 1366x768. Sometimes I have an external monitor connected as well, and it's a good deal larger.
I was thinking it would be possible to run "xrandr --auto" which does this for me, but I am unable to see how exactly this is done through SLiM.
If it becomes necessary, I'm willing to change login manager to something else. gdm, xdm, kdm, you name it.
Thanks,
gonX

Are you using a /etc/X11/xorg.conf file?
If not, then you may want to try setting up a basic one with settings for your video card, monitor, and screen that includes the resolution that you want slim to use.
Before XRandR, it was set up in the xorg.conf file.
Though, now that I think about it, if it's an issue with size of the fonts, I think that you can adjust that in the slim theme. I don't use slim or any login manager.
I find that it's easier for me to log in via the console and startx manually. That way if I break my X.... It's happened.
Anyway, HTH

[SOLVED] Freezing while "Setting Consoles to UTF-8 mode"

Hi everyone,
I recently ran a Pacman -Syu on my bare bones network boot HTPC. I rebooted for the first time today due to a network issue which caused the machine to freeze up(since it network boots it couldn't do anything with no network). Now when I reboot it seems to be freezing while performing the "Setting Consoles to UTF-8 mode" step. I am not sure what changed on the system as everything else appears to be in good working order. I don't even know where to start to troubleshoot this issue. I had a look through rc.sysinit and I can see the section but nothing seems amiss when compared to my other working machines here. I had a look through the log files but also nothing pops out. Any ideas?
Here is the latest log for pacman to see what was updated:
[2009-11-14 15:21] synchronizing package lists
[2009-11-14 15:32] warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
[2009-11-14 15:32] upgraded pacman (3.3.0-3 -> 3.3.2-1)
[2009-11-14 15:32] synchronizing package lists
[2009-11-14 15:32] starting full system upgrade
[2009-11-14 15:44] upgraded kernel-headers (2.6.30.5-1 -> 2.6.31.5-1)
[2009-11-14 15:44] upgraded tzdata (2009m-1 -> 2009q-1)
[2009-11-14 15:44] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2009-11-14 15:44] Generating locales...
[2009-11-14 15:44] en_US.UTF-8... done
[2009-11-14 15:44] Generation complete.
[2009-11-14 15:44] upgraded glibc (2.10.1-4 -> 2.11-1)
[2009-11-14 15:44] upgraded attr (2.4.43-1 -> 2.4.44-1)
[2009-11-14 15:44] upgraded acl (2.2.47-2 -> 2.2.48-1)
[2009-11-14 15:44] upgraded apr (1.3.8-2 -> 1.3.9-1)
[2009-11-14 15:44] upgraded bash (4.0.033-1 -> 4.0.035-1)
[2009-11-14 15:44] upgraded gcc-libs (4.4.1-1 -> 4.4.2-3)
[2009-11-14 15:45] ATTENTION DB PACKAGE:
[2009-11-14 15:45] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
[2009-11-14 15:45] upgraded db (4.7.25.4-1 -> 4.8.24-1)
[2009-11-14 15:45] upgraded libsasl (2.1.23-1 -> 2.1.23-2)
[2009-11-14 15:45] upgraded perl (5.10.0-6 -> 5.10.1-5)
[2009-11-14 15:45] upgraded openssl (0.9.8k-4 -> 0.9.8l-1)
[2009-11-14 15:45] upgraded libldap (2.4.18-1 -> 2.4.19-1)
[2009-11-14 15:45] upgraded apr-util (1.3.9-2 -> 1.3.9-3)
[2009-11-14 15:45] upgraded pcre (7.9-1 -> 8.00-1)
[2009-11-14 15:45] upgraded glib2 (2.20.4-1 -> 2.22.2-1)
[2009-11-14 15:45] upgraded atk (1.26.0-1 -> 1.28.0-1)
[2009-11-14 15:45] upgraded binutils (2.19.1-5 -> 2.20-2)
[2009-11-14 15:45] upgraded bzip2 (1.0.5-4 -> 1.0.5-5)
[2009-11-14 15:45] upgraded xextproto (7.0.5-1 -> 7.1.1-1)
[2009-11-14 15:45] upgraded xproto (7.0.15-1 -> 7.0.16-1)
[2009-11-14 15:45] upgraded fixesproto (4.0-3 -> 4.1.1-1)
[2009-11-14 15:45] upgraded compositeproto (0.4-2 -> 0.4.1-1)
[2009-11-14 15:45] upgraded dbus-glib (0.80-1 -> 0.82-2)
[2009-11-14 15:45] installed eggdbus (0.5-1)
[2009-11-14 15:45] upgraded pam (1.0.4-1 -> 1.1.0-1)
[2009-11-14 15:45] installed polkit (0.94-1)
[2009-11-14 15:45] upgraded kbproto (1.0.3-2 -> 1.0.4-1)
[2009-11-14 15:45] upgraded libx11 (1.2.2-1 -> 1.3.2-1)
[2009-11-14 15:45] upgraded consolekit (0.3.0-5 -> 0.4.1-1)
[2009-11-14 15:45] upgraded curl (7.19.6-1 -> 7.19.7-1)
[2009-11-14 15:45] upgraded device-mapper (1.02.33-1 -> 2.02.53-1)
[2009-11-14 15:45] upgraded dhcpcd (5.1.0-1 -> 5.1.3-1)
[2009-11-14 15:45] upgraded dialog (1.1_20080819-2 -> 1.1_20080819-3)
[2009-11-14 15:45] upgraded dmxproto (2.2.99.1-1 -> 2.3-1)
[2009-11-14 15:45] upgraded enca (1.10-1 -> 1.12-1)
[2009-11-14 15:45] The package is built using sysv ipc. If this causes segfaults
[2009-11-14 15:45] see included README file and rebuild the pkg --with-ipc=tcp
[2009-11-14 15:45] upgraded fakeroot (1.13-1 -> 1.14.3-1)
[2009-11-14 15:45] upgraded fontcacheproto (0.1.2-2 -> 0.1.3-1)
[2009-11-14 15:45] upgraded freetype2 (2.3.9-2 -> 2.3.11-1)
[2009-11-14 15:46] upgraded gcc (4.4.1-1 -> 4.4.2-3)
[2009-11-14 15:46] upgraded git (1.6.4.4-1 -> 1.6.5.2-1)
[2009-11-14 15:46] upgraded gnutls (2.8.3-1 -> 2.8.5-1)
[2009-11-14 15:46] upgraded groff (1.20.1-2 -> 1.20.1-3)
[2009-11-14 15:46] upgraded gzip (1.3.12-6 -> 1.3.13-1)
[2009-11-14 15:46] upgraded hal (0.5.13-2 -> 0.5.13-3)
[2009-11-14 15:46] upgraded sqlite3 (3.6.18-1 -> 3.6.20-1)
[2009-11-14 15:46] upgraded heimdal (1.2.1-6 -> 1.2.1-7)
[2009-11-14 15:46] upgraded inputproto (1.5.1-2 -> 2.0-1)
[2009-11-14 15:46] upgraded kernel26-firmware (2.6.30-1 -> 2.6.31-1)
[2009-11-14 15:46] upgraded module-init-tools (3.10-1 -> 3.11.1-1)
[2009-11-14 15:48] >>> Updating module dependencies. Please wait ...
[2009-11-14 15:48] >>> MKINITCPIO SETUP
[2009-11-14 15:48] >>> ----------------
[2009-11-14 15:48] >>> If you use LVM2, Encrypted root or software RAID,
[2009-11-14 15:48] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-11-14 15:48] >>> More information about mkinitcpio setup can be found here:
[2009-11-14 15:48] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-11-14 15:48]
[2009-11-14 15:48] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-11-14 15:48] ==> Building image "default"
[2009-11-14 15:48] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-11-14 15:48] :: Begin build
[2009-11-14 15:48] :: Parsing hook [base]
[2009-11-14 15:48] :: Parsing hook [net]
[2009-11-14 15:52] :: Parsing hook [udev]
[2009-11-14 15:52] :: Parsing hook [autodetect]
[2009-11-14 15:52] :: Parsing hook [pata]
[2009-11-14 15:52] :: Parsing hook [scsi]
[2009-11-14 15:52] :: Parsing hook [sata]
[2009-11-14 15:52] :: Parsing hook [filesystems]
[2009-11-14 15:52] :: Generating module dependencies
[2009-11-14 15:53] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-11-14 15:53] ==> SUCCESS
[2009-11-14 15:53] ==> Building image "fallback"
[2009-11-14 15:53] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-11-14 15:53] :: Begin build
[2009-11-14 15:53] :: Parsing hook [base]
[2009-11-14 15:53] :: Parsing hook [net]
[2009-11-14 15:57] :: Parsing hook [udev]
[2009-11-14 15:57] :: Parsing hook [pata]
[2009-11-14 15:57] :: Parsing hook [scsi]
[2009-11-14 15:59] :: Parsing hook [sata]
[2009-11-14 15:59] :: Parsing hook [filesystems]
[2009-11-14 16:00] :: Generating module dependencies
[2009-11-14 16:01] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-11-14 16:01] ==> SUCCESS
[2009-11-14 16:01] upgraded kernel26 (2.6.30.6-1 -> 2.6.31.6-1)
[2009-11-14 16:01] upgraded libcdio (0.80-3 -> 0.81-2)
[2009-11-14 16:01] upgraded libxext (1.0.5-2 -> 1.1.1-1)
[2009-11-14 16:01] upgraded libdmx (1.0.99.1-1 -> 1.1.0-1)
[2009-11-14 16:01] upgraded libdrm (2.4.13-1 -> 2.4.15-1)
[2009-11-14 16:01] upgraded libevent (1.4.11-1 -> 1.4.12-1)
[2009-11-14 16:01] upgraded libfetch (2.25-1 -> 2.26-1)
[2009-11-14 16:01] upgraded libgpg-error (1.6-1 -> 1.7-2)
[2009-11-14 16:01] upgraded libmms (0.4-1 -> 0.5-1)
[2009-11-14 16:01] upgraded libmpcdec (1.2.6-1 -> 1.2.6-2)
[2009-11-14 16:01] upgraded libmysqlclient (5.1.38-1 -> 5.1.39-1)
[2009-11-14 16:01] upgraded libpciaccess (0.10.8-1 -> 0.10.9-1)
[2009-11-14 16:01] upgraded libpng (1.2.39-1 -> 1.2.40-1)
[2009-11-14 16:01] upgraded librpcsecgss (0.18-1 -> 0.19-1)
[2009-11-14 16:01] upgraded libtheora (1.0-1 -> 1.1.1-1)
[2009-11-14 16:01] upgraded libxt (1.0.6-1 -> 1.0.7-1)
[2009-11-14 16:01] upgraded libxmu (1.0.4-2 -> 1.0.5-1)
[2009-11-14 16:01] upgraded libxpm (3.5.7-2 -> 3.5.8-1)
[2009-11-14 16:01] upgraded libxaw (1.0.6-1 -> 1.0.7-1)
[2009-11-14 16:01] upgraded libxfixes (4.0.3-2 -> 4.0.4-1)
[2009-11-14 16:01] upgraded libxcomposite (0.4.0-2 -> 0.4.1-1)
[2009-11-14 16:01] upgraded libxdamage (1.1.1-2 -> 1.1.2-1)
[2009-11-14 16:01] upgraded libxdmcp (1.0.2-2 -> 1.0.3-1)
[2009-11-14 16:01] upgraded libxfont (1.4.0-1 -> 1.4.1-1)
[2009-11-14 16:01] upgraded libxfontcache (1.0.4-2 -> 1.0.5-1)
[2009-11-14 16:01] upgraded renderproto (0.9.3-2 -> 0.11-1)
[2009-11-14 16:01] upgraded libxrender (0.9.4-2 -> 0.9.5-1)
[2009-11-14 16:01] upgraded libxft (2.1.13-1 -> 2.1.14-1)
[2009-11-14 16:01] upgraded libxi (1.2.1-1 -> 1.3-2)
[2009-11-14 16:01] upgraded xineramaproto (1.1.99.1-1 -> 1.2-1)
[2009-11-14 16:01] upgraded libxinerama (1.0.99.1-1 -> 1.1-1)
[2009-11-14 16:01] upgraded libxkbfile (1.0.5-1 -> 1.0.6-1)
[2009-11-14 16:01] upgraded libxml2 (2.7.3-3 -> 2.7.6-1)
[2009-11-14 16:01] upgraded recordproto (1.13.2-2 -> 1.14-1)
[2009-11-14 16:01] upgraded libxtst (1.0.3-2 -> 1.1.0-1)
[2009-11-14 16:01] upgraded libxv (1.0.4-1 -> 1.0.5-1)
[2009-11-14 16:01] upgraded xf86dgaproto (2.0.99.1-1 -> 2.1-1)
[2009-11-14 16:01] upgraded libxxf86dga (1.0.99.1-1 -> 1.1.1-1)
[2009-11-14 16:01] upgraded xf86miscproto (0.9.2-2 -> 0.9.3-1)
[2009-11-14 16:01] upgraded libxxf86misc (1.0.1-2 -> 1.0.2-1)
[2009-11-14 16:01] upgraded xf86vidmodeproto (2.2.99.1-1 -> 2.3-1)
[2009-11-14 16:01] upgraded libxxf86vm (1.0.99.1-1 -> 1.1.0-1)
[2009-11-14 16:02] upgraded python (2.6.2-5 -> 2.6.4-1)
[2009-11-14 16:02] upgraded lirc-utils (0.8.5-1 -> 0.8.6-3)
[2009-11-14 16:02] >>> Updating module dependencies. Please wait ...
[2009-11-14 16:02] upgraded lirc (0.8.5-2 -> 0.8.6-1)
[2009-11-14 16:02] upgraded lvm2 (2.02.48-1 -> 2.02.53-1)
[2009-11-14 16:02] upgraded man-pages (3.22-1 -> 3.23-1)
[2009-11-14 16:02] upgraded mesa (7.5.1-2 -> 7.6-2)
[2009-11-14 16:02] upgraded mlocate (0.22.1-1 -> 0.22.2-2)
[2009-11-14 16:02] upgraded nfs-utils (1.2.0-3 -> 1.2.0-4)
[2009-11-14 16:02] upgraded openssh (5.2p1-1 -> 5.3p1-2)
[2009-11-14 16:02] upgraded pango (1.24.5-1 -> 1.26.0-2)
[2009-11-14 16:02] upgraded pixman (0.16.0-1 -> 0.16.2-1)
[2009-11-14 16:02] upgraded popt (1.14-1 -> 1.15-1)
[2009-11-14 16:02] upgraded randrproto (1.3.0-1 -> 1.3.1-1)
[2009-11-14 16:02] upgraded sdl (1.2.13-3 -> 1.2.14-1)
[2009-11-14 16:02] upgraded sdparm (1.03-2 -> 1.04-1)
[2009-11-14 16:03] upgraded shared-mime-info (0.60-1 -> 0.70-2)
[2009-11-14 16:03] upgraded tdb (3.3.7-1 -> 3.4.3-2)
[2009-11-14 16:03] upgraded smbclient (3.3.7-2 -> 3.4.3-2)
[2009-11-14 16:03] upgraded subversion (1.6.5-4 -> 1.6.5-5)
[2009-11-14 16:03] upgraded tre (0.7.6-1 -> 0.8.0-1)
[2009-11-14 16:03] upgraded wavpack (4.50.1-1 -> 4.60.0-1)
[2009-11-14 16:03] upgraded wget (1.11.4-2 -> 1.12-1)
[2009-11-14 16:03] upgraded xbitmaps (1.0.1-2 -> 1.1.0-1)
[2009-11-14 16:03] upgraded xcursor-themes (1.0.1-2 -> 1.0.2-1)
[2009-11-14 16:03] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.0-1)
[2009-11-14 16:03] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-11-14 16:03] upgraded xfsprogs (3.0.1-2 -> 3.0.5-1)
[2009-11-14 16:03] upgraded xorg-apps (7.4-2 -> 7.5-2)
[2009-11-14 16:03] upgraded xorg-font-utils (7.4-3 -> 7.5-2)
[2009-11-14 16:03] upgraded xorg-fonts-alias (1.0.1-2 -> 1.0.2-1)
[2009-11-14 16:03] Regenerating font encodings... done.
[2009-11-14 16:03] upgraded xorg-fonts-encodings (1.0.2-3 -> 1.0.3-1)
[2009-11-14 16:03] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-11-14 16:03] upgraded xorg-server (1.6.3.901-1 -> 1.7.1.901-2)
[2009-11-14 16:03] installed printproto (1.0.4-1)
[2009-11-14 16:03] installed libxp (1.0.0-3)
[2009-11-14 16:03] upgraded xorg-utils (7.4-4 -> 7.5-1)
[2009-11-14 16:03] upgraded xorg-xauth (1.0.3-1 -> 1.0.4-1)
[2009-11-14 16:03] upgraded xorg-xkb-utils (7.4-2 -> 7.5-1)
[2009-11-14 16:03] upgraded xterm (246-1 -> 250-1)
Any help would be appreciated as I am currently not able to boot the machine.
Thanks,
Kevin
Last edited by ould (2009-11-23 13:41:40)

This is interesting since I still have the issue on my system, I havn't yet reverted to an older kernel but was thinking the kernel package is the likely issue, using version kernel 2.6.33
I take it this isn't a common error? is this possibly a 64 bit kernel error or a video related error?
Still no answer from me yet, not that I have spend a great deal of time trying to look at it. annoying though.

How to set screen resolution on Apple TV Gen2

This is my first bad out of the box experience with an Apple product. I got my brand new Apple TV Gen 2 and hooked it up to our Sony Receiver/TV.
Plugged everything in. Turned it on and I got the screen but am not able to change resolution. With the current resolution I can not see all the menus and the display does not fit on the 40" display.
Tried unplugging.
Tried doing a reset.
Tried holding the Menu & Down arrow
Tried looking through the menus, such as Settings, Video & Audio but can't find anything on setting screen resolution
Tried searching this forum for instructions for changing resolution
Much appreciation in advance for any tips or magic tricks on setting screen resolution.

i also have this problem. i had a long discussion with apple support and the result was that apple tv 2 is not build for connecting it to a receiver but only to a up-to-date flat TV. i don´t know how i managed it to use the 720p resolution but as i had it i set the auto power to off and let it switched on all the time.
after the update to 4.2.1 it had no chance to get it to 720p. it is locked to 1024x768 which is not the resolution i want to watch HD movies.
but my setup is not a normal one. i have a onkyo AV receiver which is sending the HDMI signal over a HDMI splitter to an LCD screen and a HD beamer. the LCD screen is an old one which has no HDMI input, i use a HDMI to analog-component converter for this. the HDMI output of the onkyo is connected to a wireless HDMI system from marmitek.
so its not so the ideal setting for apple tv. i hope that everything works fine if i have a new flat TV with a normal HDMI input.

Can I create a custom resolution of 1440x900 for my retina screen in a bootcamp Windows 7?

I was wondering the best setting for using Windows 7 on my Retina screen with the intention of gaming. I was thinking that 1440 x 900 would be the best resolution as 4 retina pixels will map exactly to 1 on screen pixel. Unfortunatey this does not exist in the settings.
NVIDA does allow custom resolution but gives a big warning about it destroying your screen - so I thought I would ask before I create one. If I create a custom resolution of 1440x900 and leave all other settings as default, will this be ok for the retina screen?
Also, am I barking up the wrong tree? Should I set it to a different already support resolution?
What do other people find the best resolution for gaming?

As far as I know, you're limited to what is provided; there's no way to customize it.

How to set Movie resolution with JMF player

Hi everyone,
I am opening my .mpg files with the help of JMF.
The movie sample is of resolution 160 X 300.
I want it should fit into area of 670*670, 330*670 , 330*330 ,250*250.
I tried to set panel size but it failed.
I tried to set visualComponent size but again failed.
I have one restriction that JFrame should not maximized it fixed according to my resolution(1024*768)
Please help me.
public void controllerUpdate(ControllerEvent c)
          if (player == null)
               return;
          /////adding visualComponnt to jpanel
          if (c instanceof RealizeCompleteEvent)
               if ((visualComponent = player.getVisualComponent()) != null)
                    Dimension d1 = new Dimension(670, 670);
                    visualComponent.setMinimumSize(d1);
                    visualComponent.setPreferredSize(d1);
                    player.prefetch();
                    updateUI();
                    add(visualComponent);
     }

tom_zhang wrote:
How to use MediaPlayer object SetBounds method to change movie's resolution to 330*330 ?Well - 'don't'. Java layouts typically honour the preferred size in relation to the current layout constraint, than any 'bounds'.
Only can same scale zoom visual componentTo help further, I would need to see an SSCCE.
BTW - had you considered adding (the visual component of) the player to the CENTER constraint of a BorderLayout, and putting all that in a JFrame that is resizable? Then the user can choose whatever size they want to view the video, by dragging the frame to the desired size.

Text Console Resolution

Hi, i have a problem ... how can i change text console resolution for ex. 1024x768 ?? I tried add vga=792 in grub kernel entry (like in RHEL) but it doesn't work. Can somebody help me ??

Hmm, i'm not sure if you can do that. On SPARC i think you can change it by editing the output-device variable in the OBP (even if i don't remember if that affects the text console). I'm not certain if its possible on an x86 platform.
.7/M.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
anyone have any idea

Hi
Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
Daryl

Trying to set console resolution to 1440x900 at startup

Similar Messages

Maybe you are looking for