Trying to set up a home network

I used to have an iMac G4 and a PowerBook G4 and a magicolor 2430DL laser printer hooked up to a small network via an ethernet switch. I have a slow dialup account with CWNET. I replaced the PowerBook with a MacBook and got an Airport Extreme Base Station. I unplugged the phone line from the Mac and plugged it into the BS. First I figured out how to get the MacBook online through the BS. It was challenging, but I finally discovered that I had to open the Airport menu in the menu bar, go down to the BS, slide over to Connect, and then it would dial into my ISP. There was no Connect button in Internet Connect like the Help told me there would be. OK, so I'm online with my Book. I think the next thing I did was to connect the BS to the network switch. To my pleasant surprise the iMac was online in no time. (I think. So much has gone wrong since I may be imagining it.) Then I figured I'd see if I could print. The Book wouldn't see the printer until I connected the printer directly to the BS with USB. But then the iMac wouldn't print until I connected the printer back to the hub with ethernet. Then I tried going back online with the iMac, but it won't go. The location is set to Ethernet. Then I tried to network the Book with the iMac and they don't see each other any more.
What do I need to do so that the iMac can be online via the BS, the Book can see the iMac, and both the Book and iMac can print?

The MacBook is wireless, and the iMac is wired. Since it is a G4 flatpanel I figured it would do AE so I bought a card and then after waiting a few weeks after I got the card I tried to install it, but my iMac doesn't do Extreme, and it was too late to take the card back so now I'm stuck with a new AE card that I don't know what to do with. I waited because the card came long before the MacBook and AEBS came, so there was no rush to put it in or so I thought.
Anyway, I have the 5-port switch connected to the LAN port of the AEBS. I just connected the printer to the AEBS via USB. The printer is still connected to the switch also. Now the MacBook prints.
But the iMac doesn't. Let's go to Printer Setup and delete the printer and Add it. For some reason there are two different names that show up for the same printer. Lets see what happens when I use the same name the MacBook uses... Now the iMac prints. But does the iMac print through the AEBS so that I can disconnect the printer from the hub and free up one of the ports? Yes! It is working!
Now can I still get online with the iMac and still connect to the MacBook with the iMac? It is online. It is connected to the MacBook! Oh man this is so sweet.

Similar Messages

  • Trouble setting up a home network

    Hi,
    I have the Actiontec M1424-WR router.  I am trying to set up a home network with a Desktop on XP and a Laptop on Vista.
    I have been able to creat a network if the Desktop and Laptop are both connected to the Router with Cat5 Cables.
    I can not set up a network if I have the Desktop connected via the Cat5 and the Laptop using the Wireless Card.
    I've called VZ, won't help.  I've emailed Actiontec, couldn't help.  I've Googled etc.  I'm stumped!  This can't be a unique situation.
    If anyone can help it would be much appreciated. 
    Thanks!

    Log on to the computer.
    Click the Start button ‌, and then click Connect To.
    Choose the wireless network from the list that appears, and then click Connect.
    Type the security key (which is the WEP key stamped on the Routers tag) and then click OK.
    You will see a confirmation message when you are connected to the network.
    To confirm that you added the computer, do the following:
    Open Network by clicking the Start button and then clicking Network.
    You should see the icons for the computer you added and for the other computers and devices that are part of the network.
    Side note:It’s important to use the same workgroup name for all of the computers on your network. This makes it possible for computers running different versions of Windows to detect and access each other. Remember that the default workgroup name is not the same in all versions of Windows.
    Joe D
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

  • I want to set up a home network to be able to watch my movies and litsen to music across multiple platforms without keeping my laptop connected.

    I want to set up a home network to be able to watch my movies and litsen to music across multiple platforms.  I have movies purchased from itunes as well as movies from my DVD collection that i converted to an .m4v format.  I currently have these movies stored on an external harddrive. To watch a movie on my apple tv I have to ensure my external hard drive is connected to my macbook pro, then play the movie on my macbook pro and "mirror" it to my apple tv.
    Ideally I would like to be able to watch movies from my collection without having to have my laptop on and work from that.  Is it possible to navigate my collection from my Apple TV and play it on my Apple TV.  My macbook pro is the machine I primarily use for work and school it is quite the protological nuissance to have to hook all that up everytime I want to watch a movie.
    My thoughts are that I could take my old dekstop pc, attach an external hard drive to that and make that my "media storage".  If I were to do that would I then be able to watch movies as well as select which movie I want to watch from my library through my apple TV without my macbook pro being in the equation?  Or if I should desire to watch a movie from my library through my Macbook Pro, Iphone 4s, and ipad is that possible?  I basically want to set up my library to be accessible from any of my devices.
    My devices are; the previously mentioned Apple Tv, macbook pro, iphone 4s, ipad 3. I also have a desktop PC running windows 7, xbox 360 and playstation 3 (the xbox and PS3 would be nice if they could too but wouldnt break my heart as they are my roommate's and not mine so I rarely use them.)
    Thank you for any help/advice you guys may have!

    atv's can only access media from
    1. a computer which is turned on running itunes
    2. the internet
    no other options
    and NAS's which say they can work as itunes libs don't work

  • Getting error message (-3150) when trying to set up itunes home share

    getting error message (-3150) when trying to set up itunes home share

    Hey there dahliafromphiladelphia,
    If you're unable to set up Home Sharing in iTunes on your computer, then I'd like you to please follow the directions in the article below.
    Troubleshooting Home Sharing - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Setting up a home network: AirPort Extreme & AiPort Express

    I'd like to setup my home network with both my new Aiport Extreme and my existing AirPort Express.
    Ideally, the setup would be as follows:
    Ethernet Network Connection + External HD via USB --> AirPort Extreme
    Home Speakers --> AirPort Express
    I know that I want my Extreme to act at the main, then the Express to operate on the same network as a relay or remote. I've tried to follow all of the online support documentation to manually configure a WPA. No matter what configuration I use, I run into trouble.
    Any advice?
    MacBook 2 GHz Intel Core 2 Duo Mac OS X (10.4.9) 2 GB 667 MHz DDR2 SDRAM

    From your post, I assume you have the new square 802.11n Extreme. Download the Airport Utility (it is not the same as the Airport Admin Utility) from the disk that was provided with the Extreme. It is a little round icon with a blue Airport Symbol in the center and is below Airport Admin Utility in your Utilities Folder. You may have to do a factory reset on the Extreme and I know you're going to have to do one on the Express.
    Set your system up on the Extreme first after factory reset. Choose the type of security you wish to use. Call the system something different than your original system like putting use "New" before the system name. You can't carry forward either system names or passwords to the new system. Then when you set the password for security I'd use something different than the original password.
    Once your system is built, do a factory reset on the Express by using a paper clip or ballpoint pen. Unplug the Express, push in on the reset button with the paper clip or pen point. The while still depressing the reset button, plug the Express back into the outlet. You'll get a few quick green light flashes, then several rapid blinking amber lights. Wait until the amber light stops blinking then you can stop depressing the reset button. It takes a few minutes for the Express to come on line.
    Go to the Airport Utility and you should see your Extreme as the base station and then the Express will come up with the factory ID.
    Configure from there.

  • Setting up a home network using the new USB551L modem

    I have recently switched from the 3G USB760 modem to the new 4G LTE USB511L modem. Since I live in a very rural area, it is one of the few internet options that I have and I am forced to use it for my home. I previously set up a wireless network using the previous modem by connecting a wireless router to my computer by ethernet cord. I then went under the properties of the connection in order to allow other computers/devices to use the connection. Since switching to the new USB modem, the network does not appear under the list of options when using the Windows 7 network connections icon in the lower right corner of the screen. I am trying to set up a similar wireless network for my house but I am having difficulty. It seems that everything will connect to the wireless router but the router is lacking internet connection. Any advice is appreciated. 

    Your best Option use th eUSB551L in a Hybrid Router:
    The MBR95 will work for your situation plus it has 4 etherent ports if you need it, you can connect your network/wireless printers, android, ipad, ps3, xbox, nintendo wii, DVR, satellite, etc....
    http://3gstore.com/mbr95
    Combine it with a Full Band 3G/4G Hybrid Antenna and you got the best of all worlds
    http://3gstore.com/product/3047_3g4g-full-band-outdoor-omni-antenna.html

  • Trying to file share on home network

    I have an AEBS running my home network. The network computers are two MacBooks connecting wirelessly, and an iMac which is connected to the AEBS via ethernet.
    We can all see each other's Macs. From the iMac, I can drop files into the MacBooks' Public folders. However, the MacBooks cannot connect to the iMac. They can see it, but they get "Not Connected" when trying to navigate to the Public Folder. File Sharing is enabled on all the Macs. Privileges seem to be set correcly on all machines.
    Why can't the MacBooks connect to a Public Folder on the iMac?

    I noticed, too, that, when you click on the "Connect as..." button on either of the MacBooks, the dialog only gives you the option to connect as a registered user on the iMac. There's no option to connect as Guest.
    When I do the same on the iMac (to connect to the MacBooks) I get the option to connect as either a guest or registered user.
    FWIW, firewalls are off on all Macs.

  • Set up a Home Network? How do I do it & should I merge my accounts?

    Hi Folks - this is my first post and its quite long, so please bear with me as I give you a bit of history of my problem.
    I bought a iMac and hooked it up to a Seagate 500GB hard disk using Time Machine in my study and connect to my ISP via WiFi using a standard router. I then set up two user accounts - one for me & one for my wife and sync'd them both to our MobileMe accounts.
    Later I bought a Mac mini to use as a media centre in my lounge. It hooks into my HD TV through the mini-DVI port and I have a Elgato Eye hooked up via a USB port that links up to my Sky HD+ satellite box via a S-Video cable and AV component leads. I'm using a Mighty Mouse and an Apple Bluetooth keyboard via bluetooth. It has no external back-up hard disk and Time Machine is not set-up.
    When I set the Mac mini up, I wasn't quite sure what was the best way to set it up, but I used the Apple Set-up function to copy files & settings over WiFi from the iMac to the Mac mini for both user accounts. So I ended up with a compete copy of my iMac desktop/settings/files on my Mac mini with both accounts set-up with access to our MobileMe accounts.
    I wanted to change the layout of my dock on the Mac mini to remove some Apps (iWorks & MS Office). When I then subsequently logged into my iMac, the dock there was now different ie. the same as the Mac mini. So in order to keep my iMac dock different from my Mac mini dock, I changed the user account names on the Mac mini to a new naming convention 'Name - Mac mini'.
    I only wanted my media files on the Mac mini and all my other docs (spreadsheets, word processing etc) on the iMac, the idea being the iMac becomes a workstation and the Mac mini the media centre.
    So I deleted the relevant files off each mac. I then set-up network file sharing on both and can log into either via Finder to be able to get access to retrieve/access any files I need from either Mac - but this only works if both are on. Now I'm not so sure this is the best set-up.
    I've now started to fill up my Mac mini hard drive and I thought I would add some more storage and it would be great if I could back up both the iMac and Mac mini via Time Machine to a hard drive. A friend suggested using NAS storage for this as he does that with his iMac & Apple TV.
    So here's my two-part dilemma (appreciate your patience so far)....
    Dilemma No. 1: - What should I do for my storage solution?
    I can see the advantage of moving all my media & documents to the one shared network and being able to access them no matter what Mac I am using without the other having to be turning the other one on.
    I'm considering buying something like a Buffalo Linkstation NAS and connecting to the Mac mini via ethernet.
    Dilemma No. 2: - What should I do with my multiple accounts? Merge or keep separate?
    I get a little fed-up having to go downstairs and switch on the Mac mini to watch a TV show if I am upstairs on the iMac or if we are in the lounge browsing the web and want a file from the desktop iMac I have to run upstairs and switch that on.
    I know I could leave them both on sleep mode but I do like to turn them off now and again.
    I fI go for a NAS solution, should I keep the accounts separate?
    What's the best solution for both my dilemmas and are they interlinked? As an aside, I know very little about home-networking and what equipment I would need and how I would go about setting it up.
    Any help you can give [if you're still awake after reading this ] would be most appreciated.
    Cheers.

    I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

  • Setting up a home network

    I have an IMAC running tiger and a macbook running Leopard.
    I wnat to purchase a NAS (possibly a mini Stack) so that files can be shared so it doesn't matter what computer my kids get on they'll have access to their files, music, email, etc. I'm concerned about setting up the NAS so each of their accounts can be accessed.
    Also, on my office network I can syncronize my laptop with our server so I still have access to my files even if I'm not on the network. I'd like to have this same capability on my home network if possible.
    Any help with a home network set up (Ideas, books, websites, etc.) is greatly appreciated
    Thanks!

    This could cause problems, different versions of the same app, one Tiger and one Leopard, overwriting preference files or using different versions of the (iTunes/iPhoto) library/index file that won't reflect changes in the other version...sorry I don't have a suggestion for how to deal with that other than to upgrade both machines to the same OS version and apps, if possible.
    Also, how old is the iMac, is this an older G3, G4, or G5 iMac? Then you also have to worry about which apps are PPC only, Intel only, or Universal apps.

  • Setting up a Home Network w/ Snow Leopard server

    I would like suggestions on how to best configure a home network.
    One of my main goals is to enable my 5 kids to share 3 computers and my mini server.
    I would like them to each have an account with the same files and set up available on each computer.
    My wife and I also have laptops connected to the network.
    My computers are listed below.
    I have Airport extreme and some external hard drives also.

    jpadilladeborst wrote:
    Is it advisable to use the same Hard Drive that the server is running off as a sharepoint?
    It doesn't matter too much - the only issue is from a restore point of view - what will you lose if the server creams in? From that perspective, it probably makes sense to have the OS on one drive and the 'shared area' (if that's what you're going to do) on the other drive. Then, once you have everything set up and working how you like, use Disk Utility or CarbonCopyCloner or something similar to image the OS drive onto an external HD for speedy restore purposes, and maybe set up Time Machine on the server itself to back up the shared area and probably the /Users/ directory to another external drive - 1TB+ if you have it.
    Remember that in order for the drive to be useable as a TM destination, it has to be formatted in a way that OS X can understand, so GUID partition table and probably Mac OS Extended (Journaled). The reason I point that out is that some NAS drives (you mentioned a Hip something or other which I'm not familiar with but may fall under this category) run their own partition tables etc, sometimes even running their own OS (which can be Win 98 or similar) thus rendering them useless from this point of view.
    Other things to think about are how you're using your space. Remember that if each user account has iTunes with a load of songs, that is going to suck up space on your server very quick. If that's the case, perhaps consider dumping everyone's songs onto a sharepoint and setting that as the iTunes storage location for each user's iTunes. Alternatively, with iTunes 9 you can now share music libraries between multiple computers (providing they're all using the same Apple ID). Of course that throws up iPod/iPhone syncing problems, so keep it all in mind.
    Furthermore (I think you've already mentioned this), see what you can put on the shared area instead of in users Documents folder. For example, if one of them has a load of family photos - put them all on the shared area. Stuff you don't want the kids to have access to (financial documentation etc) can still be put on the shared area, but can be protected with user account-based permissions (this is where server OS's and networked user accounts really come into their own), or just leave within one user account.
    And for goodness sake, especially if you have things you don't want the kids to have access to, don't let the main server account be the one that the kids use to log on to the server for every-day purposes, since they will then have access to everything (since the main admin account on any mac is by default 'root', which means it is the account which is allowed to do absolutely anything to an OS, including changing permissions etc etc)

  • Setting up my home network

    Hi guys,
    I want to setup my home network with my devices and I would like to know the best setup possible.
    I have to configure:
    1X 2TB Time Capsule
    1X Airport Extreme
    2X Aiport Express
    The 2 Express are for speakers in differant rooms.
    I can not link any with ethernet cables. Unfortunately.
    It has to be wireless.
    How I did set it up before was the TC was the master hooked up to the modem and all the other were setup as extende wireless network.
    The result was not very good. Often I have cut and dops form my laptop and with the remote app.
    How would you recommande to set it up?
    Cheers,

    I can not link any with ethernet cables. Unfortunately.
    Have you ruled out powerline adapters? They can sometimes work pretty well, bridging distances that wireless can't.

  • I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

    but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

    Start here.
    http://www.apple.com/support/ipad/assistant/wifi/
    http://support.apple.com/kb/TS1398

  • BEFW11S4 Setting up complete home network

    I just set up a new computer and for the first time in a very long time I'm using the Linksys router we've had because we have more people in our house now than before. So I have wireless internet all set up on our laptops and I have an ethernet cord running to my desktop. I want to set up a wireless network so that I can have a shared folder that all the computers can access and I want all the computers to be able to remotely connect to each others music. My laptop (wireless) seems to be able to connect to both my desktop and my GF's laptop remotely to access their shared folders and my desktop's music. My desktop on the other hand is having trouble. It seems like it connect to my GF's laptop and access her shared folders but it can't connect to my laptop... would I be able to get a basic rundown of all that I would need to change/set so that everything is accessible and good? Mainly just the shared folder among everyone would be cool but the music would be a benefit.

    Well try upgrading the firmware of the router & keep on holding tightly
    the reset button in such a way that power light is blinking on the
    router & then do a complete network power cycle i.e., unplug the power
    cables from the modem & from the router & then plug in the power cable
    to the modem first once all the lights are solid green you could plug
    in the power cable to the router & check out it will definately work!!

  • Setting Up Wireless Home Network

    We are building an g+4 story apartment for residential purpose. I wanna setup an wireless network for internet, file sharing, multiplayer games n for other purpose. I have few que regarding it. 1. Is it possible to set up an wireless network for g+4 story building? What is the coverage of an wireless router or something like that? 2. What would be approx. cost for building tis wireless network? 3. Which 1 wud be best, Wired r wireless? 4. Which router 2 go for? 4. Is it possible to connect TV with computer with this wireless network? or is there a wifi featured TV? Thanks in advance

    The signal from wireless access points can cover 2 floors, maybe 3, depending on the material of the building. But if I had that setup, I'd have a wireless router on the floor where the modem is and an access point per floor and user an N one where the gaming devices are located. I prefer a wired connection for the access points but wireless in repeater mode is ok too.
    The box said windows xp or better... So I installed Linux!

  • Frustrated trying to set up a wireless network with Bellsouth Fastaccess's Westell Wirespeed modem.

    Today, about 6 hours ago in fact, I came home with a Linksys WRT54G wireless router. It took me a while to get a grasp on how to connect it. I had no network port on the back of my PC, as far as I knew, and I had been connecting my Westell Wirespeed modem to my PC via USB for years. In the end I ended up spending an hour digging up the old Ethernet cable that came with the modem, and finally managed to do everything the Router setup program asked of me.
    One hour after restarting multiple times, experimenting with different orders of plugging in things, and countless resettings of the Router AND the modem, it finally set up the network. It ran for an hour.
    One of my cats ran behind my computer, jarring one of the cords and causing the PC to turn off. It happens twice or thrice a year when they get rowdy. When I jiggle all the plugs back into place and turn on my computer, the connection was dead! Gone! And there was nothing in my Program Files that said "Start Linksys Network" or anything convenient like that. I suppose that would be too easy, right? And my internet didn't work either! So with no other choice, I opened up the installation program again - there was no trace of any sort of folder or application on my PC linked to the router. In fact, as far as I can see, I still have no way to get into ANY sort of router-related application aside from the install CD.
    So I stuck that back in there.
    I've spent the last three hours grueling over this thing. I connect it all before turning the PC on. Nothing. I disconnect everything and plug it all back in meticulously step by step according to the program. Nothing. The install program always gets through the PC checking, and lets me fill in the PPOE (or whatever) information. As it tries to update the router configuration, though, it tells me one of two things.
    1 ) If I have just done a reset of the router, it gets to 99% in the router configuration progress bar before telling me the 'router configuration failed'.
    2 ) If I exit the setup program and reopen it, I get a generic "So and so has caused an error in 4746545x48345675 (or some other random number)," and asks me to either Cancel or Debug.
    My hands are sore and I'm stressed to the limits. I bought a laptop a week ago for the sole purpose of alleviating the battles my kids have over the only source of internet in the house, but it's just been sitting there. I'm really at the end of my wits. Between the errors that don't tell you what went wrong and the perfectly-connected router that keeps pretending it's not connected, I'm just about ready to return the laptop.

    This happened to me when I was setting up the wireless router for a friend.  The issue is with the Westall modem.  You need to go in and setup the "bridge" option on the westell modem.  The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
    http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
    Good luck
    Solution:
    Method 1 - Hard Reset
    Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
    After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
    Method 2 – Bridged Mode
    Access the Westell interface using http://192.168.1.254 or http://launchmodem.
    Click on the Broadband DSL Line button. 
    Click on the Protocols button 
    Select the radio button to the left of Option 2 (Bridge)
    Click the save button. Once the modem has restarted it is in bridge mode. 
    ALL STEPS COMPLETE

Maybe you are looking for