Trying to set up second Actiontec MI424WR for MoCA
I've been struggling to figure out how to set up a second MI424WR via MoCA upstairs in my house, and have gone through several different forums seeking answers. I had a Verizon technician in today and information he provided conflicts with what I've read on these forums so I was wondering if someone could set me straight.
I have 2 MI424WRs, my original rev D in my basement which works fine, but doesn't reach our second floor, and a rev F I'm trying to set up on the second floor. The rev D connects to the internet via ethernet, and uses coax for television. I have a 5-1000mhz splitter on the second floor between a cable box and the rev F router. I have reserved up to 192.168.10 for static IPs and released the rev F of DHCP. The internet works very briefly, and very unreliably on the rev F.
So my question is this: I was told that what I want to do is not possible. The technician claimed that switching my ONT's internet to Coax would still prevent me from doing what I'm aiming for. Is this the case? His suggestion was to use the Verizon Network Range Extender WCB3000N, which from what I understand uses MoCA to function... so if that's all correct then why won't my rev F also work?? Very confusing, I appreciate any help!
ONT REPLACEMENT and switching to Ethernet are totally unnecessary. The communication should be strickly over the COAX between the two routers if you configured this as DSL suggests. You must remember to configure the second router NOT to connect to the ONT which is described in those recommendations for disabling wan access. http://www.dslreports.com/faq/15984
Possible problems could be not disabling DHCP and WAN access on the seceond Actiontec, bad coax, and bad splitters.
Similar Messages
-
I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.
If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter. -
trying to set up an apple id for a friend. it says email is already in use. but when i search for the id using this email it says no apple id associated with this email address.
Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
I have an apple id myself which my children share, i am trying to set up an apple id for my daughter but it says that the id already exists?? which it shouldnt!
I have tried taking her Mac and ipod off my devices but it still wont let me set it up!! any ideas anyone??Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
-
I am trying to set up a group contact for my golf league, but can't find a way to do this on the iphone
That's because you can't. You make the contact group on the computer application with which you're synching your contacts. Or you can find an app in the app store.
-
Hi,I recently downloaded sentinel mobilesafe to my iphone 4s. When trying to set it up,it asks for the phones name. What is this and where do i find it? Thanks
Thanks Clyde will try it.
-
have tried to set up an itunes account for my sons ipad but tells me he doent meet min age requirement what the !!!!!
Welcome to the Apple community.
If your son is under 13, then you will need to set up an account for yourself and allow him to use it. -
how do i verify my icloud I've been trying to set up my icloud account...it's telling me to check my email to verify. there's nothing there. I can log in with my apple ID but that is it??? HELP
Have you tried your spam folder? it could have gone there by default. also, are you sure you put the correct email in for iCloud?
-
I am trying to set up icloud emails on outlook 2010. It only lets me add 1 email rather than two. One is for me and one for my husband.
Maybe you should ask on a Microsoft forum rather than one dedicated to the using the iPhone in an enterprise environment.
-
Need help setting up second actiontec router
Need step by step instructions to add a second actiontec router over coax to increase by wifi range to a different part of the house. I have verizon fios 73/35. I recently upgraded by router to the Actiontec rev I and I would like to use the left over router (also an Actiontech router) in a area with poor wifi coverage. My main router is an Actiontect rev I that I have my computer hooked up to. What is the procedure to make this work. I hear I have to make it a MoCa connection and use it as an access point. I'm moderately challenged when it comes to understanding all this computer jargon and need some help in basic laymens terms. (I do learn easily though and willing to get technical). THanks
I used this document myself when I did the same thing. Sounds like you'll want to start with step 2.
https://secure.dslreports.com/faq/15984 -
I am trying to create an Apple ID by using the Itunes icon on my iphone 5s for the first time. It opens up a screen with the 54 pages of Terms and Conditions and it does not allow me to even accept the Terms and Conditions... no Accept option or place to click!
The only option is to Send the terms and conditions via email... which also does not work...it keeps asking me to "try again"... Has someone else had this problem?Hello, Wyseup.
Thank you for visiting Apple Support Communities.
Most likely this email address has been attempted to be setup as an Apple ID at some point. You can reset your Apple ID password via the steps in the first article below. If you do not have access to the email account, need assistance or are not receiving the password reset link, see the second article.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
I updated my iPhone 5 to ios7 and are now experiencing problems. I cannot set up iMessage because when trying to connect to my account it says that it cannot connect to the network. Also, for apps like mail, whatsapp, facebook etc, i can't set up notifications because it always says that I have to connect to iTunes, which I already am.
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). -
However during the process of adding new songs itunes crashed and i had to end task therefor not getting the chance to sync the new songs onto ipod nano. later when i plugged in my current ipod touch all my songs have disappeared and i cant find the original itunes library i had for it! is there anyway to get it back? i have tried pressing shift when opening itunes but still cant find the original itunes that i had!!
Since all of your music came from your computer in the first place, then it should still be there and should be included in your backup copy of your computer.
" it told me when i pluged hers in 2 ipods could not use the same account"
This is not true. You have misunderstood.
You can sync as many ipods/iphones/ipads as you like to one one library. -
create a new account, it tells me that I already have an account and it won't let me create a new account, how do i cancel that old itunes account and create a new one with my new apple e-mail address?
Also when I select on my ipad free apps, it pops up with the previous owner apple id on it, how can I change that to my apple id?From the information that you have provided, it sounds like your Apple ID has been disabled. You can read this to see how you can troubleshoot that issue.
Apple ID is Disabled - Apple Club - Google Sites
You can try signing out of your ID on the iPad and sign in with his ID and see if that works.
Settings>iTunes and App Stores>Apple ID. Tap your ID and sign out. Then sign in with your husband's newly created ID.
Maybe you are looking for
-
SCCM 2012 R2 MDT 2013 Install Features after OS Install
I have a question in regards to installing Features on Windows Servers Post OS Install/OSD. I have MDT 2013 integrated with SCCM 2012 R2. I have created a MDT TS doing the following: Microsoft Deployment Custom Task Sequence (All other ones were for
-
Imovie9, 13"macbook aluminum and USB external drive
I know firewire is better, but is it totally impossible to use USB. Others have said its ok. Tom Wolsky on the FCE forum said that many people are returning the macbooks without firewire. I did a search on other discussions and some say its ok, while
-
Apex 3.2 I have an updateable report that requires one of the columns to have a pop up calendar, displaying date and time. My sql for the column is currently APEX_ITEM.DATE_POPUP(7,null,a.export_time,'dd.mm.yyyy hh:mi:ss') I have also tried APEX_ITEM
-
Just got my HD fixed by apple... And FCE crashes?!
This has never happened before, so I'm not sure why. My macook's hard drive was going to crash, so apple replaced it and transferred all my data over to the new hard drive. But now I'm using it, and something happened. I'd import a few clips into the
-
Hi all, I am a first time poster, long time Flash user, who is trying to wrap his head around AS3. When writing functions, I am unclear on on the part that goes inside the parentheses. For instance, I have see some functions that say: function XXXXX