Trying to set up Time Capsule for WiFi access with Linksys router

Problem: I must use a Linksys router to connect to internet, since I have my telephone connected to this router (Vonage). I have set up a Time Capsule and connected it to the Linksys router, which is NOT wireless. I would like to use the wireless capability of the Time Capsule to provide wifi connection for laptop computers. The Time Capsule's wireless network is visible to these computers, but they do not connect to the network, since the Time Capsule is not the source of dynamic IP addresses; rather, the Linksys router is the source for IP addresses on my network. What must I do to get IP addresses supplied to computers attached via wifi?

The Time Capsule was set up using bridge mode. My initial error was to use the WAN port. After switching to a LAN port to connect with the Linksys router, the laptop computer was able to connect to the network wirelessly, but it could not obtain web page from the internet.
The laptop is a Dell Inspiron 6000; with an ethernet cable attached to the Time Capsule, it receives an IP address AND it can obtain web pages from the internet. The command "ipconfig /all" issued at the DOS prompt yields approximately the following:
Broadcom... (this is the ethernet card) ... IP address 192.168.15.104, with the gateway 192.168.15.1 (which is the Linksys router)
Intel(R) PRO/Wireless... (this is the wireless card) ... IP address 192.168.15.103, with the same gateway.
I can ping the iMac from the Dell laptop; the iMac is connected directly to the Linksys router. Running ping 192.168.15.104 from Terminal on the iMac succeeds, while ping 192.168.15.103 does not.

Similar Messages

Setting Up Time Capsule for External Access

Hello all,
I am trying to set up my Time Capsule to be accessed without local Wi-Fi. I can use Back to My Mac to access the Time Capsule from my iMac, but not from my iPhone as Back to My Mac isn't intergrated into iOS. I use File Browser on my iPhone to access my TC from LAN, and it seems likely the TC can also be accessed through 4G using File Browser, too.
My first question is, can the Time Capsule be accessed through the internet (by port forwarding or something)?
Second question if the first is possible, how do I do so? (step by step instructions please)
I have the latest model of Time Capsule and AirPort Utility.
Thanks!
- Noah

Filebrowser can be used to remotely access the TC.
There are instructions in the filebrowser website.. have you tried those?
http://www.stratospherix.com/support/gsw_timecapsule.php?page=6remote
The one area where I think you might have issues is global domain name.. as that has been problematic.
You really need a static public IP from your ISP for this to be successful.
See Tesserax doco on remote access especially the global domain instructions.
https://discussions.apple.com/docs/DOC-3413
There is a hugely better method BTW..
Buy a vpn router and substitute that for the Time Capsule.. which can then be bridged behind the router.
VPN client is built into iOS and every mainline OS available. It is robust and has far superior security.
Note carefully the method you are going to use with iphone is opening your TC to attack. They have hidden the SMB port, but in reality.. any hacker will one day do a port scan on you and find it open.. no matter what port it is translated to.. at that point your password will be the only thing stopping access to outsider.. and they can often get around that.. or mount Man in the Middle type attack, since passwords in SMB are not secure.
Not that I think a hacker is going to waste their time doing it.. but it is just so you know.. it is fundamentally wrong.

MacBook Pro won't automatically connect to my Time Capsule for WiFi

My 2012 MacBook Pro (non-retina) won't automatically connect to my Time Capsule for WiFi. I had issues with my Comcast router before, and i reset my time capusle a few times, is that th reason why now everytime i wake my macbook up it dosent automtically connect?

Yes.. wireless after sleep or reboot is a problem. See the info from Tesserax.
https://discussions.apple.com/community/wireless/airport?view=documents
Unable to connect after sleep .. you will see it in the list.

Can I use my Time Capsule for wifi parental control?

Can I use my Time Capsule for WiFi parental control. The objective first is to use a time clock to control internet access (completely on or off). Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control? Anyone out there have any tips on making this work? We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi. Any information including other alternatives would be most appreciated. Surely we are not the only parents on the planet with this issue. Thanks very much!

how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
What wireless devices are we looking at here?
Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
Look for Wireless Clients and click on the numerical IP address that is displayed
Another box will open
Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
Write that down and note that it is your Mac.
Now, connect another wireless device and repeat the sequence. Click on the "other" listing that you see to find out more info about that device. Write down the ID or Address and note what device it is. Then power it off.
Do the same for each wireless device that you want to have limited access.
Post back when you have all the info.

Set up time capsule as wireless access point

I am trying to set up my old apple time capsule as a wireless access point for my girlfriend. She is at college and the university does not permit routers, so I am trying to set the time capsule up so that is just takes the hardwired internet and allows wireless access to the internet so she can use her iPad and MacBook Air on the wireless instead of having to use a gigabit adapter to use the ethernet. The time capsule has the newest firmware and she is running mavericks which has the newest airport utility software. However I am not sure what settings to use to make this work. I am fairly intelligent when it comes to computers however I am not very skilled in networking. If anyone can help I would greatly appreciate it.
Thank you in advance!

How old is the Time Capsule? Running what firmware?
You have a problem.. If you cannot use the TC in router mode, then you are going to have to use it in bridge.. and it then depends on if the Uni system will hand out mulitple IP addresses. .which I doubt. In the end you might be stuck.. and it is not possible really with any system..
Bridge normally requires that the TC take an IP address and then clients connecting to the TC wireless will also get IP addresses.. but if the uni system only hands out one address then the TC has already captured it and there are no more available.. but try that method first.. as it is the easiest.
If it fails there is a more complicated method.. where we can give the TC a separate static IP in a different IP range and the wireless will still be bridged.. so the MBA or the ipad can use the wireless.. but only one can ever be online at a time.
The only way around this is to use the TC as a router contra the rules in the uni.. although I would suggest the uni only cares if you break their system. Most people don't.. but I am unsure what happens if you do.
Ask their IT people how to use a wireless only device like ipad, when they only provide ethernet. You might find there already is a wireless internet system as well.

Setting up Time Capsule for backup only on existing wireless network

I have a wireless network already set up with a NetGear wireless router. Cable plugs into router, router connected via ethernet cable to my Power Mac G5 desktop, plus 2 PC laptops in the house also connect wirelessly to the home network via this router.
I want to set up Time Capsule as an external hard drive to back up all three computers -- I don't necessarily need to use it as a wireless router although i'm not opposed to that if it's easier to do it that way.
When i try to set it up using AirPort utility, i get the amber flashing light. Airport utility is able to discover the device, and then always asks if it's OK to switch networks. I've tried both "switch" and "don't switch"; either way when i try to set it up, AirPort utility stalls out on "Reading Time Capsule Configuration"; eventually giving me the error msg: "Base Station Error: AirPort Utility was unable to find your Apple wireless device."
All i want to do is mount it as an external hard drive so i can use Time Machine for backup, and be able to use it to also back up the PC laptops wirelessly. I need help in the following three areas:
1. How should I be physically connecting my devices if i want to do this? Which cables go in which ports? There is only one ethernet port on the back of my G5. The G5 can connect to the router either wirelessly OR via ethernet cable. I've tried G5-->Time Capsule-->Router, G5-->Router-->Time Capsule, Router-->G5 PLUS Router-->Time Capsule, and I've tried every variation on the regular ethernet and WAN ports. What's the right way to do this.
2. If i'm not setting up the TC as a Wireless Router, is AirPort utility even the right tool for setting it up? it seems to be confused by the two wireless networks and won't let me get past that point. Am I supposed to click "Switch" when it asks me to switch networks? Is there a way to just mount it as an external drive and bypass the AirPort utility setup entirely?
3. Once i get it set up so it's visible as an external drive and usable for Time Machine backup, how do i then make it available to the other PCs on the network so they can back up to it also?
Thanks for your help.

sarah,
You already have an existing wireless network.
You do not need to plug the Time Capsule into anything except power.
Set the Time Capsule to "Join an existing wireless network"...
That is all you need to do.
Then all the computers should see the Time Capsule.
If you can't see "Join an existing wireless network" in the choices, hold down on the option key and then click on the choices.
Give that a try.

Configure Time Capsule for remote access

I have a second generation 2TB Time Capsule, operating on Bridge Mode, connected to an Arris Touchstone Telephony Gateway TG862. I want to configure Back to My Mac to be able to access the Time Capsule remotely.
I've followed the basic steps and get this message from the settings in the iCloud Pane in System Preferences: Setup router for better performance. And this details: Contact your ISP for a different server address.
I've tried Google and OpenDNS, and also disabling the Firewall in the Arris router, and still can't access the Time Capsule remotely.
I also tried disabling NAT and seeing it up as Bridged in the router, and disabling Wireless as well, trying to configure the Time Capsule to serve NAT and DHCP to no avail.
Any steps I'm missing or a whole different approach I should take to be able to access my Time Capsule remotely?
Thank you in advance for any help.

You will have to learn how to port forward in your Arris Gateway..
Arris Touchstone Telephony Gateway TG862
The easiest way is to simply google it.
http://forums.comcast.com/t5/Home-Networking-Router-WiFi/Port-forwarding-in-Arri s-TG852G-CT/td-p/954929
It certainly appears to be problematic.. which is not surprising... If you really need remote access I would request a pure modem from your ISP (Comcast??) or simply replace it with one in the list. You will need to turn off any inbuilt firewall in the router and use DMZ perhaps to the TC.
There is a few posts on youtube which also might help you. eg
https://www.youtube.com/watch?v=_8tKBHvCz_0
But I am on ADSL so my setup is too unlike yours to really tell you much.
If you want to test something.. let me recommend you load Teamviewer onto a computer in your LAN.. set the computer up to never sleep and then try and reach it using Teamviewer from WAN connection.. if that works.. let me recommend you stick to something of this type. Unless you are prepared to change modems with your ISP I doubt you will solve it.
If teamviewer fails nothing is going to work.. you need to at least turn off the firewalls in both the computer and the router..
If you don't want to leave a computer running 24/7 to accept incoming requests.. then use WD MyCloud or similar type NAS.. which are far better designed for remote access than Apple routers.. or use a cloud storage and keep files you might want there.

Adding Time Capsule (for Multicast DNS) to existing router

I have recently moved into a place where I am sharing internet with others (family).
My macs can see their PC's. My macs cannot see my macs.
Wireless Macbook Pro
Hard wired Mac Pro into Netgear router.
I am pretty sure it's because their router, (Netgear, has regular and 5g band) does not have multicast DNS capability, which I understand is necessary for macs to see each other on the network.
I have an older Time Capsule (the one with one band, and no guest login network) that works just fine when it's configured to be the only router on the network. It's worked for years at my previous place using DHCP thorugh a DSL modem.
Question: How do I add the Time Capsule to this network to get Multicast DNS capabilities? OR... is there a different way of getting my macs to talk to each other and still have the internet work?
My relative is a gamer and very particular with his electronics and I don't want to 'remove' the Netgear router from the equation, but I do want my macs to sync up. I run sync jobs to keep certain folders up to date in two places. (No, I don't want to use a cloud for some of this stuff). I have limited experience configuring networks -- I tried plugging in the time capsule into an ethernet port on the netgear router, but I must have configured it wrong because there were conflicting IP addresses and the internet became unusable.
Thanks in advance.

The TC should work ok in bridge mode.
Just go into the airport utility and ensure your TC is bridged.
All routing should be happening on the Netgear.
The printers should then be accessible to the computers.. BUT the TC seems to hate new setups.. I strongly recommend you simply factory reset it and redo the setup.
Use SMB type names.. that means short, no spaces and pure alphanumeric.
And sometimes if you want to print the client will have to connect to the TC and not the Netgear. Mavericks in particular seems to have real issues working with a TC that it is not immediately connected to.
I run somewhat similar setup and right now my airport utility utilty shows the entire history of my network fiddling.. i will have to figure out how to reset airport utility.
As you can see nothing is available because I am plugged into the main router.. my equivalent of your Netgear.
Now I turn on wireless and connect that directly to the TC, lo and behold, the world comes to life.
That is because the new airport utility totally depends on wireless. It is absolutely useless if you use ethernet.
Also remember to check the computer has ipv6 set to link-local.
Apple have made this essential part of the airport network.. you should do this for both wireless and ethernet in the computer. And check that it is set correctly in the TC.
So for example here is what wireless in the computer looks like.
And in the TC. It is in the internet tab under the internet options.

I am setting up time capsule and have issues with DNS

Can't get internet connected and says DNS server not identified

Technicolor TG789vn is a gateway, which is a modem and router in one package. Please verify by checking the Technicolor information on this model below:
http:///en/solutions-services/connected-home/modems-gateways/xdsl-modems-gateway s/tg789vn-bonded
Assuming that things are working correctly, AirPort Utility should be able to set up the Time Capsule correctly with this type of device.
Shut down your Mac and then restart the device.
Power off the Technicolor gateway, wait a minute, then power it back up and let it run a few minutes.
Power up the Time Capsule for a few minutes, then hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light status.
Connect an Ethernet cable....that you have tested to make sure that it is working....from one of the LAN <--> ports on the Technicolor gateway to the WAN "O" port on the Time Capsule
On your Mac....open Macintosh HD > Applications > Utilities > AIrPort Utility
Click on Other WiFi Devices
Click on Time Capsule
The setup utility will open up with a configuration window mentioning that the Time Capsule will be set up to create a network
For Network Name......Enter a simple, short name that you want to call your wireless network.
For Base Station.......Enter a simple, short name that you want to call the Time Capsule. Mine is TC, for example
For Password.........Enter a password that will be used for the wireless network and base station
For Verify Password.....Enter the same password to confirm
Click Next
The utility will set up everything for you. When you see the message of Setup Complete, click Done and you should have a green light on the Time Capsule.
Select the wireless network that you created and enter the password to connect. You should be all set.

Can I hook up a windows computer to my airport time capsule for internet access?

We have hooked up our time capsule for the first time today. It works wonderful on our apple products BUT can I connect a windows based computer to it for internet access?

Yes. Both Ethernet and 802.11 are cross-platform.
(109122)

Set up 2 tb new time capsule for wifi with apple tv. etc. and wireless backup without any internet....

My title says it all, I have the 2 tb time capsule with no internet at this time. Goal is to create a wifi to be able to use my MAC (OS 10.86) with my wireless printer, apple tv, and to back up data and use time machine all wirelessly. Please take me through the steps needed to make this happen.....

How do you get internet??
I understand that the TC is not going to be part of that but it still matters how you get internet.
The setup is basically very simple.. The TC still needs to be in router mode.. ie on the network tab it should say dhcp and nat. You will get several errors .. ignore them.. that is because there is no WAN connection.
That is all that is needed.. You can then connect everything via wireless and it will create a network where each device has connectivity to the others.. just no internet.

I can use my time capsule for wifi, but can't connect for backup

I have been using my TC for a couple of years now, always as a router and backup disk. I went on a long trip then came back and tried to connect to it, I can use the wifi, but I can't connect to the disk to see it or use it for backups. I also have a PC connected to the TC and I can see the contents on there through explorer.
Any ideas would be appreciated...

how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
What wireless devices are we looking at here?
Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
Look for Wireless Clients and click on the numerical IP address that is displayed
Another box will open
Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
Write that down and note that it is your Mac.
Now, connect another wireless device and repeat the sequence. Click on the "other" listing that you see to find out more info about that device. Write down the ID or Address and note what device it is. Then power it off.
Do the same for each wireless device that you want to have limited access.
Post back when you have all the info.

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

Trying to set up time capsule with airport exteme. Apple advises to use manuel setup and click on Advanced. Then enter mobileme ID. I did this but Time Machine doesn't display anything on the capsule window.

Can't set up my time capsule on Airport Extreme (updated). Apple instructions are to use manual set up. Click on Advanced tab. Click on Mobileme and enter Mobileme ID and password. I did this. But Time Machine window is blank. Tryed to click on update window after entering Mobileme ID but Airport does not respond (turn of then on)

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

Trying to set up Time capsule..."OS status error -50" error received

Hi,
I was trying to set uip my time capsule recently but it would not work, my wireless hard drive is set up for windows PC and also configured for my Macbook thru the Buffalo software, but when setting it up on my mac it will not complete the procedure and I receive this error message "OS status error -50", can anyone help me?
Cheers
Paul

+but once formatted, could I partition it, and have a half for the time machine? and put the rest on the other half?+
If you are talking about an external drive attached directly to your computer, yes, that should work fine. The general rule of thumb for Time Machine backups is that you will want to reserve at least 2 times the amount of space that your current Mac is using now to allow for a good "history" of future incremental backups.
So, if the HD on your Mac is using 200 GB, then you would want to reserve at least 400-500 GB of space for Time Machine backups, and more if you can.
It's not possible to partition the Time Capsule disk unless you physically remove it and place it in a separate enclosure. I would not advise this, as for starters, this would void the warranty. It is possible to create a "disk image" on the Time Capsule disk that will in effect accomplish the same task as a partition. Post back if you need more info on this.
Message was edited by: Bob Timmons
Message was edited by: Bob Timmons

Trying to set up Time Capsule for WiFi access with Linksys router

Similar Messages

Maybe you are looking for