Trying to set up Time Capsule to MacBook Air but it only recognises the ethernet LAN connection and not the WAN Any ideas?
If I put the ethernet cable in the WAN port of the capsule my book doesn't pick it up but when I put it in the LAN one it does. Then it tells me it needs the WAN connection I tried rebooting in various ways including modem but I can't get past 2 problems i.e. Problem1 - Double NAT so I click the Bridge Mode and then it asks me to place the cable in the WAN port. As soon as I do it loses it. The light is flashing amber so its clearly a connection problem. Any ideas anyone?
The WAN port is for the ethernet cable that is coming straight from your modem/router.
Plug your computer into any of the Lan ports.
Once you're configured (and in bridge mode) it won't matter after that, but leave those details for later.
Similar Messages
-
I received this error message when trying to use my time capsule. Macbook Air.sparsebundle already is use. What does this mean?
First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
If not, see > http://pondini.org/TM/C12.html -
I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you
As posted about a dozen times every day, try the offline installer from http://get.adobe.com/reader/enterprise/
-
I Just purchased a used MacBook Air but it has no OS, how can I re-load the OS?
I Just purchased a used MacBook Air but it has no OS, how can I re-load the OS?
It depends on which operating system was on it when it was released. Older MBAs need disks or a special thumb drive to boot for OS recovery.
Let’s assume it is new enough that it has a recovery partition built in. You can try this and see if it works and if it doesn’t work then it is old enough to need he aforementioned recovery media.
It is simple. First you format the system disk and then you install OS X.
You will need to be in an area with a good wireless Internet signal.
Boot in Recovery Mode:
Power it on and when you hear the bong hold down the Command and R keys simultaneously.
Format the system disk:
> Disk Utility
> Select your system drive.
> Partition
> Partition Layout: 1 Partiton
> Options...
> GUID Partition Table
> OK
> Name: Macintosh HD
> Format: Mac OS Extended (journaled)
> Apply
> Disk Utility > Quit Disk Utility
Install OS X:
> Click on Install OS X and follow the instructions. -
When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?
Find and run the Disk Utility program. In the list on the left side of the program window you should see two hard drives - the internal Mac drive and one labeled with Western Digital's name. (Not exactly sure how the WD drives appear.) Under each of those drives there will be another indented drive name. See picture below.
If you don't see two drives there's your problem - for some reason the Mac doesn't recognize that there's an external drive plugged in. Check cables, etc.
More than likely though you will see the two drives. See how in the picture I've selected the indented drive icon? Do the same for your WD drive. Now look at the bottom where it says Format. To use TimeMachine your format needs to be Mac OS Extended (journaled) and I'm betting it doesn't. After you've done that TM will be able to use the drive. -
Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's
And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.
-
Can't set up my time capsule on Airport Extreme (updated). Apple instructions are to use manual set up. Click on Advanced tab. Click on Mobileme and enter Mobileme ID and password. I did this. But Time Machine window is blank. Tryed to click on update window after entering Mobileme ID but Airport does not respond (turn of then on)
mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network. -
Trying to set up Time Capsule for WiFi access with Linksys router
Problem: I must use a Linksys router to connect to internet, since I have my telephone connected to this router (Vonage). I have set up a Time Capsule and connected it to the Linksys router, which is NOT wireless. I would like to use the wireless capability of the Time Capsule to provide wifi connection for laptop computers. The Time Capsule's wireless network is visible to these computers, but they do not connect to the network, since the Time Capsule is not the source of dynamic IP addresses; rather, the Linksys router is the source for IP addresses on my network. What must I do to get IP addresses supplied to computers attached via wifi?
The Time Capsule was set up using bridge mode. My initial error was to use the WAN port. After switching to a LAN port to connect with the Linksys router, the laptop computer was able to connect to the network wirelessly, but it could not obtain web page from the internet.
The laptop is a Dell Inspiron 6000; with an ethernet cable attached to the Time Capsule, it receives an IP address AND it can obtain web pages from the internet. The command "ipconfig /all" issued at the DOS prompt yields approximately the following:
Broadcom... (this is the ethernet card) ... IP address 192.168.15.104, with the gateway 192.168.15.1 (which is the Linksys router)
Intel(R) PRO/Wireless... (this is the wireless card) ... IP address 192.168.15.103, with the same gateway.
I can ping the iMac from the Dell laptop; the iMac is connected directly to the Linksys router. Running ping 192.168.15.104 from Terminal on the iMac succeeds, while ping 192.168.15.103 does not. -
Trying to download new iTunes software to my MacBook Air, but when I try to restart, the laptop freezes. Any advice?
jessicar
Just user to user....based on past and current history, Adobe Tech Support is not going to help you with a technical issue which is preventing you from using your purchased serial number for Photoshop Elements. Version 12 is not the current version. And, the Adobe Tech Support is limited even for the current version which is 13. If this matter involves a purchased activated serial number trapped on a crashed computer while you are trying to install on a 3rd computer, then probably Adobe Chat Activation can be of assistance. If that is the case and you want to explore that possibility, then click on the following link
Contact Customer Care
Photoshop Elements
Adobe ID, Signing In
Adobe ID, Sign In, Account Help
Chat Panel
If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Are you getting one of those "too many computers with your serial number" messages? Then the above should apply to your situation.
Before the above consider....
a. For Photoshop Elements technical issues please post your question in the Adobe Photoshop Elements Forum. Somehow your
question got posted in the Adobe Premiere Elements Forum.
b. Have you verified your Photoshop Elements serial number at the Adobe web site (http://www.adobe.com) - after signing in with your
Adobe ID and Password, type My Products in the Search field and follow the path to your product in My Products. Click on Adobe
Photoshop Elements 12 in your list to reveal the serial number.
c. Do the install with antivirus and firewall(s) disabled.
ATR -
I was trying to send a video via iMessage over wifi, but was only allowed to send a fraction of the video due to the size limit. Does anyone know what exactly the limit is? Thanks!!
You said: "I've never tried the restore function in disk utility. Would that be the same as cloning the drive?
YES! See the my old instructions below. What you might try after step 5 is to restart you MBP holding down the Option key. Select the new HDD icon and see if it boots. This way you will know that the new HDD is operable.
Ciao.
INSTALLING A NEW HDD IN A MB
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have. -
Trying to set up Time capsule..."OS status error -50" error received
Hi,
I was trying to set uip my time capsule recently but it would not work, my wireless hard drive is set up for windows PC and also configured for my Macbook thru the Buffalo software, but when setting it up on my mac it will not complete the procedure and I receive this error message "OS status error -50", can anyone help me?
Cheers
Paul+but once formatted, could I partition it, and have a half for the time machine? and put the rest on the other half?+
If you are talking about an external drive attached directly to your computer, yes, that should work fine. The general rule of thumb for Time Machine backups is that you will want to reserve at least 2 times the amount of space that your current Mac is using now to allow for a good "history" of future incremental backups.
So, if the HD on your Mac is using 200 GB, then you would want to reserve at least 400-500 GB of space for Time Machine backups, and more if you can.
It's not possible to partition the Time Capsule disk unless you physically remove it and place it in a separate enclosure. I would not advise this, as for starters, this would void the warranty. It is possible to create a "disk image" on the Time Capsule disk that will in effect accomplish the same task as a partition. Post back if you need more info on this.
Message was edited by: Bob Timmons
Message was edited by: Bob Timmons -
Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglennWhen having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+. -
I set up a new time capsule on a wireless 4g modem. I started the initial backup. It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)." Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
Thanks,
DavidBunce wrote:
oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
suggestions before I either get this looked at or scrap the HD on it and move forward.?
Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983 -
IMac Time Capsule OK, Macbook Air Time Capsule Very Slow, both 10.9.5
I am struggling for more than a week trying to find an answer, but failed, hope someone can help me out
It seems after I upgraded to 10.9.5, a message on my Macbook appeared that I believe advised me to do a new full back-up on my Time Capsule. I did, it was slow, few MB after 1 hour or so, so I cancelled it. Whatever I tried, it remains a problem, I am now backing up 180GB to a 2TB Time Capsule, and it is at 53GB after 10 hours, now running at about 1GB/3 hours. My iMac, also on 10.9.5, connected to the very same Time Capsule on the same network runs smoothly, backing up 850GB in 8 hours or so.
What I have done so far, that did not help:
- Reformatted my Time Capsule completely,
- Run Disk Utility on Macbook, Repair Disk permission, Repair Disk.
- After Repair Disk Permissions it completes OK, but when I immediately run it again if finds the same problems, which it says have been corrected, see screenshot
- Disconnected my iMac from the network, sticked the very same network cable in my MacBook, ran Time Machine again, no difference
My set up:
1x Macbook Air, mid 2002, 250GB of which 70GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x iMac, beginning 2009, 1TB of which 150GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x Time Capsule 2TB, running latest firmware 7.6.4
All networked to the same network, no wireless connections
Prior to 10.9.5 I did not have this problem. I am pretty much lost. Anybody?USB to ethernet has never been great.. although why it is worse with 10.9.5 is typical quality of apple upgrades these days.
7GB/hr sure aint fast.. it will go fairly slowly over the small files but should speed up on the larger ones.
I would take another step.. since you have come this far..
Check your wireless link speed. Depending on the age of the TC (yours in gen4) and the air.. you link speed should show 450mbps in the wifi on the mac.
Check it now..
Transmit rate should show 450.. you might need to setup close to the TC to get it.
But I achieve that by setting different names for the two bands.. TC24ghz and TC5ghz.
By default my mac will choose 2.4ghz .. because it is based on the best signal not the best speed. On 2.4ghz it can achieve 217Mbps max. Usually it will drop to 130. So by using a different name I can force the connection to the highest speed.
As you can probably tell.. IMHO using auto for everything is a great way to get things to work.. but how well they work is optimised by a committee.
Setting all the factors myself I set what I want and produce a racehorse instead of a camel.
(It is a typical joke.. camel is a horse designed by a committee!!). -
I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was. I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes. I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list. What am I doing wrong. I know I should have left it alone and never attempted something I know nothing about~ Thanks
I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was. I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes. I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list. What am I doing wrong. I know I should have left it alone and never attempted something I know nothing about~ Thanks
Maybe you are looking for
-
HOW WE FIND OUT OPEN PURCHASE ORDER AND CLOSED PURCHASE IN THE TABLE?
HI, PLZZ HELP ME. what are fields names for open purchase order and closed purchase order thanks
-
Adobe Flash support is not included in BlackBerry 10 OS version 10.3.1 Browser
Adobe Flash support is not included in BlackBerry 10 OS version 10.3.1 Browser Blackberry 10 OS has been on the market for the past two years, and we continue to have the highest mobile HTML5 test score . We understand how important web browsing i
-
Additional field in standard MSS iView
Hello all, We have created a new custom infotype (IT9915) in which we intend to hold some disability information. We would like to display one of this infotypes fields within MSS in the 'Employee Profile' page, 'General Data' iView. I have little JSP
-
[svn] 3668: Fix for SDK-15941: selectedItem/ selectedIndex does not render as selected.
Revision: 3668 Author: [email protected] Date: 2008-10-15 15:25:04 -0700 (Wed, 15 Oct 2008) Log Message: Fix for SDK-15941: selectedItem/selectedIndex does not render as selected. Reviewer: Deepa Ticket Links: http://bugs.adobe.com/jira/browse/SDK-15
-
Hi i forgot my firmware password, need help urgent
I suddenly got blue screen when I restarted my macbook tried to boot from other drive ;nothing start up with option key nothing i forgot my password I have MACBOOK LATE 2009 WHITE HELP PLEASE THX