Trying to setup a Belkin N750 between Mac & Win 7 to share Itunes Library on an external HDD
Hello all,
Please excuse my complicated question. I really cannot fathom out how to resolve this technological nightmare. I have a 50gb Itunes Library stored on an External HDD in MAC format (HFS+) I want to share this library with the Windows 7 Laptop, i have enable home sharing on both computers. Sadly the Windows laptop cannot see the itunes library.
I have a Belkin N750 wireless router which has a USB port and LAN connections on the back. I bought this on the understanding i could plug my HDD into the router and it could then be accessed by both Mac and P.C. Annoyingly the HDD cannot be seen by either laptop! I am assuming this is because of the file format??
Does anyone know of any way i can share my HDD to both Mac and P.C so the Itunes library can be shared and playlists can be made by each user?
Thanks in advance
Any ideas are welcome as it would stop me throwing the whole lot into the garden and going back to Vinyl and tape decks!
Ian
P.S: I also have access to my music library via iCloud, i have logged into iCloud on the windows laptop and the Itunes library can be seen but cannot be edited (Playlists added or deleted)
P.P.S: HDD has just died so i have the oppurtunity to buy a new HDD so can format it before adding Itunes Library back to the drive. (Just had to pay to get data back off dead HDD which will come back on DVD's so the assumption is to copy data onto new drive)
Again, thank you for reading and i hope someone has any bright ideas to help me.
Hello,
The iTunes library is installed and added to my Mac with no issues. I just want to share the whole library with a Windows laptop.
As mentioned the 'Enable home sharing' does not seem to work. I am assuming it is the file format of the HDD which means the home sharing cannot be done on a Mac?
Thanks
Ian
Similar Messages
-
Can I store the apps in my iTunes library on an external hdd but keep my music on my mac
can I store the apps in my iTunes library on an external hdd but keep my music on my mac?
thanksI don't know if this is me adding files to iTunes when the external wasn't connected
it is.
is it OK to just keep deleting that library on the Air?
i wouldn't - at least not until i
mount the external
point iTunes media folder location back to the external via preferences > advanced
consolidate my library via file > library > organize library
The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive. -
Using ONE iTunes library on an external HDD with TWO Separate Macs
I have been battling for some time to run one iTunes library on my 160GB Passport between both my 12" iBook G4 and my 15" Macbook Pro.
While I understand the concept of using the SHIFT-key when booting iTunes to Choose the Library it does not appear to work the way I imagine it should.
The Library is managed on the Macbook Pro and merely used on the iBook.
Updates done on the Macbook Pro do not carry across without doing a full consolidation with the Library.
Please Help.*While I understand the concept of using the SHIFT-key when booting iTunes to Choose the Library it does not appear to work the way I imagine it should.*
On a Mac you hold down the Option key:
How to open an alternate iTunes Library file
iLounge - Managing your iTunes Library on an External Hard Drive -
How to share iTunes library between two users on the same Mac
We have recently bought a Macbook Pro and have successfully transferred the old PC information onto the Mac. But, the iTunes library from the PC has now just gone into the old user acct. I am now confused as to which iTunes user name I connect my devices? Is there a way to merge these two iTunes through the user accts?
Thanks,
I feel like I learning about computers all over again!It's doable. As it's been pointed out Aperture has no provisions for file locking so you can't have two users accessing the library at the same time. This includes having one user having the library open only for browsing. Aperture doesn't have a +Read Only+ mode, when it opens the library, even if you make no changes to any images, the library will be written to.
This also means you can't have one user open the library and then stop using Aperture but still have the library open and then have another copy of Aperture open on the library.
Of course if you have two copies of Aperture running even they are on different libraries you'll be in violation of the license and you'll have bigger problems to worry about then a toasted library. -
Unable to share iTunes library between multiple users on one Mac
I've got an iMac (running Snow Leopard) and I'm trying to share a single iTunes library among three users (Admin, and two others), but I simply cannot get it to work. I have followed the instructions in this Apple KB article "to a tee", checked and doublechecked permissions (read/write for everyone) on the iTunes Music folder (moved to /Users/Shared), and it just won't take. The original library owner (Admin) can still access all music as normal, but no other user can. I've tried deleting everything from each users' ~/Music/iTunes folder and the iTunes plists, so I could start each user fresh, but NOTHING has worked. iTunes for the other users simply does not recognize any media. Like I said, I've followed all of the instructions in the KB article linked above.
Since that seems to be the "official" method that every other thread on this subject references, I'm looking for some troubleshooting tips to help me discover what exactly is wrong here.
Thanks in advance!Chris, thanks for the reply. Are you telling me that I should move the iTunes folder itself, and not merely the iTunes Media folder, as instructed by the KB article? At this point, I'd be willing to try just about anything, but the KB article specifically states:
Important: Do not move the iTunes folder, the iTunes Library file or the iTunes Library.xml file.
As I stated above, I did exactly what the KB article said to, which is to move the iTunes Media folder (called iTunes Music on my iMac, since the library has been around since pre-iTunes 8 or so) to /Users/Shared, and then go into iTunes Prefs for each user, and under the advanced tab, choose the location of the library for each user. I know that this method does NOT share iTunes library (.itl or .xml, or the other associated files), and doing what you suggest would, but I'm curious if that would cause any problems.
And yes, like I said in the OP, I did check/change all file permissions on that folder appropriately.
Thanks again for the help! Please let me know if I'm reading your suggestion right! -
Share iTunes Library between Leopard & Tiger?
I have 2 internal HDs in my Quad G5. One boots Tiger, the other boots Leopard. Because of its very large size, I moved my iTunes music (and videos) from Tiger to an external HD, following the standard procedure for moving ones library. All works fine in Tiger.
However, because Leopard will allow me to use the new Front Row (I have a G5 Quad), I would like to access my music and movies when I boot into Leopard. In Leopard's iTunes Preferences, I have tried changing the iTunes Music Folder Location to the external hard drive, but Front Row continues to show the original iTunes contents (the one in Leopard's iTunes).
Is what I am trying to do possible, or can't the iTunes Library on an external HD be accessed from two OS's on separate drives in one machine? Thanks.Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
Otherwise the solution is to trash Vista, and install Windows-XP. -
I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive right before my old mac laptop died and then tried to transfer it to my new iMac. Now when I try to play my old music it skips like a scratched cd. Also, now I can't add any music to my iPhone unless it was purchased recently through itunes and downloaded through icloud. I tried to "Organize" my library in hopes of correcting the problem but my iMac just ejects my external harddrive part way through. Please help!
Ejects the harddrive?
Of what did your old Mac die?
It sounds to me like you have some file corruption somewhere. Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting. -
How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format?
I used to store my pictures on an external hard drive using the latest version of Aperture. Now I tried migrating my Aperture library to Photos. However, after a short moment an error message popped up telling me that "Photos was unable to make a copy of your library before preparing it. Photos does not have the necessary permissions...".
My external HDD doesn't need any permission repairs nor is the system prohibited to read from or write to it.
Thanks for any advice in advance!
GohtacMy guess is that the encryption is the problem for the new app.
-
Trying to move iTunes library to new external hard drive
I'm trying to move my iTunes library to a new, second, external hard drive and I'm not having much luck. I have two G-Tech 500 GB external drives. One is my Time Capsule and the other one I plan to use to house my iTunes and iPhoto libraries -- I want to free up space on my internal drive.
The iPhoto library moved over to the new disk with no problems. iTunes, on the other hand, keeps hanging up, with the "beach ball of death" and a lot of file error messages. I began moving my iTunes library onto the external drive by following these steps:
• Open iTunes
• Go to Itunes Preferences
• Click the Advanced Tab
• Note where the Music Library's located under iTunes Media folder location
• Navigate to the folder and drag the library onto the external HD.
The plan was to then go back over to iTunes and input the folder location in the iTunes Preferences so iTunes can find the library again. However, the simple drag-and-drop just isn't working. My iTunes library is about 10,000 songs and videos; if I have to do this album by album (which seems to be working, but I'm still having the occasional hang-up and freeze) it will take weeks! Has anyone had this problem before, and if so, did you find a fix?
Any advice is greatly appreciated! Thanks in advance for taking the time to look -- Tomthe support article Dennis pointed you to would consolidate your media files to the external but keep the iTunes folder on your startup disk.
another approach would be to copy the entire iTunes folder to the external and run your library from there (this assumes that all your media files are currently in <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music).
so, if you're willing, start over yet again. before you proceed, erase the external using disk utility and make sure it is formatted for Mac (make sure the partition map scheme of the drive is GUID and the volume is Mac OS extended (journaled)).
now copy the entire iTunes folder (not just the iTunes music folder) to the external using the finder. when the copying has finished, launch iTunes while holding the option key, click on +choose library+ when prompted, and select the iTunes folder on the external.
once you're satisfied everything worked as expected, you can delete the contents of your local iTunes music folder.
JGG -
I store my itunes library on an external drive shared between 2 computers and itunes on computer A isn't seeing or showing the songs I added using itunes on computer B. How to fix this?
I don't know if this is me adding files to iTunes when the external wasn't connected
it is.
is it OK to just keep deleting that library on the Air?
i wouldn't - at least not until i
mount the external
point iTunes media folder location back to the external via preferences > advanced
consolidate my library via file > library > organize library
The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive. -
tried to move the itune folder to an external hdd, (precisely as written above) but after "consolidating, happens nothing
That's because too many people confuse moving media folder with moving the library properly.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the iTunes Library.itl file in the moved iTunes folder.
For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168 -
Am trying to transfer an iTunes library to an external disk for back up. Have followed normal instructions by locating iTunes folder in Music file and dragging across the iTunes folder to the external disk icon. Nothing happens. No notifications. Just a very pregnant pause. Any advice gratefully appreciated.
Michael L JWelcome to Apple Support Communities
The external drive must be formatted in "Mac OS Extended (Journaled)", exFAT or FAT32, because OS X can't write in NTFS partitions by default.
As you just want the library on the external drive to make a backup of your library, you can format it in "Mac OS Extended (Journaled)" by using Disk Utility > http://pondini.org/OSX/DU1.html (Note that you won't be able to use the external drive with PCs unless you install a special application in them).
Finally, drag your iTunes folder to your external drive -
I'm trying to figure out how to add my music to my iTunes Library..?
I have an iPod Classic, almost full of music... I'm trying to figure out how to add my music to my iTunes Library (so I can then sync with my iPhone). When I try to sync, it gives me an alert: Are you sure you want to sync? All existing content will be removed and replaced with songs from your iTunes Library. How can I add my songs? I don't mind backing my files up and restoring my iPod, but I can't even find how to do that. Please help?! Thanks.
Are you using Mac or Windows?
With Mac you can click file on the top left, on the dropdown box 'Add to Library...'
With Windows you could have the folder with the music in open, and simply drag it into iTunes.
Or simply stick the CD into the computer and let it do it's work
If you want to backup, it should already do it for you, then once your iPod has been restored it lets you choose from the backups that iTunes has created. That's just me though it may not be the case for you. -
Import iTunes library from an external HD to a new Mac
I just got a new macbook and am trying to import my itunes library from my external hard drive. I tried to just select my library on the external HD in the advanced tab, but my list of songs and ratings is not being imported into the software. I selected my xml file and my playlists showed up but not songs
How do I accomplish this?
Thanks,
JasonI just ran into this, too, when my Mac Mini died. I assume you're taking the data (songs) off of your old hard drive? Maybe with an external enclosure wrapped around it? Here's what I did:
1. Open your Mac's main hard disc, where your iTunes resides. (By "open" I mean "double click on.") 2. Open "Users". 3. Open your user name, whatever you sign into the computer with (if you don't know, it's NOT "Shared"). 4. Open the "Music" folder. 5. Open the "iTunes" folder. 6. Scoot this window off to one side of your screen, and go to your old hard disc, where your music is, and repeat steps 1 through 5. 7. Now drag all of the folders you see on your old hard disc's same window over to your new hard disc's open window. They should be: a folder labeled Album Artwork, iTunes Library, another folder labeled iTunes music (that's where your music is!), and iTunes Library.xml. You might also have additional things like "iTunes Music Library (2)" and a folder labeled Previous iTunes Libraries. Drag them over too! IMPORTANT: you'll get a message saying "This folder already contains a newer version..." etc. "...do you want to replace?" Of course you do! - you're filling up a newly formatted disc, right? Say "yes" each time. You'll know you got it right because it'll take a long time for the iTunes Music folder to copy over, since that's where all the data is. When you start up iTunes afterwards, all your settings should be exactly like they were before! Enjoy!
PowerMac G5 1.6 Mac OS X (10.4.10) -
Hi All,
I am currently trying to backup my iTunes library onto an external hard drive so that I can copy it onto my new Macbook Pro. I have been following the steps posted on the Apple website however each time I get a dialogue box stating:
'The operation cannot be completed because you do not have sufficient privileges for some of the items'.
Is this because I have items that were bought under another persons iTunes account? If so, is there a solution to this problem? Or am I doing something completely wrong?
Thanks in advance,
Sbrooks19Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820
Maybe you are looking for
-
BED Rate in Excise Invoice and ARE-3
Hello All, I am having a problem in excise invoice and Creation of ARE-3. The system is calculating the Excise components (BED/ECS/Higher Cess) but when i check the table J_1IEXCDTL, it is displaying the values but not the %age rates. The same proble
-
How to change my iCloud account with only access to the Apple ID
Hello everyone Im using my previous company ipad and i dont have access to the registered iCould account. How to change my icloud account to a new email account that i own. I have access to the Apple ID Account but i dont have access to the iCloud ac
-
I want analyze data,it will return collection of oracle user-defined type. I want to find a efficient solution ! thanks
-
How do I set font default in aperture?
how do I set font default in aperture?
-
Hi, below is my sample code class test int sample[][]=new int[10][10]; int rows=0,k=0; int columns=0; public void meth() rows=9; columns=9; }//end of meth() public meth_2() for (int i=0;i<rows;i++) for(int j=0;j<columns;j++) sample[i][j]=k; k++; for