Trying to setup airport for 1st time and it will not connect to internet, we also did not create a new network and cannot find this option again
Trying to setup airport for 1st time and it will not connect to internet?
You might try doing a reset of your AirPort unit. Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
For more advice, please describe all your networking gear.
Similar Messages
-
trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?
I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location. -
Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.
Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.
-
Previously, the "Check for updates" option is found under the Help menu. In Firefox 4, I cannot find this option; how will we be able to check if there are available updates?
Can this new version update itself automatically? How do I set this option?Why do developers move stuff just to move it?
-
I have been trying to install iTunes several times, I keep receiving the same message when I open it:
iTunes.exe - system error
The program can't start because MSVCR80.dll is missing from your computer.Try reinstalling the program to fix this problem.
You bet I have tried, numerous times, it keeps coming back and iTunes won't start.
Any idea?
Yevass.Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
i am trying to setup an airport express wirelessly. can this be done or do i have to have an ethernet cable pluged into it?
You can set up the Express using AirPort Utility and wireless only, but you must first log on to the default network that the Expess provides.....Apple Network xxxxxx....and then open AirPort Utility.
No password is required.
For most users, the Ethernet cable method is simpler....if you have a spare Ethernet cable handy. -
Hello, my father recently passed (using his ID) and I took over the payments on his mac and took his computer. I am not that familiar with mac, but am usually computer savy. However, this one has me stumped. I have no problem starting the built in cam and it seems to work fine with all other programs I've tried using it with. However, it will not work with yahoo. Whether I use normal yahoo messenger or if I try using Yahoo through I chat. The cam button will not light up, therefore, it is not clickable. Which ultimately means I cannot use my cam on yahoo, which is something I use 99% of the time compared to other programs. So why is this happening and what solutions can I take to try and fix this? The mac I am using is: Mac OS X, Version 10.7.4
Thank you for any and all help, it is much appreciated.Welcome to Apple Discussions!
1) If the iTunes preference window is open when you connect your iPod, the iPod will not be recognized by iTunes.
Also, iPods can work with many iTunes libraries, so that is not the problem here.
Is all the software on your computer up to date?
iTunes
iPod Updater
Updating iPod's Software
Does the iPod show up in My Computer when connected to your computer? Does it say Do Not Disconnect?
Try the steps listed here...
iPod shows up in Windows but not in iTunes
If you are going to use your iPod with multiple iTunes libraries (home and school)...
Using iPod with multiple computers
2) What part aren't you understanding. Here are a couple of free programs you can use to convert videos...
MPEG Streamclip
Videora iPod Converter
The programs should come with documentation and instructions to convert videos.
3) You can go to file-->add file to library, file-->add folder to library, or have iTunes open and drag the files into the iTunes library while viewing the library.. You can also import from CDs.
iTunes needs to be adding the songs to the iPod. You cannot just add the song files to the iPod.
btabz -
In iTunes my iPhone refers me to iTunes on my computer for verification. iTunes won't work on my computer. How can both my iPhone and iPad stand alone?
Turns out that when my iPod Touch was restored, the restrictions had been turned ON for Facebook and several other apps. This is what was preventing the Facebook app from accessing my Camera Roll for picture downloads. This is odd since all of my iPod backups would not have had those settings turned on. This is also the first time this has occurred given the few times I've had to restore my iPod Touch.
Anyway if you experience the same behavior from your iPod or iPhone with iOS 8.0.2, just go to the General settings and review your settings under Restrictions. Once you set them to allow for changes, you should be back in business. -
I am using a 2011 iMac on 10.6.8. I recently downloaded the Yosemite upgrade and during the installation process ran into the "this disk is used for time machine backups". I ejected the external drive I use for time machine backups and turned off time machine in the application. I then followed the instructions of the help article (OS X: Cannot install on a volume used by Time Machine for backups - Apple Support) by moving the folder "Backups.backupdb" that I was able to find on my internal hard drive to the trash. I have restarted several times after completing this process. I am still running into the same error during the installation process. I have searched the hard drive for any other backups and I cannot find any. I searched the hard drive using the command cmd-shift-g and searched for “backups.backupdb” and was unable to find any folders or files. Any other suggestions?
I have resolved the problem - I did not actually delete the "backups.backupdb" folder, I only deleted the contents of the folder. I must have only searched on the user account for the folder after I thought I had deleted it. Thank you for the assistance everyone and I apologize for the inconvenience!
-
Trying to reinstall CS5 for MAC but serial number will not work?
Hello,
I've lost my original installation CD, but I have my serial number. My computer crashed, so I lost everything and I tried downloading the trial version so I could enter my serial number onto it when the trial is over, but it will not accept my serial number?
What can I do?
On my Adobe Profile, it shows the serial number and when it was registered.
Thank you.Hi there,
First, the answer depends on the exact error that you get.
1. If the error is "invalid serial number", then you must be using the wrong installation media or Operating System. This is the main reason.
2. If the error is " serial number is valid however it's previous qualifying serial number is not found ", the serial number you have is an upgrade serial number, which will require it's previous qualifying serial number which you need to have, previous qualifying versions supported are CS4, CS3 and CS2.
For further easy solution, I would suggest you contact adobe customer support.
Thank you. -
I am looking for an app and cannot find it.
Ski School for beginners? I can not find this app. I know you have it.
Try the search field top right corner of the App Store window.
There is a ski school app for iOS devices such as iPads, iPhones, and the iPod touch > http://itunes.apple.com/us/app/ski-school-intermediate/id394636307?mt=8
I can't locate one similar in the App Store for the Mac OS X. Keep in mind an app optimized for iOS based devices cannot run on the Mac OS X and vice versa. -
1st gen mini (1GB) will not restore with new updates installed
hey everyone would appreciate some help on this one cause im stumped.
i plug in my ipod and it says it needs restored on ipod itself and on pc. i will try to restore and it will but once window closes it comes up again. i tried running a diagnostic check on my ipod and everything is green but my connection status. i wouldnt think that i am having a USB problem because it looks like it is charging on the ipod. all software is updated and has been uninstalled and reinstalled several times and itunes seems to work fine.See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
I cannot find anywhere on the Adobe sights the specific page where I can download Photoshop CS6 Camera Raw Update to 8.4 or 8.4 to support Lightroom 5 and my new Sony a7r camera. Please help. I am a tech novice. Thanks.
Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks. -
IMovie crashed and will not create a new project
I was in the middle of working on a project and when I went to add a clip, it said something along the lines that I couldn't put it there and then closed the program. When I was able to open it back up, I tried working on it but it couldn't find the clips, and later on the actual projects. Now, I am unable to even create a new project.
It is actually on a MacBook not on Windows 7
-
I get a message that says cannot connect to iTunes when I try to update apps. I have tried everything. What to do?
Apple appears to be having trouble with the iTunes Store servers right now. Wait for them to fix it.
(81086)
Maybe you are looking for
-
Strange performance issue in bex report
Hello Experts, I have a performance issue on my bex report. I'm running the report with below selection criteria and getting 'too much data' error. Country : equals EMEA Category: not equlas 13 Date : 02/2010 to 12/2010. But when I ran the report fo
-
Restore Pages files after changing Apple ID on iPad
Hello: Anyone know it it's possible to restore the Pages documents that were on the iPad after chaning the Apple ID? When I first confirgured my iPad, I used my Apple ID to set it up; however, in the process of migrating MobileMe to iCloud, my Mobil
-
Want to increase the visible length of an email field (PB0105-USRID_LONG NO
Its showing 18 chars ,ong field although it is field (PB0105-USRID_LONG NO) which is 241 chars long. hw to increase the visible length of this field? Thanx.
-
Urgent Help please ---deploying several times an application
Hi everyone, I am trying to deploy an EJB (TestEJB, remote interface is Test) component into weblogic 6.1. All the files related to TestEJB are in the package com.myApplication.test. In the config.xml, the tag <Application Deployed="true" Name="Test"
-
So last night, I downloaded all my software updates and hit 'restart'. then I went to bed, thinking my updates would install themselves automatically. I woke up this morning only to find that my computer had restarted in Windows 7. How can i make it