Trying to setup PPPoE connection

Hi guys.
I've got a Netcomm NB5 modem/router and WRT610n.
I decided to upgrade the NB5 firware, change admin password, and change the way the NB5 and WRT610n talk to each other.
My current setup is as follows:
NB5 has a local IP of 192.168.0.1
WRT has Internet IP of 192.168.0.2
I have created Static Routes (RIP) for each device, since the local WRT IP address and all my other nodes are on the 192.168.1.x network.
This has worked ok so far, as long as I use OpenDNS.org for my DNS servers. The WRT610n provides DHCP, while the NB5 has DHCP disabled. The WRT is setup as a Static connection.
What I would prefer is to setup the NB5 in Bridge mode, so that it does nothing besides modem funtions. I did that easily enough. I changed the WRT610n connection to PPPoE and entered in the username + pw. The WRt610n connected to the Internet without a hitch. I was able to ping and tracert to www.google.com and www.experts-exchange.com without any issues.
I changed the WRT610n DHCP so that the new DNS server is the WRT (192.168.1.2). My computers can ping 192.168.1.2 and can access each other - but they can't ping any web hosts. Internet doesn't work. The computers are set to DHCP - I've tried using my XP Pro laptop over wireless and my Vista desktop (cable).
I've tried pinging web addresses and Internet IPs (ie the modem's default gateway, and the OpenDNS servers) without any success, so it's not a DNS issue (yet). Any idea where the faul lies? Thanks in advance.
I've also had issues with the WiFi dropping out. Main reason fro upgrading to this router was that my old Wireless-B router wasn't fast enough for the number of devices using it (2 laptops, phone, PS3, Wii, etc). Since I like to stream movies from my PC (1Gbps connection) to my PS3, I figured the extra speed would be handy, plus my laptop supports 5GHz WiFi. Often when watching a video on the PS3, I will get the error "A network error has occurred" and playback stops. If I press the circle button and launch the video again - it immediately resumes playback from where it stopped. Sometimes when attempting to copy large files from one pc to another, it also drops out, not in the sense that I completely lose the connection - but in the sense that I get a File copy error due to a network error. Perhaps there's FirmWare out to fix this - I haven't checked just yet, but I'm off to bed for now.

Download Firmware 7.27 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
As your modem is set to Bridge mode make sure it is connected to the router's internet port...Access your router set-up and select the internet connection type to PPPoE and enter your username and password, click Save Settings, click on the router status tab and check the Internet IP Address(it should be public and not private)..If it is public you should be able to connect to Internet...Make sure to leave the DHCP Enabled...
Now adjust the Wireless Settings,
Click on the Wireless tab
2.4GHz Wireless Settings :
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
5GHz Wireless Settings :
Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network.
Set the Radio Band to Wide-40MHz and change the Wide channel to159 and Standard Channel to 161-5.805GHz...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

Photosmart B209a setup cannot connect to printer wirelessly

I've had a Photosmart b209a printer for about 2 years and used it with no problem. Couple of weeks ago upgraded to windows 8.1 and then neither of my two printers would print. Long story short, I restored the computer back to windows 8 (which was factory installed) and can now print on my laser printer but not the Photosmart. I have tried and retried installation and setup and always get the same problem: The IP address is visible on the router's list of network devices, it is visible on the printer's front panel in wireless settings, and when installing the software with USB it can see the IP address when trying to setup wireless connection. Then, the setup says it cannot connect to the printer. It sees the printer, attempts to contact the IP address, returns the following:
"Your computer is unable to communicate with your printer at 192.168.1.114. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
Your PC can not communicate with your printer at address 192.168.1.114. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
Obviously, the PC and router are turned on and connected. I even went to the security software and turned off the firewall AND created a new UDP port 427 and still no luck. What has happened to my printer???

Hey sue_M,
The first step that I would suggest, would be to run the HP Print and Scan Doctor. I have included the document 'Try the HP Print and Scan Doctor for Windows'. This will walk you through the download, as well how to use the tool.
Now to confirm a couple of questions with you.
1. What firewall do you use? (ie. Norton, Windows, MacAfee)
2. Do you just have the one firewall, or multiple firewalls?
3. For the UDP 427 port, have you made sure that this port is open in your router firewall?
Looking forward to your answers.
I worked on behalf of HP

I am trying to setup bootcamp on my MacBook Air. Network diagnostics doesn't believe I'm connected to the internet... but I am!!???

I am trying to setup bootcamp on my MacBook Air. I have a wifi internet connection which works fine in Safari etc. However, when I get to the point of downloading the windows install files I am told the network is not connected, but it is!
I have a simple automatic connection set up to a wifi router which works fine for all standard internet functions - mail, safari, downloads in safari etc. Where it falls down is that the system doesn't recognise it in network diagnostics. When I reach the point of downloading win installation files for my air from the internet it says I am not connected to the internet and runs network diagnostics which proceeds to break my internet connection. If I stop network diagnostics, close the windows and simply switch my wifi off and on then I'm back up and running, but the network diagnostics still doesn't believe it.
Any ideas? Seems completely illogical to me...

This is the message I get if that helps anyone...

I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section. How do I get there, nothing is working.

I am trying to setup my ipad 2 but I can't get back to the wi-fi connections section. How do I get there, nothing is working.

The Wi-Fi connections section is in Settings > Wi-Fi
If the home screen is not visible tap the Home button, the button on the front of your iPad that has the rounded square in it. Once you reach the Home screen swipe through the screen of apps until you find the Settings app. Tap Settings and go to Wi-Fi.
If your iPad is completely non responsive, try a restart.
Press and hold the Home button and the Sleep button simultaneously ignoring the red slider. Keep holding until the Aple logo appears and your iPad will restart.
The sleep button is on the side of your iPad on the side opposite from the Home button.

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

RV220W - Trying to setup an IPv6 connection

Hi,
My ISP provides IPv6 connectivity in the form of dual stack IPv4/IPv6 with DHCPv6 Prefix Delegation. Using a Cisco IOS-based router I managed to make such a connection by using as a template the Cisco IOS configuration file that my ISP has posted as an example in the following link:
http://ipv6.otenet.gr/current-config.txt
The main point on this configuration is a PPPoE connection with:
interface Dialer46
ipv6 address autoconfig default
ipv6 enable
ipv6 dhcp client pd LAN_DHCP
interface Vlan1
description local LAN
ipv6 address LAN_DHCP ::/64 eui-64
ipv6 enable
ipv6 nd other-config-flag
ipv6 dhcp server LAN_DHCP
I am now trying to configure an RV220W router on the same network but I cannot make it establish an IPv6 connection. Perhaps I am not setting it up correctly to make it work similarly to the Cisco IOS-based router. My settings are the following:
Networking -> IPv6 ->
IP Mode - IPv4 and IPv6 Dual-Stack
IPv6 WAN - DHCPv6 + Stateless Address Auto Configuration
IPv6 LAN - IPv6 Address: fec0::1, IPv6 Prefix Length: 64, DHCP Status: Enable DHCPv6 Server, DHCP Mode: Stateless, DNS Servers: Use DNS from ISP.
Router Advertisement: Status: Enable, Advertise Mode: Unsolicited Multicast
When I check the Summary page I see that although a have a proper working IPv4 connection, the IPv6 information is the following:
WAN (Internet) Information (IPv6)
Connection Time:                0 Days 00:07:10
Connection Type:                Dynamic IP (DHCP)
Connection State:               Connected
IP Address:                        fe80::5a8d:9ff:fee2:f9d3/64
Gateway:                           fe80::200:ff:fe00:0
DNS Servers:
which is of course wrong.
Could someone please help me to configure this router according the Cisco IOS configuration file I linked on the top in order to have a working IPv6 connection?

So, I did a WAN packet capture to see that type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
Therefore, this router does not support DHCPv6 Prefix Delegation services with firmware 1.0.3.5 and as a result in practice it is only good for tunnel IPv6 connections.
Are there any plans to provide support for Prefix Delegation?

Trying to setup airport for 1st time and it will not connect to internet, we also did not create a new network and cannot find this option again

Trying to setup airport for 1st time and it will not connect to internet?

You might try doing a reset of your AirPort unit. Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
For more advice, please describe all your networking gear.

LDAP Servers not listed when trying to setup new LDAP connection

Using SQL Developer: 1.5.1
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
Windows XP client environment
Can anyone clarify how to setup LDAP connections in SQL Developer. We use LDAP for our connections with all the other Oracle tools like SQL*Plus and other developer tools like forms. LDAP is working fine for all of those tools. However, when I try to setup an LDAP connection for SQL*Developer no servers are found for the drop down box. Do we need to put the sqlnet.ora and ldap.ora files somehwere so that SQL Developer can find them? Does SQL Developer even need them? How does the LDAP server get populated in SQL Developer? Thanks. I have tried looking at other posts on this issue and nothing really jumped out at how to do this. I do have some older version Oracle homes setup also. For example we have a Oracle 6i home setup on our machines for the old versions of forms and reports.

I set it to C:\Oracle10g_DevSuiteHome_1\NETWORK\ADMIN. This is under one of my Oracle Homes on this machine that contains the sqlnet.ora and the LDAP.ora files. This didn't appear to make any difference. Still no LDAP servers listed when you try to add or build a new connection. I tried some of my other Oracle Homes and still no effect. I have also tried copying the sqlnet.or and the ldap.ora files to other directories. I have switched my default Oracle Home to point to the 9i and above homes and this made no difference.
I have never had to do anything with an environment variable called TNS_ADMIN before. I almost remember a variable called TNS_ADMIN years ago in the registery that had to be modified and it was TNS_ADMIN if I remember correclty. When you said to set an environment variable you did mean to just set or create a new environment variable using the My Computer > Properties > Advanced Tab > Environment Variables on the client machine. I just want to make sure I set the right variable. Thanks for you help and suggestons.
By the way I can connect just fine using basic or advanced connections. I just would like to use LDAP so I don't have to maintain connections when port, server or SID change. For example we just failed over and the fail over database is on a different server. We do this as a test or when needed for failover purposes. If you are using the basic and advanced connections you need to go in a update connection information. If we use LDAP this is all maintained by the DBAs and individual clients shouldn't have to maintain any connection information as long as the have the right SID. The documentation for SQL Developer doesn't really seem to address how to setup LDAP connections it just mentions that you can do it and it sounds simple.

Im trying to setup my phone and I Keep getting this error. "Your iPhone could not be activated because the activation server cannot be reached. Try Connecting your iPhone to iTunes to activate it, or try again later.

Im trying to setup my phone and I Keep getting this error.
"Your iPhone could not be activated because the activation server cannot be reached. Try Connecting your iPhone to iTunes to activate it, or try again later.

Are you running one of the beta versions of iOS 7?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?

I am trying to setup airport express. do i have to have it connected to an ethernet cable? i want to connect it wirelessly

i am trying to setup an airport express wirelessly. can this be done or do i have to have an ethernet cable pluged into it?

You can set up the Express using AirPort Utility and wireless only, but you must first log on to the default network that the Expess provides.....Apple Network xxxxxx....and then open AirPort Utility.
No password is required.
For most users, the Ethernet cable method is simpler....if you have a spare Ethernet cable handy.

Trying to setup my iPad - get message "This iPad cannot be used because Apple Mobile Device service is not started." What does this mean? I am unable to get any connection at all..

I'm trying to setup my new iPad2 - get message "This iPad cannot be used because Apple Mobile Device service is not started". What does this mean? I can't get anything up on my iPad. Frustrated!

Assuming that you are on a PC then there are intructions here for starting it http://support.apple.com/kb/TS1567 , and for a Mac http://support.apple.com/kb/HT1747

PPPoE Connection Drops streaming video on my Linksys WRK54G

So I just set up my Linksys WRK54G Version 1.1 to handle my PPPoE connection, meaning I entered the username and password assigned to me via my ISP. It works for a bit and then seems drop the connection all together. When this occurs, I cannot even ping the router (192.168.1.1). I have to unplug the AC Adaptor and then plug it in, inorder for the connection to pick up again. It seems when I try to access streaming video from a certain site (http://www.mtv2.com/#videoPremiere/1552982) and I have PPPoE setup via my router, the connection drops. If I change the setting to "Obtain an IP Automatically" and send my PPPoE credentials through my Windows XP client all is well. No issues what so ever.
I called Linksys and they had me try setting my MTU to 1400 but that did nothing. I have the most recent firmware as well. He then said that I will need to call my ISP and increase the bandwidth on my modem to get it to work (connect directly to my modem).
I have since reset the router, downloaded the newest episode of "Heroes" and fired up You Tube and watched a few streaming videos while grabbing the torrent. Everything looked ok.
I then went back to the MTV2 link I posted above (http://www.mtv2.com/#videoPremiere/1552982) and clicked play. At the same time I set up a continuous ping to the router. Sure enough, the connection dropped completely. Unplug the AC Adaptor to the router for 1 second, plug it back in and all is well. I am truly stumped here.
Is the issue perhaps a port issue with the video I am trying to stream from MTV2? It seems regular stress tests work ok.
PS - It seems someone else was having a similar problem here: http://www.dslreports.com/forum/rema...?hilite=wrk54g
UPDATE: I went to bed and woke up and my connection has dropped completely, and I was not even downloading anything?! Can someone please help me with this issue?

well...i guess u have tried almost everything possible on the router...try TCP optimiser .. this should adjust the MTU settings of the NIC card on the computer....
if u are having issues on the wireless computer, change channel - 1 or 11 , change beacon interval - 50 , RTS and fragmentation threshold - 2304 ...

I am trying to setup VPN with QuickVPN

Hi I am trying to setup VPN with WRVS4400N and Quick VPN on client side. I am fairly new to VPN and did some research and looked through the manual but can't seem to get it to work so far and from what I noticed many people are having this problem. So hopefully someone can tell what the problem is or at least point to right direction on solving this.
Basically it gives the "Failed to establish connection" generic error, shows it almost instantly..
It also showed the certificate error before but then I read about putting it in the installation directory and it stopped showing it, and whats strange is later I removed it but it doesnt show the error any longer, so don't know if its caching it somewhere or what can be going on...
In effort to look for answer and test things out I tried to connect to another location and setup a WRV200 router, I also get the same error but not instantly, it even shows "Activating Policy" but then doesn't go farther and shows the generic error...
Also with this setup strangly it always shows the certificate error, no matter if I put one in directory or not... Even tried to name it as the WRVS4400N certificate name...
Anyway VPN IPSec is disabled, and Client Accounts are configured and changed password several times to make sure its correct, VPN Passthrough enabled on all 3 options.
I tried to disable Windows Router, I also have a router in place do I possibly need to open some type of ports for the QuickVPN client?
Don't know yet whats going on if I am missing something or if there is some problem that needs work-around but if you know the answer or guesses of answer please let me know.

Hi Aleksandr,
since this question is about a product in the Cisco Small Business / Linksys range, I suggest you move it to the community, where you will have a better chance of getting expert advice.
best regards,
Herbert
Cisco Moderator

Trying to setup systemd user instance

Hi guys!
For the past few days I have been trying to setup systemd to run a user instance (user is 'hans'). Sadly, I have been unable to find a lot of detail in doing this, so much of my work has been trial and error. Just recently I learned about the [email protected] and also about loginctl enable-linger. However to what degree they are related to setting up a user instance, I do not know. I set the user 'hans' to 'linger' using the loginctl enable-linger hans command, however I think I might have misunderstood the significance of the command in relation to what I am trying to do.
What I want to for user 'hans' to have his own service file, i.e. irssi.service, and start/stop/enable/disable/etc that service independently of the system. I realize that I could use sudo and configure it to only allow certain commands, and more than that have individual 'system' services for each user, i.e. hansirssi.service, janeirssi.service, joeirssi.service, etc., but I don't want to have to do that unless there is no other option.
So Question 1:
Is it possible to setup up systemd user instances as I envision it? Or have I misunderstood something?
My system:
[root@ru ~]# uname -a
Linux ru 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
The system is installed in a Proxmox virtual machine with a virtio virtual HDD and standard setup. It is a headless system. I have a complete systemd conversion as per the wiki plus polkit 0.107-2 for use with 'loginctl'.
I tried:
[root@ru ~]$ systemctl enable [email protected]
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@ru ~]$ systemctl start [email protected]
[root@ru ~]# systemctl status [email protected]
[email protected] - User Manager for hans
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: active (running) since Fri, 21 Sep 2012 18:33:07 +0100; 42min ago
Main PID: 23189 (systemd)
Status: "Startup finished in 822us."
CGroup: name=systemd:/user/hans/shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
And on the user account hans I confirm that the service is running:
[hans@ru ~]$ systemctl status [email protected]
[email protected] - User Manager for hans
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: active (running) since Fri, 21 Sep 2012 18:33:07 +0100; 13s ago
Main PID: 23189 (systemd)
Status: "Startup finished in 822us."
CGroup: name=systemd:/user/hans/shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
But in regard to actually starting/stopping/enabling a user specific service, I keep getting this error:
[hans@ru ~]$ systemctl start dummyservice.service
Failed to issue method call: Access denied
and when I try by accessing the 'user' instance, I get the following error:
[hans@ru ~]$ systemctl --user
Failed to get D-Bus connection: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
The thing is that dbus is running:
[root@ru ~]# systemctl status dbus
dbus.service - D-Bus System Message Bus
Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
Active: active (running) since Thu, 20 Sep 2012 18:19:18 +0100; 24h ago
Main PID: 248 (dbus-daemon)
CGroup: name=systemd:/system/dbus.service
â 248 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
Sep 21 18:12:40 ru dbus-daemon[248]: dbus[248]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 21 18:12:40 ru dbus[248]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 21 18:17:50 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid.../init ")
Sep 21 18:17:50 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 c...n/init ")
Sep 21 18:32:46 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid.../init ")
Sep 21 18:32:46 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 c...n/init ")
Sep 21 18:35:45 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid.../init ")
Sep 21 18:35:45 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 c...n/init ")
Sep 21 18:36:06 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid.../init ")
Sep 21 18:36:06 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 c...n/init ")
Here is the full output from 'journalctl':
Sep 21 18:17:50 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 comm="systemctl enable [email protected] ") interface="org.freedesktop.systemd1.Manager" member="EnableUnitFiles" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:17:50 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 comm="systemctl enable [email protected] ") interface="org.freedesktop.systemd1.Manager" member="EnableUnitFiles" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:32:46 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 comm="systemctl start [email protected] ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:32:46 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 comm="systemctl start [email protected] ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:33:07 ru systemd[23189]: Failed to open private bus connection: Failed to connect to socket /run/user/hans/dbus/user_bus_socket: No such file or directory
Sep 21 18:35:45 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 comm="systemctl start userservice ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:35:45 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 comm="systemctl start userservice ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:36:06 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 comm="systemctl start userservice.service ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:36:06 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 comm="systemctl start userservice.service ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Question 2:
Why would dbus reject the 'messages', is there something I need to configure (permissions,...?) in order to get this to work?
I suspect that it is my lacking knowledge to blame for this problem, which is why I have sought help here.
EDIT#1:
I forgot to show you what 'loginctl' was doing:
[root@ru ~]# loginctl user-status hans
hans (1000)
Since: Thu, 20 Sep 2012 18:19:18 +0100; 24h ago
State: lingering
CGroup: name=systemd:/user/hans
â shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
Last edited by sunite (2012-09-21 18:17:35)

I just went through the install process, read through the user-session-units doc, I was finally able to get the user instance working, no Dbus errors . However I decided to make sure and run 'dbus-monitor' within the user 'hans' and I got the following error message:
Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
I checked and there is no such file, however I checked the dbus.socket:
[root@ru user]# cat /usr/lib/systemd/user/dbus.socket
[Unit]
Description=D-Bus System Message Bus Socket
[Socket]
ListenStream=%t/dbus/user_bus_socket
And dbus.service:
[root@ru user]# dbus-monitor
Failed to open connection to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[root@ru user]# cat /usr/lib/systemd/user/dbus.service
[Unit]
Description=D-Bus System Message Bus
Requires=dbus.socket
[Service]
ExecStart=/usr/bin/dbus-daemon --session --address=systemd: --nofork --systemd-activation
ExecReload=/usr/bin/dbus-send --print-reply --session --type=method_call --dest=org.freedesktop.DBus / org.freedesktop.DBus.ReloadConfig
and as far as I can tell everything see alright there.
EDIT#1:
I just restarted the system to see if my symlink worked for the user-session service. It did, sort of, however the following error occured during boot:
Sep 21 22:15:14 ru systemd[307]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Last edited by sunite (2012-09-21 21:22:11)

HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Trying to setup PPPoE connection

Similar Messages

Maybe you are looking for