Trying to start ESD fails

I cannot start ESD. /etc/rc.d/esd start will fail. It switches me to console one every time, and i have to press F7 to get back to gnome, and it says that it failed. The first time, it switched to console 1 and outputted this error message:
Uhhuh. NMI received for unknown reason b0.
You have some hardware problem, likely on the PCI bus.
Dazed and confused, but trying to continue.
O_O All this for ESD? Anybody got any idea what that's supposed to mean/what I'm doing wrong?

Okay, never mind, it seems to have gone away on its own. That IS rather peculiar though, that message.

Similar Messages

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

When trying to start Photomerge in CS5 Photoshop fails and closes.

When trying to start Photomerge in CS5 Photoshop fails and closes. No error message. Any suggestions?

Hi
Tried again and hear are the results from various logs.
Program log
Feil 27.11.2011 12:21:39 Application Error 1000 (100) (Feil is means Fault)
Security log
Overvåking vellykket 27.11.2011 12:21:39 Microsoft Windows security auditing. 4672 Spesialpålogging (Overvåking vellykket means Surveillance succesful)
Overvåking vellykket 27.11.2011 12:21:39 Microsoft Windows security auditing. 4624 Pålogging
System log
Informasjon 27.11.2011 12:23:39 Service Control Manager 7036 Ingen
Informasjon 27.11.2011 12:21:39 Service Control Manager 7036 Ingen
Informasjon 27.11.2011 12:21:39 Service Control Manager 7036 Ingen
Informasjon 27.11.2011 12:21:01 UserPnp 20003 (7005)
Informasjon 27.11.2011 12:21:00 UserPnp 20003 (7005)
Informasjon 27.11.2011 12:20:57 UserPnp 20003 (7005)
Informasjon 27.11.2011 12:20:51 Service Control Manager 7036 Ingen

Following a message saying that my Startup disc was full and advising me to delete some files, I deleted my trash but then apps started to fail. When I tried to log on again, all I got was a blank screen and a cursor. I am a Mac Book Pro virgin, help

Following a message saying that my Startup disc was full and advising me to delete some files, I deleted my trash but then apps started to fail. When I tried to log on again, all I got was a blank screen and a cursor, so I am unable to delete any more files. I am a Mac Book Pro virgin, help

How much free space do you actually have? Go to the Apple menu and select About This Mac... More Info... and click on the Storage tab. You should see something like this...
This will show you how much free space you have and what's taking up all the space on your hard drive. You may need to backup and trash some seldom used files, applications, etc. You have to drag them into the Trash and empty the trash to regain the space. A general rule of thumb is that you should have about 15% of your hard drive storage free.
Good luck,
Clinton

Emac tried to start then stopped, finally after 3 attempts it started

After a hard drive failure i run my emac on an external hard drive through a fire wire.
That worked OK till yesterday when it tried to start but after a few seconds of the normal fan noise and before the screen lit up, it stopped. I hit the switch again and it did the same thing 3 times but on the 4th attempt it started but a white screen came on and told me to type "mac-boot" and hit return.
It finally started.
The external hard drive was still running OK at the time it had stopped, it was internally that it had stopped.
I took the back off the emac and vacuumed the dust from inside and after that it has since started normally every time though it seems slower to start, but I could be mistaken about that as I can't now remember noticing how long it took to start before.
Someone said the problem could be the power supply failing.
Is there any way for me to diagnose what exactly is wrong, since an emac power supply is not same as a PC power supply?
Could a PC power supply be modified to replace the emac power supply as I have a failed PC with a good power supply I could use if it would work?
Any help or suggestions would be appreciated.
Ann

Hello and thanks for your reply.
I neglected to mention that at the time of the hard disk failure I put a new hard disk inside too with the intention of using it as a back up to the External Hard Drive but I found it was easier in the end to get another external hard drive and now I use Time Machine to back up on to that 2nd external hard drive every few days.
I disconnect the 2nd external hard drive when I'm not backing up data on to it.
Most of the time when I boot up the emac it somehow knows to go straight to the 1st External Hard Drive instead of the Internal Hard Drive but occasionally it will go to the Internal Hard Drive and when it does that I have to go to System Preferences and then to Startup Disk and actually select the External Hard Drive icon and that's what I had to do every time when it was having that weird starting then stopping phase, ie, every time during the starting then stopping phase, when it did start it went to the Internal Hard Drive even after I would go into Startup Disk and select External Hard Drive it would start on the Internal Hard Drive, so in the end I didn't bother trying any more and I just connected to the internet through the Internal Hard Drive until I took the back off and vacuumed the dust out and ever since I did that it's been running normally, ie, it's always selecting the External Hard Drive again and running at what seems to be normal speed for everything too.
I just don't know why it went into that starting then stopping phase.
When it was in the starting then stopping phase the internal fan noise would stop but the little white light next to the DVD door would stay lit up so it was definitely getting some power from somewhere but it was failing to go on and boot up because the power to the internal fan had failed ie, I could clearly hear the fan stop only 3 or 4 seconds after hitting the start button.
I've just had a look at the capacitors that you suggested and they look perfect, like new in fact, they have a shiny metallic top with a + indented in the top and they are flat and they show no sign of a dried up liquid or any bubbling up anywhere.
Anyway, your reply was helpful since you ruled out the Power Supply and the capacitors, so thank you for those.
The friend who advised me how to get going again after the initial hard disk failure, ie, via the External Hard Drive connected by fire wire, did warn me not to touch anything in the back that wasn't directly related to changing the hard drive but thanks for the heads up anyway.
Ann

Got an Error trying to start scheduler services in obiee 11g

hi,
when i am trying to start the services in linux through ./opmnctl startall
got the following error Please help me out...
ias-component/process-type/process-set:
coreapplication_obisch1/OracleBISchedulerComponent/coreapplication_obisch1/
Error
--> Process (index=1,uid=1825388282,pid=4701)
failed to start a managed process after the maximum retry limit
Log:
/MiddlewareHome/instances/instance1/diagnostics/logs/OracleBISchedulerComponent/coreapplication_obisch1/console~coreapplication_obisch1~1.log
Regards,
Ramaraju

hi,
For setting the MDS password:
On the menu on the left, expand “WebLogic Domain”;
Right-click “bifoundation_domain;
On the pop-up menu select “JDBC Data Sources;
Click “mds-owsm”;
Select the “Connection Pool” tab;
Set the password and hit “Apply”;
To set the BIPLATFORM password:
Expand “Business intelligence” menu on the left;
Click the “Deployment” tab;
Click the “Scheduler” tab under deployment;
Click “Lock and Edit Configuration” button;
Set the password and hit “Apply”;
Click the “Activate Changes” button;
you can remove AdminServer.lok and bi_server1.lok
from: \user_projects\domains\bifoundation_domain\servers\AdminServer\tmp
Restart the services.
Regards,
VG

Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned

Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
   at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
   at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
   at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
   at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
   at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
   at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
   at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
   at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
   at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
   at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
   at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
   at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
   at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
   at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
   at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
   at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
   at org.mortbay.jetty.Server.doStart(Server.java:224)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at org.mortbay.start.Main.invokeMain(Main.java:194)
   at org.mortbay.start.Main.start(Main.java:534)
   at org.mortbay.start.Main.start(Main.java:441)
   at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
   at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
   at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
   at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
   at org.hibernate.loader.Loader.doList(Loader.java:2235)
   at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
   at org.hibernate.loader.Loader.list(Loader.java:2124)
   at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
   at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
   at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
   at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
   at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
   at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
   at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
   at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
   at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
   at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
   ... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
   at $Proxy29.prepareStatement(Unknown Source)
   at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
   at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
   at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
   at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
   at org.hibernate.loader.Loader.doQuery(Loader.java:696)
   at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
   at org.hibernate.loader.Loader.doList(Loader.java:2232)
   ... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
   at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
   at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
   ... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
   at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
   at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
   at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
   at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
   at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
   ... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">


<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>

<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>

<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>

<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>

<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>



<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>




<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>

<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>

<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>

</Get>
<Call name="init" />
</New>

<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>

<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>

<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>



<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>

<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>

<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>

<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>

<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>

<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">

<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">

<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>

<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.

Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
   at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
   at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
   at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
   at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
   at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
   at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
   at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
   at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
   at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
   at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
   at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
   at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
   at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
   at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
   at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
   at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
   at org.mortbay.jetty.Server.doStart(Server.java:224)
   at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
   at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at org.mortbay.start.Main.invokeMain(Main.java:194)
   at org.mortbay.start.Main.start(Main.java:534)
   at org.mortbay.start.Main.start(Main.java:441)
   at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
   at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
   at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
   at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
   at org.hibernate.loader.Loader.doList(Loader.java:2235)
   at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
   at org.hibernate.loader.Loader.list(Loader.java:2124)
   at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
   at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
   at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
   at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
   at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
   at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
   at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
   at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
   at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
   at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
   at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
   ... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
   at $Proxy29.prepareStatement(Unknown Source)
   at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
   at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
   at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
   at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
   at org.hibernate.loader.Loader.doQuery(Loader.java:696)
   at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
   at org.hibernate.loader.Loader.doList(Loader.java:2232)
   ... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
   at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
   at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
   at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
   ... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
   at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
   at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
   at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
   at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
   at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
   ... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">


<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>

<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>

<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>

<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>

<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>

<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>



<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>




<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>

<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>

<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>

</Get>
<Call name="init" />
</New>

<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>

<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>

<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>



<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>

<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>

<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>

<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>

<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>

<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">

<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">

<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>

<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.

After installation trying to start the portal but get credential error

Hi
I download the SAP Portal 7 and installed it as typical installation on Win XP. During the install it was asked from the wizard to put the master password. I did it and the installation was successfully finisched. Trying to start the server from the administration console i was asked to authenticate and put the username and password. After typing of the credential data i get in a message box: "invalied credential, start faild: 2" and the start of the server fail. I retyped and even reinstall the Portal 2 times to be sure that i do not make a mistake by typing the master password but each time i get the same error!!!!!
I installed it later again as custom installation and step by step put all neccessary passwords and the result was the same
Please help to resolve this problem and get the portal a start
Thank you for your help

Hi
Once you power on your unit keep tapping the F10 key go to Diagnostics menu Run the Hard drive & Memory test in case any test fails you need to replace the part. If both the test passes please let me know.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2

Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
Bo

Hi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo

Dns error when trying to start ssgd 4.4

Hi,
I get the following error when trying to start a fresh install of SSGD 4.4 on sun solaris 10 sparc machine
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
2008/05/12 18:34:43.082 (pid 27580) server/common/fatalerror #1210597482966
Sun Secure Global Desktop Software (4.4) FATAL ERROR:
The configured DNS name of the server (unknown) couldn't be
resolved in DNS.
The server can't start.
Check your DNS configuration.
I tried changing the servername in the httpd.conf file but still get the above errors. What could be the possibel reasons for this error.
Thanks,

Hi,
I changed the peerdns name to "penguin.everett.nl"
Cbash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#
However, when I now start the tarantella I get the following error :
bash-3.00# /opt/tarantella/bin/tarantella stop
Secure Global Desktop services are not currently running.
bash-3.00# /opt/tarantella/bin/tarantella start
Starting Secure Global Desktop server (version 4.40.917). Please wait...
javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:62)
at com.sco.jndi.toolkit.provider.SimpleContinuation.getSimpleException(SimpleContinuation.java:82)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:386)
at com.sco.jndi.toolkit.provider.ToolkitContext.namingException(ToolkitContext.java:401)
at com.sco.jndi.toolkit.provider.ToolkitContext.nameNotFound(ToolkitContext.java:436)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:62)
at com.sco.jndi.provider.file.FileCacheObject.<init>(FileCacheObject.java:39)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:83)
at com.sco.jndi.provider.file.FileCache.lookup(FileCache.java:68)
at com.sco.jndi.provider.file.FileContext.child(FileContext.java:612)
at com.sco.jndi.provider.file.FileContext.f_lookupLink(FileContext.java:889)
... 12 more
java.io.IOException: Failed to load all Beans : javax.naming.NameNotFoundException: asad.properties [Root exception is java.io.FileNotFoundException: /opt/tarantella/var/serverconfig/global/beans/asad.properties]
at com.sco.tta.server.server.JServer.<init>(JServer.java:327)
at TTAServer.run(TTAServer.java:391)
at java.lang.Thread.run(Thread.java:619)
bash-3.00# /opt/tarantella/bin/tarantella status
Array members (1):
- penguin.everett.nl (primary): NOT ACCEPTING CONNECTIONS.
bash-3.00#

I am trying to start my computer and it is coming up with a blank screen.what do i do?

I am trying to start my7 computer and it is coming up witha blank white screen. Although when i start it the sound is working. What should i do?

Mac OS X- Gray screen appears during startup
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

An error occurred while trying to start Isengard - Cannot start Wily IEM

Dear SAP,
I have installed Wily IEM 8.2.2.0 in my Solution Manager server (windows 2008).
I can start the service Introscope Enterprise Manager, but in the log, I get this error :
INFO   | jvm 1    | 2011/01/04 10:25:31 | Introscope Enterprise Manager failed to start because:
INFO   | jvm 1    | 2011/01/04 10:25:31 | An error occurred while trying to start Isengard.
INFO   | jvm 1    | 2011/01/04 10:25:31 | Press 'Enter' to acknowledge....
1. I have assigned SIDuser to the service
2. I have also read and apply 1273028 OSS recommandations.
Thanks for your help.
Best regards
SAP NetWeaverAdmin

Dear Everyone,
I got the same error. Today, I checked the log and it said something about Display 0.0. I guess the EMCtrl only works on graphical environment and I think I'm right. I run ./EMCtrl.sh through xmanager and it started and still started.
Maybe SAP create the scenario incorrectly by assuming the wily introscope can only be started on graphical environment. This is not wily introscope mistake, because if I install the wily manually, I can start it from ssh.

Driver errors reported when trying to start objects

We have a standard PCI can card, and are developing in the following environment:
Software written in VC++ Version6,
running under NT4.0,
Port configured as 'CAN0',
using extended arbitration IDs.
We create one network interface object, and, depending on the test configuration, four CAN response objects.
The problems are :-
1) if the network interface object (nio) is configured as 'start on open'= TRUE then the other objects fail to initialise. If the other objects aren't started, the nio works perfectly though.
2) If the nio is configured not to start on open, the other objects will initialise successfully (obviously not a lot of use though).
Any attempt to call ncAction trying to start any of the objects will however fail with a status of 0xBFF62002, which is CanErrDriver.
Below is a stripped down set of events as to how we start our card.
AttrIdList[0] = NC_ATTR_BAUD_RATE;
AttrValueList[0] = 125000; //BaudRate;
AttrIdList[1] = NC_ATTR_START_ON_OPEN;
if( Response_Enabled == 0 )
AttrValueList[1] = NC_TRUE;
NotificationStates = (NC_ST_READ_AVAIL |
NC_ST_ERROR | NC_ST_WARNING | NC_ST_STOPPED);
else
AttrValueList[1] = NC_FALSE;
// don't look for stopped state else it
// will interrupt continuously.
NotificationStates =
(NC_ST_READ_AVAIL | NC_ST_ERROR |
NC_ST_WARNING);
AttrIdList[2] = NC_ATTR_READ_Q_LEN;
AttrValueList[2] = 50; //500;
AttrIdList[3] = NC_ATTR_WRITE_Q_LEN;
AttrValueList[3] = 20;
AttrIdList[4] = NC_ATTR_CAN_COMP_STD;
AttrValueList[4] = 0;
AttrIdList[5] = NC_ATTR_CAN_MASK_STD;
AttrValueList[5] = 0; // NC_CAN_MASK_STD_DONTCARE;
AttrIdList[6] = NC_ATTR_CAN_COMP_XTD;
AttrValueList[6] = 0;
AttrIdList[7] = NC_ATTR_CAN_MASK_XTD;
AttrValueList[7] = 0; // NC_CAN_MASK_XTD_DONTCARE;
// Configure the CAN Network Interface Object
Status = ncConfig(szCanObject, 8, AttrIdList,
AttrValueList);
CheckStatus(Status, "ncConfig");
CCanObject* pCanObject = new CCanObject;
pCanObject->m_phObject = new (NCTYPE_OBJH);
ASSERT (pCanObject->m_phObject != NULL);
Status = ncOpenObject(szCanObject,
pCanObject->m_phObject);
CheckStatus(Status, "ncOpenObject");
if (Status == 0) // object was
// successfully created
// add the CAN object to the list,
// indexed by name
m_CanObjectMap.SetAt(strObjectName,
pCanObject);
// create a string to identify the Notification
pCanObject->m_pszObjectName = new char[strObjectName.GetLength() + 1];
strcpy(pCanObject->m_pszObjectName, strObjectName);
// Create the notification used to store incoming frames.
// CanCallback will be called whenever a frame is available,
// a background error occurs, or no frame is received for 30 seconds.
// We pass a pointer to the global Queue data structure to the
// callback's RefData parameter.
Status = ncCreateNotification(
*(pCanObject->m_phObject),
NotificationStates,
NC_DURATION_INFINITE, //CAN_TIMEOUT
pCanObject->m_pszObjectName,
CanCallback); // name of callback fn
// check callback was installed
CheckStatus(Status, "ncCreateNotification");
at this point we kick off a timer for 200 msecs, and then carry on when the timer expires.
This allows the card to get itself settled.
This consists of checking configuration, and doing the following code for each of the response objects.
The things that change are the object names, the arbitration IDs, and the response data.
AttrIdList[0] = NC_ATTR_COMM_TYPE;
AttrValueList[0] = NC_CAN_COMM_TX_RESP_ONLY;
//failed bff62002 if objects set to 'start on open'
// All of the following are here as a result of testing.
// The setting above is the one that should eventually be used.
// Finally resolved by not using start-on-open above.
// AttrValueList[0] = NC_CAN_COMM_RX_UNSOL; //worked
// AttrValueList[0] = NC_CAN_COMM_RX_PERIODIC; //failed bff62005
// AttrValueList[0] = NC_CAN_COMM_RX_BY_CALL; //worked
/// AttrValueList[0] = NC_CAN_COMM_TX_PERIODIC; //worked - crashed with unhandled exception on closure though
// AttrValueList[0] = NC_CAN_COMM_TX_BY_CALL; //worked
// AttrValueList[0] = NC_CAN_COMM_TX_WAVEFORM; //worked - crashed with unhandled exception on closure though
// Specify watchdog timer period
AttrIdList[1] = NC_ATTR_BKD_PERIOD;
AttrValueList[1] = 1000;
// respond with DLC
AttrIdList[2] = NC_ATTR_BKD_READ_SIZE;
AttrValueList[2] = 0;
AttrIdList[3] = NC_ATTR_BKD_WRITE_SIZE;
AttrValueList[3] = DataLengthCode; // normally 3
AttrIdList[4] = NC_ATTR_CAN_TX_RESPONSE;
AttrValueList[4] = NC_TRUE;
/* This attribute is ignored for CAN Objects which transmit data. */
AttrIdList[5] = NC_ATTR_RX_CHANGES_ONLY;
AttrValueList[5] = NC_TRUE;
// maximum number of frames to hold in read queue
AttrIdList[6] = NC_ATTR_READ_Q_LEN;
AttrValueList[6] = 0;
// The write queue length is set to zero (queuing disabled).
// This means that for each request, the most recent data written
// using ncWrite will be transmitted in a Data Frame.
AttrIdList[7] = NC_ATTR_WRITE_Q_LEN;
AttrValueList[7] = 0;
// build the CAN object name
sprintf(szCanName, "%s::XTD0x%08lx", CanBus, ArbitrationId );
//*arbitration IDs normally used are
//*0x19008000,
//*0x19008001,
//*0x19008002
// configure the CAN object
Status = ncConfig(szCanName, ATTR_LIST_LEN, AttrIdList, AttrValueList);
// check for errors
CheckStatus(Status, szTemp);
// Open the transmitting CAN Object. The object starts up, but it
// will wait for the first call to ncWrite before it transmits a Data
// Frame.
CCanObject* pCanObject = new CCanObject;
pCanObject->m_phObject = new (NCTYPE_OBJH);
ASSERT (pCanObject->m_phObject != NULL);
Status = ncOpenObject(szCanName,
pCanObject->m_phObject);
CheckStatus(Status, szTemp);
if (Status == 0) // CAN object created successfully
// Store CAN bus information into object
pCanObject->m_strCanBusName = CanBus;
pCanObject->m_strCanName.Format("%s", szCanName);
pCanObject->m_ArbitrationID = ArbitrationId;
// add the CAN object to the list, indexed by name
// put data into output buffer
for (int i = 0; i < DataLengthCode; i++)
Transmit.Data[i] = DefaultData[i];
// setup CAN object output buffer
Status= ncWrite(*(pCanObject->m_phObject),
sizeof(Transmit), &Transmit);
CheckStatus(Status, "ncWrite");
// create a string to identify the Notification
pCanObject->m_pszObjectName = new char
[strObjectName.GetLength() + 1];
strcpy(pCanObject->m_pszObjectName,
strObjectName);
Status = ncCreateNotification(
*(pCanObject->m_phObject),
NC_ST_WRITE_SUCCESS,
NC_DURATION_INFINITE,
pCanObject->m_pszObjectName,
NotificationCallback);
// check callback was installed
CheckStatus(Status, "ncCreateNotification");
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
So, Any ideas what we're doing wrong ??
The cards were new in December 2001.
Software driver version installed is Version 1.5.1
It makes little difference which card we use, as we have many cards at this site in various pieces of test equipment, and I have tried at least 6 !
Things are beginning to get a little depserate here =:-/
Regards,
John Webster.

Many thanks for the prompt reponse Diego.
A couple of comments on what you have written above.
The Response objects are only used for the 4 messages that need responses. All other messages are handled (received) by the Network Interface Object. Is it still therefore true to say that I should be using NC_CAN_ARBID_NONE ?
I think the answer will be yes, but want to confirm.
Am I correct to say that from your description, the only change was as belows :-
AttrValueList[2] = 0;
AttrValueList[3] = 0;
AttrValueList[6] = NC_CAN_ARBID_NONE;
Should I also be setting NC_ATTR_CAN_COMP_STD to NC_CAN_ARBID_NONE too ?
Many thanks for your help. This one has been causing us a lot of problems for a long time. I have changed many of the pa
rameters, but must admit I don't think I tried that one before.
Just off now to try this, see if it makes our code work !
Regards,
John.

Trying to start ESD fails

Similar Messages

Maybe you are looking for