Trying to start Imovie on Mac Os server on MacMini it shows message "Qwartz Extreme required" and quits.

Hello
I Installed oMovie on my new Mac Mini OS X Server edition in order to run comlicated and long movie calculatons with a huge amount of source data, that I do not want to keep on my MacBook Pro. But upon strating Imovie its shows me the message "Quarz Extreme required" and quits. Mac Book Pro works with Imovue Perfectly, but I do not want to waste hard drive for huge amounts of source data. I'm working with server through screen sharing on my MacBook.
Who can help me with this issue, Please!!!
Thanks
Oleg

Hi - No I don't know - But I supply my list of trouble shootings - May be You find help here - Else it needs more to be complete.
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Similar Messages

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

An error occurred while trying to start the Windows Deployment Services server

After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.

I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

Hi, I'm having a macbook pro here and it spoiled after a year of using, i though it was the power adapter problem because when i try to charge my mac battery that is depleted it shows a very dim light and my mac won't start up

Hi, I'm a macbook pro user but recently my macbook just spoiled, i though was my power adapter problem because when i charge my mac battery that is depleted, it shows a very dim light and my mac just won't start up, even i bought a brand new 80 euro power adapter it still give out the same result.

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ?

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

PS5 starts the error message unexpected / unexplained problem and quits

PS% starts, then error message "unexpected problem" then PS% quits.
Computer = MacBook Pro, 2011 model, 2.3 GHz Intel, 4 GB memory
have not used PS5 for about two years,
when I initially tried to open, received message that I needed to load JAVA for OSX 2014-001. Did that
PS5 is ver. 12.1x200110328 r. 145
Help. No chat service available.
pat

Please clarify: do you really mean the over a decade-old, archaic, obsolete Photoshop 5.x, or are you referencing Photoshop CS5?
If the latter, please don't refer to it as "PS5". Are you sure you are trying to start Photoshop in 64-bit mode? Photoshop CS5 is the only Mac version that ever offered a choice between 32-bit and 64-bit modes.
In 32-bit mode, Photoshop CS5 can only have access to a very limited amount of RAM.
Your 4 GB of RAM are very, very little RAM these days. You don't even mention the exact version of your OS.
Also, give machine details:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I want to backup my Mac to iCloud, but receive an error message recovery partition required. Is this an easy fix?

I want to backup my MacBook Pro to iCloud, but receive the error message "recovery partition required". Is this easy to fix?
Thanks for your time.

Sounds like your missing the partition. I have seen this before when I friend had a bad drive and took it in. Apple store replaced the driveamd installed lion but no partition. I had to reinstall lion from a full install DVD to build the recovery partition. Looks like you need to do the same. No data will be lost if you don't re-partition with the disk util. Just run the lion install from within lion and use the default. It will build the partition for you. Then re-run the apple updates for the 10.7.2 update which embeds the find my Mac part of iCloud in the recovery partition.
Good luck.

HT201240 how do I find my "recovery key" when trying to start up my mac minny

When rebooting my Mac Minny, it would not accept my password and directe me to start up in recovery mode, but then askes me o type my recovery key. I don't know what that is, or how to find it. Any help would be appreciaed.

No actually NOT on a desktop. As I've stated using my Android phone and trying to sync Foxfire on it. In order to do this, one of the questions is asking me for a recovery key number, I don't know where to retieve this number from ??? This has become VERY frustrating and ready to give up. Can you help ??? THANK YOU.....

I bought a Mac book pro. I tried to start it up tonight. When I enter my pass work that window dims and that's as far as I can go ... Can't even get in ...

Hi. I bought a Mac book pro and when I enter my password that box dims and that's all that happens. Anyone have any suggestions?

If this is a new machine, it'd be considered DOA (dead on arrival) - return it to the store; Apple stores have a 14 day return period. I'd ask for a replacement or a refund.

While trying to reset my new mac 2 default setting, i erroneously wiped off all the files and the OS X on the mac air.I tried re installing the os x, but i kept on having error after several hours download"the app to install the os x cant be downloaded

I am new to MAC systems...i bought one recently i loaded with some items i dont want anymore on the MAC. i attempted resetting to default settings but instead, i erroneosly wiped off the entire hard drive clean. I attempted to reinstall the the OS X, but i kept on having download failure. what i can do to salvage the situation.

but i kept on having download failure.
May be your internet connection ...
OS X Recovery requies a high speed broandband connection via Wi-Fi or Ethernet as noted here > OS X: About OS X Recovery
If it's convenient, you can sign up for Apple workshops > Apple - One to One

Hello. Friends I tried to turn on my Mac book pro there was a flicker of light on display and then the screen went black?. I purchased in2010. Please hel

Hello friends I turned on my Mac book pro there was a flicker of light and then the screen went dark ?please help

Did you buy the Applecare extended warranty? If not then you will need to pay for whatever repairs need to be done.
You will need to take the system to an Apple store Genius Bar for a check up.

I cannot download a movie purchase to my computer, I made the mistake of first trying to download it to my IPAD. It shows that it is trying to download to my MAC, but I continue to get error messages. I also have been load it to my I-pad

I can not download a movie purchase to my computer, I made the mistake of first trying to download my purchase to my Ipad. What is wrong?

What error messages???

Mac to XP. Windows not showing up in Sidebar. And mystery computer.

Hello. I'm trying to establish a small connection between my Mac and my mothers PC, she often have problems with it, and it is low on HD space, so I thought I could use my Mac as a storage kind of thing.
Anyhow, the PC does not show up in sidebar, and I can't connect using Go > Connect to Server > smb://192.168.1.3
I don't know why.
One computer is listed under shared, it is called joellundborfc48, and I have no idea what it is.
The PC connects to my Mac just fine, but not the other way, sadly.
My router is a Mici Broadband Router model KN-S1060.
Any help is appreciated.
Trying to connect via ethernet LAN, no wireless here.

If you have a Mac:
http://support.apple.com/kb/TS1591
For Windows:
http://support.apple.com/kb/TS1538

[MAC] Why do I keep getting this message: "This website requires a modern, standards compliant browser"

Oops! This website requiresa modern, standards compliant browser.
I keep getting this message when I try to open photographers websites. I'm using Firfox 30.0???

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
You can try to delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Trying to install Presenter but getting no where with a "fatal error" message on chrome, firefox and safari.

Tried disabling firewalls, plugins, allowed java script... oy! any ideas?

Hi Jorma,
Thanks for your help I initially tried to down load Captivate, but was having difficulty, it wasn't downloading, I looked at the specifications on the adobe site and realized I don't have a DVD-ROM drive. I thought maybe that was my issue.
Upon further research I realized that the Adobe product Presenter could also work for my project and didn't have the DVD ROM requirement so I tried downloading that from the website.
I began using Safari, when I clicked the "trial button", it took me to the download page, where I logged in with my Adobe login and hit download. Immediately an Adobe dialog box opened up - and it looked like it began processing the download, however within 5-7 seconds the fatal error appeared. I tried several more times with the same result.
I googled the error message and was directed to the Adobe forum page, which was under construction but gave the advise to try the Adobe Twitter page.
Upon doing so, the agent who responded recomeended I try downloading from a different browser. So, I did, I tried with Firefox and with Chrome, Both resulted in the same "fatal error" dialog box.
The agent recommended that i turn off firewalls, plugins, blocks etc... which, I tried... not sure if I did it right, but even so, got the same results and have been unable to download the trial. Im not really that technically inclined to instinctively know what to turn off or on.... But I sure can follow directions so, if you have an idea of how I could solve my issues that would be amazing! I was just going to log on to the Apple store to see if I could get an appointment with a genius to try to help me... but would love to save a trip out in the sub temperatures and use up my day!!!!
. I am using a Macbook Pro Retina, 15 inch (early 2013) with a 2.7 GHz Intel Core i7 Processor, 16 GB 1600 MHz DDR3 of Memory, and Intel HD Graphics 4000 1024 MB.
Thanks again so much for your time!!!!

Trying to start Imovie on Mac Os server on MacMini it shows message "Qwartz Extreme required" and quits.

Similar Messages

Maybe you are looking for