Trying to Start the install, computer locks up

So, i got this (what i believe to be considered) powermac G3, im new to macs, i got this thing for free, and its running the old version of Mac OS, i want to upgrade to 10.4 tiger, and i have the disc's and everything already, whenever it tries to start the install though, it asks you to restart so i click restart and it locks up, so i went under system pref's to try and switch startup to the Disk, and it locks up whenever i try that, and whenever i try to boot from the disc using the apple option shift delete thing, it never works, it sits and loads between the OS logo and a question mark, until i let go of the buttons, and then it just loads the old OS anyways..... any help would be highly appreciated, i got the computer from my moms work, its from a bank, i dont know if maybe they have some security feature on maybe or something, i dont know, i know next to nothing about these computers

(Some duplication here. My post and Adrian's crossed)
It sounds like you need to update the Firmware from 9.2. (You show you are running 9.2). Trying to install Tiger before you do so can lead to disastrous results. See this thread for more information. What kind of drive does the G3 have? Are you trying to use a DVD in a CD only Drive? CDs for Tiger, no longer available, were issued by Apple as DVD replacements (set of four). They are white overall with black text. If you have a DVD Drive, the proper DVD is black (silver X); that's the retail version. Other discs will be machine specific and won't work. For firmware updating see:
http://discussions.apple.com/thread.jspa?messageID=8838638&#8838638
Also Apple recommends 256 MB minimum Ram for Tiger, but that's bare bones. Minimum really is 512 or 768. Look in System Profiler for specs on you machine.
Here's a good place to look for compatible RAM, but call them first to determine exactly what you need.
http://eshop.macsales.com/item/Other%20World%20Computing/100SD512328/
Message was edited by: WZZZ

Similar Messages

  • I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

    I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
    There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
    Any comments or ideas ?
    Thank you in anticipation.

    First backup your users files off the machine to a external storage drive (not TimeMachine!)
    Most commonly used backup methods
    Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
    Disk Utility is under the Utilities menu on the second screen.
    Step by Step to fix your Mac
    If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

  • Error while trying to start the application

    Hi,
    Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
    --------Reading configuration for server: server1
    ADMU0111E: Program exiting with error:
    com.ibm.ws.process.exception.ProcessOpException:
    com.ibm.ws.process.exception.ProcessOpException: Error creating new
    process.
    Thanks in advance.

    Hi,
    Could any one please suggest the cause for this error. This error occured when I tried to start the application installed on Websphere server.
    --------Reading configuration for server: server1
    ADMU0111E: Program exiting with error:
    com.ibm.ws.process.exception.ProcessOpException:
    com.ibm.ws.process.exception.ProcessOpException: Error creating new
    process.
    Thanks in advance.

  • After installation trying to start the portal but get credential error

    Hi
    I download the SAP Portal 7 and installed it as typical installation on Win XP. During the install it was asked from the wizard to put the master password. I did it and the installation was successfully finisched. Trying to start the server from the administration console i was asked to authenticate and put the username and password. After typing of the credential data i get in a message box: "invalied credential, start faild: 2"  and the start of the server fail. I retyped and even reinstall the Portal 2 times to be sure that i do not make a mistake by typing the master password but each time i get the same error!!!!!
    I installed it later again as custom installation and step by step put all neccessary passwords and the result was the same
    Please help to resolve this problem and get the portal a start
    Thank you for your help

    Hi
    Once you power on your unit keep tapping the F10 key go to Diagnostics menu Run the Hard drive & Memory test in case any test fails you need to replace the part. If both the test passes please let me know.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

    Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
    I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
    visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
    "An unknown error occurred while trying to start the collection process."
    I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

    Hi,
    This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
    and Team Foundation Server.
    You have problems when using Concurrency Visualizer Extension, please ask in
    the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
    Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

    I'm having issues installing starting the WDS server service on Win 2008 R2,  this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
    'An error occurred trying to start the Windows Deployment Services Server.'
    Error Information: 0x0906
    EventID : 257 
    single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
    any ideas what might be the issue?  I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far... 
    With WDS tracing enabled I get the following error information:
    [4304] 09:22:11: ===>Starting logging of module [WDSServer]
    [4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
    [4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
    [4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
    [4304] 09:22:11: [RPC] Host Name: sccm.domain.local
    [4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
    [4304] 09:22:11: [RPC] Initialized
    [3756] 09:22:11: [RPC] Server Started.
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
    [4304] 09:22:11: [BINLSVC] Provider Initialized.
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
    [4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
    [4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [WDSDDPS] Deleted.
    [4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
    [4304] 09:22:11: [Udp] Listen Shutdown.
    [3756] 09:22:11: [RPC] Server terminated (rc=0)
    [4304] 09:22:11: [RPC] Listen Stopped.
    [4304] 09:22:11: [BINLSVC] Shutting down
    [4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
    [4304] 09:22:11: [BINLSVC] Deleted.

    It seems I've found out the solution myself,  the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
    get it working again is:
    1.      
    Install WDS Role (using defaults)
    2.      
    Make the following registry change:
    HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts  =  0
    3.      
    Run the following command line to initialize Windows Deployment Services:
    wdsutil /initialize-server /reminst:D:\RemoteInstall
    4.      
    Run the following command to enable the DHCP port registry setting
    wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

  • Facing problem when trying to start the addon manually

    Hi,
    I have created an add-on using simple addon installer project. The prepared addon has been installed successfully. After installation, when trying to start the addon manually by Add-On Manager,
    The addon exe is giving an error message at the line when try to instantiate the SboGuiApi.
    "SAPbouiCOM.SboGuiApi SboGuiApi = new SAPbouiCOM.SboGuiApi();"
    The error message is -
    "Could not load file or assembly 'Interop.SAPbouiCOM, Version=6.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
    and finally it gives an error message "Add-On connection timed out".
    Note: At the development end we have tested it on our two systems its working properly. But on the production system its giving the error
    Please help!! its urgent...
    Regards,
    Ashok

    Hi suresh,
    I have tried it number of times, but the problem not been addressed yet.
    Or can you please clearify what exactly do you mean by UIAPI.
    What we have did at our end is -
    Just removed the SAPbouiCOM.dll from the references and add it again.
    "I am using SBO 2005A SP01 PL-31"
    If you have any more ideas please reply back
    Thanks for prompt response
    Regards,
    Ashok

  • An error occurred while trying to start the Windows Deployment Services server

    After rebooting the server, I cannot start the Windows Deployment Services anymore.
    It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
    The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
    An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
    Error Information: 0x5B4
    An error occurred while trying to start the Windows Deployment Services server.
    Error Information: 0x5B4
    This is on server standard beta 3.

    I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
    When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
    Code Snippet
    wdsutil /Verbose /Progress /Uninitialize-Server
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Tearing down server...
    == Original server operational mode: Native ==
    -> Resetting setup state
    -> Disabling and resetting Windows Deployment Services services
    -> Removing server BINL SCP
    -> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST
    == Final server operational mode: Not Configured ==
    The command completed successfully.
    Then i did this command, but again it failed to start at the end.
    Code Snippet
    C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
    emoteInstall"
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Setting up server...
    -> Creating Windows Deployment Services installation tree
    ---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
    .longhorn.office\c$\RemoteInstall
    ---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
    fice\REMINST
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x86\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\ia64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\Fonts
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Tmp
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Mgmt
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\WdsClientUnattend
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Templates
    -> Installing Windows Deployment Services files
    ---> Installing system files
    ---> Installing boot files for x86
    ---> Installing boot files for ia64
    ---> Installing boot files for x64
    -> Updating registry
    -> Configuring the TFTPD service
    -> Configuring BINL SCP
    Enabling Windows Deployment Services services...
    Starting Windows Deployment Services services...
    An error occurred while trying to execute the command.
    Error Code: 0x41D
    Error Description: The service did not respond to the start or control request in a timely fashion.
    Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
    DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

  • While trying to start the Adminserver throws an error?

    Hi Guru,
    In installed Weblogic 10.3.5.0 and soa 11.1.1.5.0 rcu also 11.1.1.5.0.Java
    jrockit-jdk1.6.0_37-R28.2.5-4.1.0-linux-x64.bin.
    now after installation when i tried to start the Admin server throws an error. I did in virtual ips where
    soahost1vhn0----Adminserver------ on VM1
    soahost1vhn1----soaserver1--------on VM1
    soahost2vhn1-----soaserver2-------on VM2
    <Oct 12, 2013 12:36:47 AM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    java.net.UnknownHostException: soahost1vhn0
            at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
            at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:849)
            at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1202)
            at java.net.InetAddress.getAllByName0(InetAddress.java:1153)
            at java.net.InetAddress.getAllByName(InetAddress.java:1083)
            at java.net.InetAddress.getAllByName(InetAddress.java:1019)
            at java.net.InetAddress.getByName(InetAddress.java:969)
            at weblogic.rjvm.JVMID.setLocalID(JVMID.java:238)
            at weblogic.rjvm.RJVMService.setJVMID(RJVMService.java:48)
            at weblogic.rjvm.RJVMService.start(RJVMService.java:30)
            at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And WHEN I CHECKED THE ADMINSERVER LOGS
    Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/protocol/ServerIdentityManager$Initializer
            at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:64)
            at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:173)
            at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1078)
            at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:431)
            at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:417)
            at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206)
            at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482)
            at weblogic.Server.main(Server.java:71)
    What could be the reason. Please help .
    Thanks in Advance.

    hi, The problem is "java.net.UnknownHostException: soahost1vhn0"
    do you ping the "soahost1vhn0"??
    try that:
    ping soahost1vhn0
    if do ping then, you can add "soahost1vhn0" to you hosts file:
    vi /etch/hosts
    add your IP and the hostname:
    X.X.X.X soahost1vhn0
    Greetins,

  • When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

    When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

    The system on the original install dic is probably looking for the original video card.
    It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
    As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

  • I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time !

    I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time (I already unsinstalled the last Flash version and re-installed the new version many times but it doesn't work) and I always get this message (it's a summary because the real one is very very long - if you want the long version to help me with all the " facts ", just ask - thanks in advance " :
    Process:         Install Adobe Flash Player [1292]
    Path:            /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
    Identifier:      com.solidstatenetworks.awkhost
    Version:         3.3.6.0 (3.3.6.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [206]
    User ID:         501
    Date/Time:       2013-02-08 15:28:46.957 +0100
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Interval Since Last Report:          2909 sec
    Crashes Since Last Report:           10
    Per-App Interval Since Last Report:  15 sec
    Per-App Crashes Since Last Report:   3
    Anonymous UUID:                      9F1AAA7D-58CF-CECE-AA15-31385DEBF4E2
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
        __TEXT                 0000000000001000-0000000000050000 [  316K] r-x/rwx SM=COW  /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
    Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020 "

    I went on the Adobe website and I found this which helped me completely (thank to you Kaolay001) :
    17.
    Kaolay001
    8 feb. 2013 07:20   in reply to Hmalina
    http://forums.adobe.com/message-abuse!input.jspa?objectID=5057993&objectType=2
    Report
    How i solved:
    1 Mount the Flash Player installer .dmg file
    2 Copy the "Install Adobe Flash Player" file to desktop or any other directory as preferred
    3 Open terminal and cd to desktop or the other directory
    4 Run the following command on terminal: sudo ./Install\ Adobe\ Flash\ Player.app/Contents/MacOS/Install\ Adobe\ Flash\ Player
    5 Insert the password when asked

  • Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?

    Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
    Thanks

    Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
    Thanks

  • Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

    Hi All,
    I am getting the below error when trying to start the ToolsAndFrameworks.
    Starting Workbench (background process)
    The BASEDIR environment variable is not defined correctly
    This environment variable is needed to run this program
    Regards
    SK

    Hi SK,
    This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
    Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
    source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
    source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
    HTH,
    Mahesh

  • Getting warning while trying to start the Jdeveloper for first time

    Hi ,
    Every day i am facing this problem while trying to start the Jdeveloper first time, and not able to start till some time.
    i am getting the below exception...
    Unable to create an instance of the java virtual Machine Located at path
    E:\Oracle\Middleware\jdk160_24\jre\bin\client\jvm.dll
    Please can i have the solution to this..
    Regards,
    Rajesh

    user,
    better you remove the contact number. dont leave those things in forums,
    some one may misuse that.
    nice, you can search over forums.
    Jdeveloper installation issue
    https://cn.forums.oracle.com/forums/thread.jspa?messageID=9665899
    http://adfhowto.blogspot.in/2011/09/troubleshooting-unable-t-o-create.html
    https://kr.forums.oracle.com/forums/thread.jspa?threadID=1070230
    unable to create an instance of the Java Virtual Machine Located at path:
    http://pisceansheart.wordpress.com/2009/08/06/solution-to-unable-to-create-an-instance-of-the-java-virtual-machine-for-jdeveloper/

  • I just downloaded a registered copy CS4 Production Premium. I started the install. Entered the serial number

    I just downloaded a registered copy CS4 Production Premium. I started the install. Entered the serial number and Select "I have a SN...". On the next page the installer thinks I am upgrading and wants the "old" application & it's SN. What do I do now?

    WkgrayCS4 you will want to enter the serial number for the version you are upgrading from.  You can find your registered serial numbers at http://www.adobe.com/.  Please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html for more details on how to locate your previous version serial number.

Maybe you are looking for