Trying to switch to a Torch from a curve

Can't turn the Torch on, get message 'APP error 602 reset' what do I do? Thanks

The error appears on which device?
Read this:  "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7  
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Im trying to switch computers

    im trying to switch my ipod over from another computer but when i get on my other computer i cant sign in to itunes but on the other computer it does

        Hi abbyhill!
    Lets get your iPhone reactivated! You can begin the activation by logging into vzw.com/myverizon or by dialing *228 SEND and listening for the steps! Keep in mind, your Nexus will need to be powered off in order for activation to go through quickly. Keep me posted!
    Thanks,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Trying to switch from JDBC URL - JDBC DataSource

    I have built and run a JHeadstart 10.1.2 application using JDBC URL defined database connections.
    I am now trying to switch to use JDBC DataSource definitions to make the database connection independant from the application so that the same ear file can be deployed to different application servers (dev vs test environments).
    I have tried changing the Connection Type of the Business Component:
    Configurations > Edit > Connection Type
    from the previously defined JDBC URL to a JDBC Datasource defined within the embedded OC4j Application server. After making the change, rebuilding and restarting the server it still retrieves information from the previously defined URL.
    Is there something I need to regenerate/rebuild/reconfigure?
    Thanks,
    Kevin

    Hi Steven,
    I've seen that article. It's quite detailed and certainly helped until I ran into a VerifyError something like:
    java.lang.VerifyError: (class: oracle/ord/im/OrdDocBase, method: create signature: (Loracle/ord/im/OrdDocBase;Loracle/sql/Datum;I)Loracle/sql/CustomDatum;) Incompatible object argument for function call at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:140) at oracle.jheadstart.util.BindingUtils.class$(BindingUtils.java:66) at oracle.jheadstart.util.BindingUtils.isIntermediaBinding(BindingUtils.java:169) at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.setBindingInputHandlers(JhsDataAction.java:1159) at oracle.jheadstart.controller.strutsadf.action.JhsDataAction.processUpdateModel(JhsDataAction.java:622) at oracle.adf.controller.struts.actions.DataAction.processUpdateModel(DataAction.java:508) at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:112)
    I found this forum posting helped me...
    Re: JHeadstart Deployment Issue
    I couldn't run the application in a standalone instance of oc4j 9.0.4 even after following the deployment instructions found in this and other posts. It wasn't until I came upon a JavaWorld article from 2001 about VerifyError...
    http://www.javaworld.com/javaworld/jw-06-2001/jw-0615-howto.html
    I added -noverify to the startup arguments and the application ran fine.
    I admit I am a little concerned that I need to run without jar verification. Have you seen this before? Is there another way to deal with this?
    thanks,
    Kevin

  • I would like to restore my iphone to ios 4.3.5 from 5.0.1. i've tried and watched videos over youtube  and it doesn't helps. is there any other specific way? the ios 5.0.1 makes my phone crash and drains my battery whenever i tried to switch it back on.

    i would like to restore my iphone to ios 4.3.5 from 5.0.1. i've tried and watched videos over youtube  and it doesn't helps. is there any other specific way? the ios 5.0.1 makes my phone crash and drains my battery whenever i tried to switch it back on. kindly help me.

    There is no legit way to do this at all.

  • I am not able to install apps from the Appstore in Iphone 5c. I tried to switch off my phone and switch it on again. But it still doesnt work

    I am not able to install apps from the Appstore in Iphone 5c. I tried to switch off my phone and switch it on again. But it still doesnt work

    Hello stuti1200
    Check out the troubleshooting article below for issues with access to the iTunes Store. Also there was a small amount of outage accessing the iTunes Store this past Wednesday.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Apple Services, Stores, and iCloud
    http://www.apple.com/support/systemstatus/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT4628 I am trying to switch from AirPort to AirPort Extreme

    I am trying to switch from AirPort to AirPort Extreme. Followed all the directions, but cannot get APE
    to work unless AP is still plugged in. Frustrated. Help.

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.

    I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.  Any suggestions?

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • HT201269 hi, i got the iphone 5s today and i tryed switching my sim card from my iphone 4s to my iphone 5s and my sim card wouldnt fit

    Hi, I just received the iphone 5s and Im trying to put the sim card from my 4s and it wont fit.......What do I have to do?

    If the new iphone did not cope with a SIM, then you have to get a SIM card from your carrier for your iphone.

  • [SOLVED] Switching back to ALSA from OSS

    Good day fellow Archites,
    I am trying to get my audio working after another fresh install (I am getting good at this).
    The pertinent hardware is as follows:
    Mobo: ASUS P5G41T-M LX PLUS
    Sound: Onboard (Realtek ALC887 Chipset)
    The sound did not work after getting Arch to a good point (ie having KDE installed and pretty much everything else working).
    Arch however did detect the audio hardware, I just had no sound. I followed every wiki I could find on this and still no luck
    So I switched to OSS because I saw that Realtek seems to be a proponent of OSS, this didn't work very well and it didn't detect my audio card at all after this. (KDE/Phonon is prompting me to remove the previously installed hardware - I didn't do it)
    Promptly I tried to switch back. I think this is where I messed up.
    I couldn't find any sort of guide on switching from OSS back to ALSA, so I simply used "pacman -Rdds oss" hoping it would reverse the blacklisting process that it does to ALSA.
    After a reboot, KDE still prompted me still to remove the previously detected hardware because it is no longer there, meaning UDev isn't detecting it (I think).
    So my big question, how do I go from OSS back to ALSA properly?
    How do I re-enable the ALSA modules that are loaded on Arch boot?
    I have nothing in /etc/modprobe.d - there are no blacklisting files/configurations at all and I am at a loss.
    Thank you my nerdy genius's, or would it be genuii?
    Last edited by rhyvun (2012-02-21 00:29:40)

    brebs wrote:
    rhyvun wrote:
    find /lib/modules/ -name 'snd*.ko'
    Returns: Nothing
    find /lib/modules/ -name 'snd*.ko*'
    Returns: A TON of stuff, a lot of it not related I feel
    That makes no sense - provide more detail.
    E.g. you would expect files like:
    /lib/modules/3.2.5/kernel/sound/pci/hda/snd-hda-codec-analog.ko
    /lib/modules/3.2.5/kernel/sound/pci/hda/snd-hda-intel.ko
    /lib/modules/3.2.5/kernel/sound/pci/hda/snd-hda-codec.ko
    /lib/modules/3.2.5/kernel/sound/pci/hda/snd-hda-codec-realtek.ko
    /lib/modules/3.2.5/kernel/sound/acore/snd-timer.ko
    /lib/modules/3.2.5/kernel/sound/acore/snd-page-alloc.ko
    /lib/modules/3.2.5/kernel/sound/acore/seq/snd-seq.ko
    /lib/modules/3.2.5/kernel/sound/acore/seq/snd-seq-device.ko
    /lib/modules/3.2.5/kernel/sound/acore/snd-hwdep.ko
    /lib/modules/3.2.5/kernel/sound/acore/snd-pcm.ko
    /lib/modules/3.2.5/kernel/sound/acore/snd.ko
    So what would the 2nd asterix be additionally matching on?
    The 2nd asterisk returns a bunch of .gz files
    See below, I just posted the whole thing.
    I will post the output of all 4 commands.
    ===
    [mike@ARCH-Q9450 ~]$ find /lib/modules -name 'snd*.ko'
    [mike@ARCH-Q9450 ~]$
    ===
    ===
    [mike@ARCH-Q9450 ~]$ find /lib/modules -name 'snd*.ko*'
    /lib/modules/3.0.20-1-lts/kernel/sound/core/oss/snd-mixer-oss.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/oss/snd-pcm-oss.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/oss/snd-seq-oss.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-device.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-dummy.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-midi-emul.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-midi-event.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-midi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq-virmidi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/seq/snd-seq.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-hrtimer.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-hwdep.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-page-alloc.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-pcm.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-rawmidi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd-timer.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/core/snd.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/mpu401/snd-mpu401.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/opl3/snd-opl3-lib.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/opl3/snd-opl3-synth.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-aloop.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-dummy.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-mtpav.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-mts64.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-portman2x4.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-serial-u16550.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/snd-virmidi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/drivers/vx/snd-vx-lib.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/firewire/snd-firewire-lib.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/firewire/snd-firewire-speakers.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/firewire/snd-isight.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-ak4113.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-ak4114.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-ak4117.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-ak4xxx-adda.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-pt2258.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/other/snd-tea575x-tuner.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/snd-cs8427.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/i2c/snd-i2c.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/isa/sb/snd-sb-common.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/isa/sb/snd-sb16-dsp.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ac97/snd-ac97-codec.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ali5451/snd-ali5451.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/asihpi/snd-asihpi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/au88x0/snd-au8810.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/au88x0/snd-au8820.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/au88x0/snd-au8830.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/aw2/snd-aw2.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ca0106/snd-ca0106.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/cs46xx/snd-cs46xx.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ctxfi/snd-ctxfi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-darla20.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-darla24.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-echo3g.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-gina20.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-gina24.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-indigo.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-indigodj.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-indigodjx.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-indigoio.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-indigoiox.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-layla20.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-layla24.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-mia.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/echoaudio/snd-mona.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/emu10k1/snd-emu10k1.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/emu10k1/snd-emu10k1x.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-analog.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-conexant.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-idt.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-realtek.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-si3054.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec-via.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-codec.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/hda/snd-hda-intel.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ice1712/snd-ice1712.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ice1712/snd-ice1724.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/korg1212/snd-korg1212.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/lola/snd-lola.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/lx6464es/snd-lx6464es.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/mixart/snd-mixart.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/nm256/snd-nm256.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/oxygen/snd-oxygen-lib.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/oxygen/snd-oxygen.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/oxygen/snd-virtuoso.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/pcxhr/snd-pcxhr.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/riptide/snd-riptide.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/rme9652/snd-hdsp.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/rme9652/snd-hdspm.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/rme9652/snd-rme9652.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-ad1889.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-als300.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-als4000.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-atiixp-modem.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-atiixp.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-azt3328.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-bt87x.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-cmipci.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-cs4281.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-cs5530.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-ens1370.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-ens1371.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-es1938.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-es1968.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-fm801.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-intel8x0.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-intel8x0m.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-maestro3.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-rme32.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-rme96.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-sonicvibes.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-via82xx-modem.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/snd-via82xx.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/trident/snd-trident.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/vx222/snd-vx222.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pci/ymfpci/snd-ymfpci.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/pcmcia/vx/snd-vxpocket.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/soc/snd-soc-core.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/synth/emux/snd-emux-synth.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/synth/snd-util-mem.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/6fire/snd-usb-6fire.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/caiaq/snd-usb-caiaq.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/misc/snd-ua101.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/snd-usb-audio.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/snd-usbmidi-lib.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/usx2y/snd-usb-us122l.ko.gz
    /lib/modules/3.0.20-1-lts/kernel/sound/usb/usx2y/snd-usb-usx2y.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/mpu401/snd-mpu401.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/opl3/snd-opl3-lib.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/opl3/snd-opl3-synth.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-aloop.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-dummy.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-mtpav.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-mts64.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-portman2x4.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-serial-u16550.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/snd-virmidi.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/drivers/vx/snd-vx-lib.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/firewire/snd-firewire-lib.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/firewire/snd-firewire-speakers.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/firewire/snd-isight.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-ak4113.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-ak4114.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-ak4117.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-ak4xxx-adda.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-pt2258.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/other/snd-tea575x-tuner.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/snd-cs8427.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/i2c/snd-i2c.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/isa/sb/snd-sb-common.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/isa/sb/snd-sb16-dsp.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/pcmcia/vx/snd-vxpocket.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/soc/snd-soc-core.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/synth/emux/snd-emux-synth.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/synth/snd-util-mem.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/6fire/snd-usb-6fire.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/caiaq/snd-usb-caiaq.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/misc/snd-ua101.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/snd-usb-audio.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/snd-usbmidi-lib.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/usx2y/snd-usb-us122l.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/usb/usx2y/snd-usb-usx2y.ko.gz
    [mike@ARCH-Q9450 ~]$
    ===
    ===
    [mike@ARCH-Q9450 ~]$ find /lib/modules -name 'sound*.ko*'
    /lib/modules/3.0.20-1-lts/kernel/sound/soundcore.ko.gz
    /lib/modules/3.2.5-1-ARCH/kernel/sound/soundcore.ko.gz
    [mike@ARCH-Q9450 ~]$
    ===
    ===
    [mike@ARCH-Q9450 ~]$ find /lib/modules -name 'sound*.ko'
    [mike@ARCH-Q9450 ~]$
    ===

  • Trying to switch to kde but...

    So I'm trying to switch to kde not because I dislike gnome but because I'm curious about kde.  So far I've had a few issues that keep me going back to gnome where I haven't even had to deal with this problems.
    I have a Thinkpad X201 which is a small laptop (12.1 inch screen).  When I get to work I dock and close the lid and use a 21 inch screen.  The laptop screen is off.  When I un-dock it, it seamlessly switches back to the laptop screen.  I didn't have to do anything to get this to work in gnome other than set it up under the display settings.  KDE, I have to configure it on each boot, and it seems a little buggy sometimes (as in it doesn't do the same thing each time even though I go through the same proceedure, like the laptop monitor says even when I say to disable it, until I re-enable it and disable it a second time).  It doesn't always happen but it does sometimes.  I know I can default it to one setting but when I un-dock it or reboot it with the external monitor as default it doesn't go back to the laptop display like gnome does (which mean I don't get a screen on my laptop to switch it back to the laptop).  I went through the intel/xorg/kde wiki's and either I missed it or it doesn't really say anything about my situation.  I saw the multi-monitor settings for xorg and tried it but it did nothing.
    This alone make kde not an option as I'm constantly going back and forth from docked to un-docked and can't keep manually switching display settings.
    Also, I tried my vm's in virtualbox and it complained as I started the vm that it was configured for 32 color but that kde is set to 24 bit.  I see no settings to change it in kde and forcing it with an xorg config file does not take.  How do I change it to 32bit color?
    Some of the other quirks I can sort of deal with (clock size, qt/gtk integration, others) but those above will keep me gnome until they can be solved.
    $ lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
    02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

    The problem I'm having is more extreme than yours but possibly related. (There's a thread here somewhere and a forum thread on the KDE site.) I need to sit down and try to recreate the issue in my office.
    Apart from the configure-every-time on connect and configure-twice on disconnect, I also tend to find I lose all display on disconnect (not immediately but shortly after). Either ll display for X or all display period.
    It is probably the biggest issue I have right now (apart from the new kernels - but the lts one works great).
    Possibly related:
    https://bugs.kde.org/show_bug.cgi?id=291819
    https://bbs.archlinux.org/viewtopic.php … 0#p1079700
    http://forum.kde.org/viewtopic.php?f=22&t=101058
    There are some other bugs/threads on the KDE sites if you search...

  • I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now her password won't allow her into my computer, even though it says it's her account. Is there any way to bypass the password screen?

    I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?

    If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
    Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8).  If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
    Insert the disk then power down
    HOLDING the C key, power up to boot from the disc.
    Get to Disk Utility
    If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
    When it completes the Repair process successfully as indicated in DU, do a shut down.  If Repair is not successful then an different course of action is indicated below.
    Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
    If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM  DO NOT ERASE THE DISK OR VOLUME FIRST.  REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system.  After re-installing the OS do a software update.  Note that ERASING the disk is NOT required to do an OS re-install.  This allows your existing data and application files to remain.
    If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
    If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk  and try a re-install.
    If that fasils then you may have a defective hard disk.

  • Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

    Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
    I have tried shutting down, closing tabs, with no success.  What's going on and how can I fix it?
    Thanks,
    Cindi B
    PS:  I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

    A Safari extension or third party plugin may be causing the menu bar issue.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    As for which OS X is installed.
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.
    v10.6 Snow Leopard v10.7 Lion  v10.8 Mountain Lion
    It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

  • HT5621 When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?

    You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'.  When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone'  Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted.  This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.

  • Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  How do I recover iTunes?

    I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop.  How do I recover iTunes?
    I'm switching from a 3G phone to a blank 4GS in the process.  I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
    Thanks

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

Maybe you are looking for

  • Passing the structure to rfc function module

    hi, iam having a rfc function module which is importing structure. i have to pass only one field value to that structure. how can i pass that field value to that structure. it is very urgent. thanks in advance

  • FM SUBST_GET_FILE_LIST no longer available in Release 702 ?

    We are in the process of upgrading to ECC 6 Release 702. In the new release, the standard Function Module SUBST_GET_FILE_LIST (which is used to get a list of files on an application server directory), has all its code commented out and replaced by a

  • Problem while using v$parameter in a package

    Hi. I have to get some data from the v$parameter view inside a package but when I compile it, it throws me the error "PL/SQL: ORA-00942: table or view does not exist". However, the schema owner of the pacckage has privileges over that view because wh

  • Citrix NetScaler Management Pack Account

    Hello, I read the documentation and noticed this: The Citrix NetScaler Management Pack requires log on credentials of the NetScaler systems it is managing to be able to take corrective actions when the virtual servers become unhealthy. I created the

  • Printing txt/doc files using Java

    Hi, i need to take in info from a GUI and format it nicely, then print it. Ive never done any printing from Java before so to get started im just trying to read in some text from a '.txt' file and send it to the printer. I can detect the printer corr