Trying to sync my husbands old Ipad to my computer and the computer does not recognize it as even being connected. When I open Itunes nothing shows to sync.

I am trying to sync an old Ipad to my computer. It says it is version 3.2. When I plug it into my USB, nothing happens. My computer will not even recognize it. I can sync my Ipad 2 and all Ipods with no problem. Have no idea what to do???????????????

ipadsammamish wrote:
I am trying to sync an old Ipad to my computer. It says it is version 3.2. When I plug it into my USB, nothing happens. ...
Have you charged it using the Wall Charger... If not... Plug it in for about an hour and then Connect to your computer.
There is also this, should you need it...
iPad not appearing in iTunes

Similar Messages

HT201302 I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them Do you have to use PhotoStream to do this. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Tha

I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?

How did the photos that you want to copy off get on the iPad ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

I am trying to set up my new ipod touch and the system does not recognize my apple id. How do I reset and start again. I'm not sure what to do now.

I can be reached at this email during the day [email protected]

Try to change your Apple ID back to your old email address (http://appleid.apple.com) in order to set up and activate the phone. After the set up please sign out of iCloud and turn off "Find My iPhone" (Settings > iCloud) - do that on all your devices -, then change your Apple ID to your new address again and then add your iCloud account on you devices again.

After syncing my husband's iPad 2 with our home Imac computer, now apps won't open on ipad2. What do I do?

After syncing my husband's iPad 2 with our home Imac computer, now apps won't open on ipad2. What do I do?

If it is the third party apps that you are having problems with - try downloading another app - any free app will work. See if the apps will open after you try that. Or look here for help.
Troubleshooting applications purchased from the app store

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

My problem is that my iCal won't sync from my first-generation iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud.

I'm just an old lady who doesn't know a lot about this stuff, but I do love my iPad and miss my portable calendar! My problem is that my iCal won't sync from my (first-generation, cheaper of the two models) iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud. I've had this problem for nearly a year now. My Really Really Smart son couldn't fix it for me.

djb53 wrote:
Can take some time.... how much time?
There's no simple answer to that. My calendar goes back to 2004 and is moderately busy; it took around an hour. It's possible that you've hit a slow period on the server - it happens.
In order for it to work, your calendars should show on the MobileMe site, they should be listed under your MobileMe login name in the calendar list in iCal (calendars listed under 'On My Mac' will not sync) and your MM account details have to be entered in iCal Preferences>Accounts (this should have happened by itself).
If it's not working please see the page I linked to.

TS1702 I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried t

I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried to download on different broadband lines without success. Is this an apple problem due to high demand or something else?
Everything has worked well until about a month ago, up to date iOS 5 and itunes installed. Tried resetting numerous times, turned off all apps still no joy. Ipad was great but now feeling buying one was mistake. Also recent music purchase was useless and tunes would not play correctly.

Since this is happening on the iPad and the computer, it might be worth a try to reboot your router - unplug it from power for about 30 seconds and then plug it in again.
Quit iTunes on the PC, reboot it and the iPad as well
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

When an app update is available in the ipad appstore, a WAITING message appears under the app and the installation does not proceed

When updates are available in the ipad app store, I click on install and under the app a WAITING message appears. No installation is done and the message does not disappear. I have tried hard and soft resets without success. The ipad (1st gen) runs under iOS 5.0.1. I now have 5 apps waiting for installation of updates.

You can also finish the downloads in iTunes on your computer and then sync the updates to the iPad. From the iTunes menu on your computer go to Store>Check for Available Downloads.

I have an ipad2. PLEASE can anyone tell me if I can watch a movie purchased from iTunes without wifi (after I have downloaded the movie and hit play while connected). My husband is going for chemotherapy and the hospital does not have wifi.

I have an ipad2. PLEASE can anyone tell me if I can watch a movie purchased from iTunes without wifi (after I have downloaded the movie and hit play while connected). My husband is going for chemotherapy and the hospital does not have wifi.

Yes, if the movie has been downloaded to the iPad, then you can watch it without Wi-Fi.

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.

I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Trying to sync my husbands old Ipad to my computer and the computer does not recognize it as even being connected. When I open Itunes nothing shows to sync.

Similar Messages

Maybe you are looking for