Trying to Time Machine from Leopard to new mac Snow L

I just got a new MacBook Pro 10.6.3 and am trying to restore via Time Machine from my current 10.5.8. I just waited 2 hours "Copying Volumes" but nothing happened.
I must be missing something simple but I can't find it.
thanks
brian

Hi, and welcome to the forums.
If you mean you're doing a full system restore, that's not going to work. A new Mac that came with Snow Leopard cannot run Leopard.
You'll need to boot up from the Snow Leopard Install disc that came with your new Mac. Select your language, then from the menubar, select Utilities, then +Disk Utility+ and reformat your internal HD. See the yellow box in #1 of [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. Use the GUID *Partition Map Scheme* and +Mac OS Extended+ Format. That will only take a few moments.
Then quit Disk Utility and install OSX.
When your Mac restarts, it will be just like it came from the factory. Use +Setup Assistant+ to transfer your data from your old Mac or it's backups, per [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html].

Similar Messages

  • Time machine from macbook to new mac air

    hi i just bought a new macbook air and connect my seagate backup plus drive but is not letting me see any of the information i had from my previous macbook pro

    Hold down the option key and select
              Browse Other Backup Disks...
    from the Time Machine menu in the menu bar. The menu icon looks like a clock running backwards. If you don't have that menu, open the Time Machine preference pane and check the box marked
              Show Time Machine in menu bar

  • Time Machine after migration to new Mac

    So, I just got a new Mac, and used the option to copy settings and files from a Time Machine volume to the new machine. Now that everything's run, though, I can't use Time Machine to backup the new Mac -- it says "Volume not found". I've Googled a bit, but most of the troubleshooting seems to assume that the drive is missing or won't mount -- the drive is there, but the Time Machine software won't use it.
    What are my options here?

    Hi VK
    A supplementray question:
    I have one i-mac happily backing up with Time Machine to an external hard drive.
    I have just bought a second i-mac (stops the fighting!) and propose to use migration assistant to move my [admin] account from the old to the new i-mac leaving two other accounts on the old one. I see from your posts that it seems as if Time Machine will start a new back up series for the new i-mac's back ups. But what about the old i-mac? Will that continue to extend the existing Time Machine back up files, albeit without my transferred account and its files? If so, should I partition the external drive and start the new back ups from the new i-mac on this new partition. I'd like to end up with the old i-mac continuing to build its Time Machine back ups (less my account and its files) and have a new back up series from the new i-mac building to a separate partition on the external drive.
    Does this make sense? I can't see an answer in the forum to what must be a reasonably common issue in this expandin mac world.
    MVBW
    Mervyn

  • HT201250 existing Time Machine backups to a new Mac

    how do i migrate existing time machine backups to a new mac from my time capsule?

    It took a little more research, but that link in the end solved my problem.  After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
              sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
              sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
              sudo tmutil setdestination /Volumes/<capsule>/
    "2012-12-09-114511" was the latest snapshot that was there.  According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

  • I used migration assn't to load a Time Machine backup onto a new mac.  The first TM backup after that took some time, perhaps not surprising.  But the backups thereafter have all taken hours, with huge amounts of "indexing" time.  Time to reload TM?

    I used migration assn't to load a Time Machine backup onto a new mac.  The first TM backup after that took some time, perhaps not surprising.  But the backups thereafter have all taken hours, with huge amounts of "indexing" time.  Time to reload TM?

    Does every backup require lots of indexing?  If so, the index may be damaged.
    Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
    If that doesn't help, see the pink box in #D2 of the same link.

  • Time Machine backup fails on new Mac

    I used Migration Assistant to transfer data from my old Mac Pro G5 to my new Intel Mac Pro. I erased the backup disk (500 GB My Book) then attempted to use Time Macine to backup the new Mac Pro. It won't start on it's daily schedule. When I select "Back up now", the icon in the tool bar indicates it starts to backup but then quickly stops. When I open Time Machine, it says: Backup - Failed. There is no error message so I don't know what else to do. Have any of you had this problem? If so, what did you do to solve it?
    Thanks for any help.

    in DU, select the whole drive (model, not name) and click on the partition tab. set the number of partitions to 1 and click on "options". set the partition scheme to GUID there. set the format to mac os extended journaled and click "apply".
    once the disk is reformatted go to TM system preferences and set up TM.

  • Can I still use my "old" Mac after restoring Time Machine backup to a new Mac?

    Hi guys.
    Will I still be able to use my old Macbook Pro 2008 (Leopard) after restoring his latest Time Machine backup on a new Macbook Pro 2012 (Lion)?
    Using Setup Assistant and transfering data using Time Machine creats the same Account on the new machine that was on the old one. I just don't know how the old machine will react towards his clone. I don't want to make a mess...
    Please let me know.
    Thanks

    It should work if the drive is connected directly to your Mac. That is not the same as saying that it will work.
    Since Mountain Lion was just released, it might make sense to hold on a few weeks and watch the forums for new and unforeseen issues before you dive in.

  • Time Machine stopped working with new Mac address.

    Greetings,
    I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address and do not have access to the old Mac address. Is there any way that I can get the IOMEGA to start working with Time Machine? If so please give me step by steps instructions on how to make this external hard drive work again with Time Machine.
    Any help is most appreciated.
    Thank you for your attention to this matter.

    macuserr222 wrote:
    Greetings,
    I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address
    Do you have a new Mac, or a new logic board? Either will get you a new MAC (Media Access Control) address, which Time Machine interprets as a different Mac.
    Do you mean you haven't started doing backups of the new Mac, and want to view the old ones? If so, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If you want to use the old backups to set up a new Mac, see [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum).
    When you do your first backup, OSX should ask how you want to handle the old backups. See #B5 in Troubleshooting for details.
    If that's not what you mean, please explain exactly what's going on, and what happens when you try to do whatever you're doing.
    Message was edited by: Pondini

  • Cannot use Migration Assistant to migrate from a Time Machine backup to a new Mac.

    I have a supposedly valid Time Machine backup for both of the MacBook Pro's we have (had).  My wifes is Pro is working but mine died.  I am replacing it with a MacBook Air.  Following the steps, I tried to Migrate all my Pro files and apps from a TM backup using the Migration Assistant but it stops at 'Looking for source' and never gets past this.
    I have confirmed the wife's back up is valid using 'Enter Time Machine'. However, on that same Mac Pro, if I use the Migration Assistant, it does not find the hard drive, once again , getting stuck at 'Looking for source just like on the Mac Air.
    I went back to BestBuy where I bought the Air and worked with the Apple  Rep.  He tried it himself on a Mac Pro they had in the store and got the same results.
    We called this into MyApple and after elevating this to the next level, they still cannot explain it.
    I have used this feature in the past prior to upgrading to Mavericks so I am wondering if the fault is there?
    Any suggestions?
    Thanks,
    Dave

    I may have solved this (partly). A search reveal A LOT of peoplel having the same issue.  One solution put forward was that the Time Machine backups were not complete.  I noticed in mine, non of the backups for a quite a while have no Applications or System files backup.  The solution was to do a TM reset.  I did that and ran a new backup of the one MacBook Pro that is still working.  After it was complete, the backup had the Applications and System data in it.  I was able to open the Migration ssistant and it found the drive.
    Now I just have to hope that the repair shop can salvage my malfuncitoning MB Pro so I can solve the main issue either by Migrating fromht MB Pro or make a new back up of the MB Pro after TM reset and use that for the migration.  Won't till tomorrow (hopefully).
    Dave

  • How to stop Time Machine from creating entirely new backup of external drive?

    I've included an external drive to be backed up into Time Machine. For a few days, the drive was disconnected, however, so only Macintosh HD was getting backed up. I recently re-added the external drive. However, now it appears that since the external wasn't included in the most recent backups, it's decided to re-backup the entire drive.
    Is there any way to prevent it from backing up the entire external drive and instead just backup the changes made, or is that not possible because there is a gap in the backups made for the external?

    First, the amount that TM says it's going to back up is not necessarily the amount it will back up. You'll only know that when the backup finishes.
    I haven't tried this myself, but it may be that after you exclude a volume, TM loses continuity with the previous snapshot. In that case, future backups should be incremental, as long as you don't exclude the volume again.

  • How can I migrate data from old macs second harddrive in time machine backup to my new mac?

    Hi,
    I have a little problem migrating all my data from my old Macbook to my new Macbook. I had two harddisk installed in my Macbook and did make a backup to a USB Disk. It seems that both harddisk are included in the backup. I can see them in Time Machine.
    Now I want to restore my data to the new Macbook Retina. Unfortunately the Migration Assistant only shows the system disk, but not the data disk.
    How can I access the data disk in the backup to restore the data to some directory on the new Macbook? The data is mostly the iTunes Library of my old Macbook.
    Regards

    If the migration assistant doesn't work and you have no backup then you will have to take another path that involves a little more manual work. Anyway in your situation a fresh start seems like a good idea. So set up your new Mac with the same username and afterwards copy your user folder from the old to the new either using your ethernet connection or an external USB drive. This will also bring your user's Library folder along and retain most of your settings at least as far as they are applicable in Mavericks.
    HTH
    Martin

  • Getting Photos from Time Machine Backup disc to new mac

    Hi! I have everything saved from my macbook on an external hard drive via time machine. When I go into time machine and the back up from my mac book, I click on users and then photos and then iphoto library and have no problem seeing my library...
    BUT
    Now I am trying to download all of the photos from the backup onto my husband's macbook. When I go to import on iphoto and then go to the backup disc... I cannot select iphoto library. It is a faded color and won't let me select it. It makes me worried that I can not access my pictures from another computer and cannot download them onto my husband's computer.
    What is the problem and how do I resolve this?
    Thanks!

    I think it's because you're trying to restore to a computer with a different Owner. I would post that on the Time Machine forum.
    Regards
    TD

  • Time Machine from Leopard to Snow Leopard

    I made a backup of my Leopard installation in Time Machine before upgrading to Snow Leopard.
    I successfully upgrade to Snow Leopard using the equivalent of Erase and Install (disk utility/erase/partition/install) and instead of running Migration Assistant, I opened my Time Machine disk and selectively copied my documents, music and videos to the appropriate folders on Snow Leopard.
    Now, the question is if I set Time Machine on SL to backup to the same disk, will I be able to restore a file to the Leopard version of the Time Machine or only the Snow Leopard version?
    In other words, will I lose all my previous Time Machine backups if I choose the same disk? If so, if I move the "latest" folder from Time Machine to a separate location, will I be able to restore from that copy?

    rpmm wrote:
    Yes I meant "from".
    For the second part what I wanted to do is just copy the last version to a separate drive and use that to possibly pull files from that location if needed. And then just reformat the current TM drive and start with the first backup from SL. Is that not a good idea?
    Not do-able. TM uses a very complex structure for it's backups, including multiple "hard links" at both the file and folder level. You cannot copy them with the Finder.
    What you can do, however, is restore your entire system to that separate drive, from the last Leopard backup, via the instructions in item #14 of the Frequently Asked Questions *User Tip.* Of course, select that external as the destination, not your internal HD. Once it's done, boot from the external and use some of the apps to be sure everything's there before erasing the TM drive.
    The reason I did erase and install was I wanted a clean start, not having all of the apps I had, not having all the extra files I had, etc.

  • Time machine after migration to new mac - problem

    After migrating all of the data from a MacBook Pro to a new iMac 27, I discovered a glitch in the Time Machine backup. I kept getting error messages that Time Machine could not back up 560 gigs but my new machine had only 160 gigs on the hard drive for backup. After discussions with the hard drive manufacturer, and an Apple representative, I read on the forum about backing up multiple hard drives. This gave me an idea, and sure enough, I have two additional hard drives daisy chained to the backup hard drive. Apparently Time Machine was also trying to back up the two additional hard drives (which I use for additional backups). After excluding those two extra hard drives in system prefs under Time Machine options, the problem went away. Now for the first time in a few years, Time Machine is backing up only my primary computer.

    Sorry, I was posting this for anyone who had a similar problem. I solved my own question - dufus as I was - and posted this for the edification of others.

  • Linking previous Time Machine Backup to a new Mac OS X Reinstall

    Hi guys,
    Several recurring problems prompted me to reinstall Mac OS X Leopard 10.5. Beforehand, I had made a copy/clone of my entire Macintosh HD onto an external hard drive. After the reinstallation, I selectively copied specific folders back to my fresh installation.
    On my previous installation, I have had Time Machine running for several months. Trouble is, when I connect the external hard drive which holds the Time Machine backups, the Mac does not recognize it.
    I wish to have my new reinstalled Mac back up to this same Time Machine backup. I have copied all of my documents and applications back onto my new installation. I wish to browse previous backups of the files I had made.
    Correct me if I am wrong, but I believe if I choose my old Time Machine hard drive as my Time Machine backup disk in my new installation, Time Machine simply starts an entirely new backup and ignores the old Time Machine backups made from my previous installation.
    I would appreciate any help you guys could provide.
    Many thanks.

    I had that problem and a more challenging one as well - don't feel bad, mine was caused by the Apple geniuses at my local Apple store doing the same backup and reinstall OS thing.
    One thing to be sure of - go to the "SHARING" pane in System Preferences, and be sure that there is a name for your computer in the appropriate box - AND that the name is the same one you were using before your re-install. Mine had been changed, and when I fixed that, TM recognized the TimeCapsule drive. However - another more difficult problem persists. Here's a message I posted on another thread dealing with the "other" problem: TM won't show the backups made prior to my reinstall (except under special circumstances, noted in the message).
    have an almost identical problem. yesterday I picked up my MacBookPro from the Geniuses at my local Apple retail store. In order to fix a problem with QuickTime, they ported all my files to a backup disk, reformatted my HD, installed a clean copy of OS X 10.5, upgraded it to the current version, then copied my files back to my computer's HD. They messed up my password; somehow made many of my applications vanish (I've mostly fixed those problems now) AND I can no longer access the backup files saved prior to their "help".
    One wrinkle - I can see all of the backups in the TimeMachine window if I am at the level of my hard drive, OR clicked on the applications folder. If I select any other subfolders, the pre-"help" backup files gray out and cannot be used. If I move to a pre-"help" backup file while at the HD level, all but the applications folder are grayed out and non-responsive to clicks
    I ran DiskUtility - repair permissions - and while it found a huge number of things to fix, this did nothing for my Time Machine problem.

Maybe you are looking for