Trying to track down network problem

I'm trying to decide if this is trouble with my mac or my router, so I figured I'd see if anyone here has experienced this.
Periodically my wireless signal is dying. It only does it, however, when I'm connecting to it with my Mac Book Pro -- my sister's mini has no problem. It does the router in pretty well, requiring reboot.
Anyone else seen this? I'd have guessed it was a router problem, if it wasn't for the mini not killing the router.

Uzuri,
What brand of router do you have? I had a dying Belkin router that exhibited the same symptoms, but it was a G4 iBook that would take it down every few days. I thought it was the computer until other problems occurred. At the end, the router was cutting my internet throughput in half. I replaced the router, and have now gone 2 weeks without losing a wireless signal on three computers and 2 iPhones, and no need to reboot the router at all.
Does you MBP have problems with routers in other locations, such as at work, school, or coffee shops? If not, I would venture a guess that the router is going.

Similar Messages

My macbook pro is crashing any clues on how to track down the problem?

my macbook pro is crashing any clues on how to track down the problem?
I'm running OS X 10.9.5 on a Late 2008 Macbook Pro... 8GB of memory... I've swapped the original drive for an SSD.
here is a problem report on one of the crashes... they always look just like this:
Mon Oct 6 17:53:40 2014
panic(cpu 0 caller 0xffffff80018dc43e): Kernel trap at 0xffffff7f82fe26e2, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80cdde2008, CR3: 0x000000004785e000, CR4: 0x0000000000000660
RAX: 0x0000000000000039, RBX: 0x0000000000000059, RCX: 0x0200000002400009, RDX: 0x7fffffffffffffff
RSP: 0xffffff80fdb8b820, RBP: 0xffffff80fdb8b860, RSI: 0x0000000000000059, RDI: 0xffffff80cdde2008
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80fdb8b380, R11: 0xffffff7f81efab4c
R12: 0xffffff80cdde2008, R13: 0xffffff802de1d008, R14: 0x0000000000000059, R15: 0xffffff80cdde2008
RFL: 0x0000000000010282, RIP: 0xffffff7f82fe26e2, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80cdde2008, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80fdb8b4b0 : 0xffffff8001822f79
0xffffff80fdb8b530 : 0xffffff80018dc43e
0xffffff80fdb8b700 : 0xffffff80018f3976
0xffffff80fdb8b720 : 0xffffff7f82fe26e2
0xffffff80fdb8b860 : 0xffffff7f82fe3cbf
0xffffff80fdb8b970 : 0xffffff7f82fe3ff2
0xffffff80fdb8b9e0 : 0xffffff7f82fe4256
0xffffff80fdb8ba60 : 0xffffff7f82ff53d7
0xffffff80fdb8baa0 : 0xffffff7f82fef706
0xffffff80fdb8bae0 : 0xffffff80019fabd6
0xffffff80fdb8bb10 : 0xffffff80019fb38e
0xffffff80fdb8bb30 : 0xffffff80019de87a
0xffffff80fdb8bc80 : 0xffffff8001b82cc3
0xffffff80fdb8bcd0 : 0xffffff8001b7c076
0xffffff80fdb8bd80 : 0xffffff80019fabd6
0xffffff80fdb8bdb0 : 0xffffff80019fb38e
0xffffff80fdb8bdd0 : 0xffffff80019de87a
0xffffff80fdb8bf20 : 0xffffff80019e602a
0xffffff80fdb8bf50 : 0xffffff8001c40c63
0xffffff80fdb8bfb0 : 0xffffff80018f4176
      Kernel Extensions in backtrace:
         com.apple.filesystems.afpfs(11.1)[DCC45CDD-E950-364F-8221-1A914106BC59]@0xfffff f7f82fd7000->0xffffff7f83025fff
            dependency: com.apple.security.SecureRemotePassword(1.0)[BC0BAB92-C8C9-3959-AA42-272AF578DF D9]@0xffffff7f82fc6000
BSD process name corresponding to current thread: mds
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x0000000001600000
Kernel text base: 0xffffff8001800000
System model name: MacBookPro5,1 (Mac-F42D86A9)
System uptime in nanoseconds: 13782929543220
last loaded kext at 732159785634: com.apple.filesystems.smbfs    2.0.3 (addr 0xffffff7f83026000, size 335872)
last unloaded kext at 315936860456: com.apple.filesystems.msdosfs    1.9 (addr 0xffffff7f82fb9000, size 57344)
loaded kexts:
tc.tctechnologies.driver.Saffire    8028
com.iospirit.driver.rbiokithelper    1.8.0
com.squirrels.airparrot.framebuffer    3
com.Logitech.Unifying.HID Driver    1.3.1
com.squirrels.driver.AirParrotSpeakers    1.8
com.Logitech.Control Center.HID Driver    3.9.1
com.apple.filesystems.smbfs    2.0.3
com.apple.filesystems.afpfs    11.1
com.apple.nke.asp-tcp    8.0.1
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.2.7f3
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AGPM    100.14.34
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHWAccess    1
com.apple.GeForceTesla    8.2.4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.7f3
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.AppleMuxControl    3.6.22
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleLPC    1.7.0
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.BootCache    35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.iokit.SCSITaskUserClient    3.6.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBOHCI    656.4.1
com.apple.nvenet    2.0.21
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.security.quarantine    3
com.apple.nke.applicationfirewall    153
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.security.SecureRemotePassword    1.0
com.apple.kext.triggers    1.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IOSerialFamily    10.0.7
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.nvidia.classic.NVDANV50HalTesla    8.2.4
com.apple.nvidia.classic.NVDAResmanTesla    8.2.4
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.7f3
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleGraphicsControl    3.6.22
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.IOBluetoothHIDDriver    4.2.7f3
com.apple.iokit.IOBluetoothFamily    4.2.7f3
com.apple.driver.AppleUSBMultitouch    240.10
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.7
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.7
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IOUSBFamily    686.4.1
com.apple.iokit.IONetworkingFamily    3.2
com.apple.driver.NVSMU    2.2.9
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    7
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOReportFamily    23
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.41f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x85F7, 0x483634353155373946373036364700000000
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x85F7, 0x483634353155373946373036364700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: OWC Mercury Electra 3G SSD, 480.1 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: USB2.0 Hub
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: USB Receiver
Thunderbolt Bus:

These may be your problem candidates:
Uninstall them and then reinstall in a systematic manner and see if the MBP crashes again. If and when it does, then that is the troublemaker.
Ciao.

Trying to track down process bound to port ucp/513

A security audit has detected one of our Solaris 8 servers(Generic_117350-38) has udp port 513 open. I've verified this using nmap and can even see it in netstat output, but can't track down which process is the culprit.
# netstat -an
UDP: IPv4
   Local Address         Remote Address     State
<snip>
      *.32775                               Idle
      *.513                                 Idle
<snip>
# nmap -n -sU -p 513 10.65.11.228
Starting nmap 3.93 ( http://www.insecure.org/nmap/ ) at 2006-06-30 10:48 NZST
Interesting ports on 10.65.11.228:
PORT    STATE         SERVICE
513/udp open|filtered who
MAC Address: 08:00:20:EF:88:A4 (SUN Microsystems)
Nmap finished: 1 IP address (1 host up) scanned in 13.176 secondslsof shows only rlogin stuff on tcp/513:
inetd       556     root   16u IPv6 0x30026f653e8        0t0       TCP *:513 (LISTEN)
in.rlogin 18394     root    0u IPv4 0x3002785fcd8        0t2       TCP aklxd051-pub:513->aklxp061-pub.airnz.co.nz:729 (ESTABLISHED)
in.rlogin 18394     root    1u IPv4 0x3002785fcd8        0t2       TCP aklxd051-pub:513->aklxp061-pub.airnz.co.nz:729 (ESTABLISHED)
in.rlogin 18394     root    2u IPv4 0x3002785fcd8        0t2       TCP aklxd051-pub:513->aklxp061-pub.airnz.co.nz:729 (ESTABLISHED)
in.rlogin 24139     root    0u IPv4 0x300557e3830        0t2       TCP aklxd051-pub:513->aklxd041-pub.airnz.co.nz:902 (ESTABLISHED)
in.rlogin 24139     root    1u IPv4 0x300557e3830        0t2       TCP aklxd051-pub:513->aklxd041-pub.airnz.co.nz:902 (ESTABLISHED)
in.rlogin 24139     root    2u IPv4 0x300557e3830        0t2       TCP aklxd051-pub:513->aklxd041-pub.airnz.co.nz:902 (ESTABLISHED)
rlogin    28865   oracle    5u IPv4 0x300aaf8ef40   0t167482       TCP aklxd051-pub:975->aklxd041-pub.airnz.co.nz:513 (ESTABLISHED)
rlogin    28870   oracle    5u IPv4 0x300aaf8ef40   0t167482       TCP aklxd051-pub:975->aklxd041-pub.airnz.co.nz:513 (ESTABLISHED)All servers have port udp/513 disabled by having the whod line commented out of /etc/services and /etc/inet/inetd.conf.
I've even stopped inetd temporarily and both nmap and netstat still show udp/513 as being idle/open.
All other servers show udp/513 as being closed and I can't find any difference on this one server.
Any help appreciated!

Hi,
Just to give you another angle, use the crash command to monitor the kernel memory caches. Gather output from this one every 12 or 24 hours so you can see a 'real' growth. Remember it is normal for these to grow somewhat, just not to the point that they eat up all system memory.
# crash
kmastatIf you notice a specific cache growing then you can use the kmausers command to see whats allocating into that cache:
Eg.
kmausers kmem_alloc_48HOWEVER before you can use kmausers you will have to have kmem_flags enabled. To do this add the following line to /etc/system and reboot:
Solaris 2.6 and before:
set kmem_flags=0x1f
Solaris 7 and above:
set kmem_flags=0x3f
Regards,
Ben Humphreys
Sun Australia - Solution Centre

Tracking down a problem....suggestions?

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0    Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I'm still fighting this huge insert problem. Making progress, but new problems.
The errors coming back from my latest are telling me that I can't insert a null into a column.
I made changes to the insert file so that it prompts a sequenced tag before each insert for the log.
I've gone to a TON of these 'failing' lines, and they are all correct...they all have the not null column filled.
Any further suggestions on what could be happening?
I know someone is going to ask for the data...
So here is the table structure:
ALTER TABLE FS_NRIS_NVUM.NRN_STRATA
DROP PRIMARY KEY CASCADE;
DROP TABLE FS_NRIS_NVUM.NRN_STRATA CASCADE CONSTRAINTS;
CREATE TABLE FS_NRIS_NVUM.NRN_STRATA
STRATA_CN    VARCHAR2(40 BYTE)                DEFAULT sys_guid()            NOT NULL,
SITE_CN_FK   VARCHAR2(40 BYTE)                NOT NULL,
STARTDATE    DATE                             NOT NULL,
ENDDATE      DATE                             NOT NULL,
MON          VARCHAR2(1 BYTE),
TUES         VARCHAR2(1 BYTE),
WED          VARCHAR2(1 BYTE),
THUR         VARCHAR2(1 BYTE),
FRI          VARCHAR2(1 BYTE),
SAT          VARCHAR2(1 BYTE),
SUN          VARCHAR2(1 BYTE),
PLUSHOL      VARCHAR2(1 BYTE),
COMMENTS     VARCHAR2(4000 BYTE),
USERNAME     VARCHAR2(50 BYTE),
C            NUMBER(6)                        NOT NULL,
N            NUMBER(6)                        NOT NULL,
L            NUMBER(6)                        NOT NULL,
M            NUMBER(6)                        NOT NULL,
H            NUMBER(6)                        NOT NULL,
V            NUMBER(6)                        NOT NULL,
FINAL        VARCHAR2(1 BYTE)                 DEFAULT 'N'                   NOT NULL,
LAST_UPDATE TIMESTAMP(6) WITH TIME ZONE      DEFAULT systimestamp          NOT NULL,
VPDUNIT_ID   VARCHAR2(10 BYTE)                NOT NULL
NOCOMPRESS
TABLESPACE USERS
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
LOGGING
PARTITION BY HASH (SITE_CN_FK)
PARTITION P01
    TABLESPACE USERS,
PARTITION P02
    TABLESPACE USERS,
PARTITION P03
    TABLESPACE USERS,
PARTITION P04
    TABLESPACE USERS,
PARTITION P05
    TABLESPACE USERS,
PARTITION P06
    TABLESPACE USERS,
PARTITION P07
    TABLESPACE USERS,
PARTITION P08
    TABLESPACE USERS
NOCACHE
NOPARALLEL
MONITORING
ENABLE ROW MOVEMENT;
CREATE UNIQUE INDEX FS_NRIS_NVUM.NRN_STRATA_PK ON FS_NRIS_NVUM.NRN_STRATA
(STRATA_CN)
LOGGING
TABLESPACE INDEXES
PCTFREE    10
INITRANS   2
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
NOPARALLEL;
CREATE INDEX FS_NRIS_NVUM.NRN_STRATA_SITE_X1 ON FS_NRIS_NVUM.NRN_STRATA
(SITE_CN_FK)
TABLESPACE INDEXES
PCTFREE    10
INITRANS   2
MAXTRANS   255
STORAGE    (
              MINEXTENTS       1
              MAXEXTENTS       UNLIMITED
              PCTINCREASE      0
              BUFFER_POOL      DEFAULT
LOGGING
LOCAL (
PARTITION P01
    TABLESPACE INDEXES,
PARTITION P02
    TABLESPACE INDEXES,
PARTITION P03
    TABLESPACE INDEXES,
PARTITION P04
    TABLESPACE INDEXES,
PARTITION P05
    TABLESPACE INDEXES,
PARTITION P06
    TABLESPACE INDEXES,
PARTITION P07
    TABLESPACE INDEXES,
PARTITION P08
    TABLESPACE INDEXES
NOPARALLEL
COMPRESS 1;
CREATE OR REPLACE TRIGGER FS_NRIS_NVUM.NRN_TIUD_STRATA
BEFORE INSERT OR UPDATE OR DELETE
ON FS_NRIS_NVUM.NRN_STRATA
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
DECLARE
BEGIN
IF INSERTING THEN
    IF :new.strata_cn is null
    THEN
       :new.strata_cn := sys_guid();
    END IF;
    IF :new.last_update is null
    THEN
       :new.last_update := systimestamp;
    END IF;
    IF :new.username is null
    THEN
       :new.username := nvl(sys_context('NRN_VPD_CTX','LOGON_NAME'),
                            sys_context('USERENV','SESSION_USER'));
    END IF;
    nrn_strata_util.Get_Strata_Days_Assigned
             (:new.startdate,:new.enddate
             ,:new.mon,:new.tues,:new.wed,:new.thur,:new.fri,:new.sat,:new.sun
             ,:new.c,:new.n,:new.l,:new.m,:new.h,:new.v);
    nrn_utils.audit_table
             (:new.vpdunit_id||','||:new.strata_cn||','||:new.site_cn_fk
             ,'NRN_STRATA', 'INSERT');
ELSIF UPDATING THEN
    IF :new.last_update is null OR
       :new.last_update = :old.last_update
    THEN
       :new.last_update := systimestamp;
    END IF;
    IF :new.username is null OR
       :new.username = :old.username
    THEN
       :new.username := nvl(sys_context('NRN_VPD_CTX','LOGON_NAME'),
                            sys_context('USERENV','SESSION_USER'));
    END IF;
    nrn_strata_util.Get_Strata_Days_Assigned
          (:new.startdate,:new.enddate
          ,:new.mon,:new.tues,:new.wed,:new.thur,:new.fri,:new.sat,:new.sun
          ,:new.c,:new.n,:new.l,:new.m,:new.h,:new.v);
    nrn_utils.audit_table
             (:new.vpdunit_id||','||:new.strata_cn||','||:new.site_cn_fk
             ,'NRN_STRATA', 'UPDATE');
ELSE -- deleting
    nrn_utils.audit_table
             (:old.vpdunit_id||','||:old.strata_cn||','||:old.site_cn_fk
             ,'NRN_STRATA', 'DELETE');
END IF;
END;
CREATE OR REPLACE TRIGGER FS_NRIS_NVUM.NRN_VPD_STRATA
BEFORE INSERT OR UPDATE
ON FS_NRIS_NVUM.NRN_STRATA
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
DECLARE
BEGIN
IF INSERTING THEN
    :new.vpdunit_id := nrn_vpd.get_vpd_for_child
                       (:new.site_cn_fk,'NRN_SITES','SITE_CN');
ELSE
    IF NOT nrn_vpd.gv_is_superuser
    THEN
       -- not allowed to change this field
       :new.vpdunit_id   := :old.vpdunit_id;
    END IF;
END IF;
END;
CREATE OR REPLACE PUBLIC SYNONYM NRN_STRATA FOR FS_NRIS_NVUM.NRN_STRATA;
BEGIN
SYS.DBMS_RLS.DROP_POLICY (
    object_schema    => 'FS_NRIS_NVUM'
    ,object_name     => 'NRN_STRATA'
    ,policy_name     => 'NRN_STRATA_PDIU');
END;
BEGIN
SYS.DBMS_RLS.ADD_POLICY     (
    object_schema          => 'FS_NRIS_NVUM'
    ,object_name           => 'NRN_STRATA'
    ,policy_name           => 'NRN_STRATA_PDIU'
    ,function_schema       => 'FS_NRIS_NVUM'
    ,policy_function       => 'NRN_VPD.GET_PREDICATE'
    ,statement_types       => 'INSERT,UPDATE,DELETE'
    ,policy_type           => dbms_rls.shared_context_sensitive
    ,long_predicate        => FALSE
    ,update_check          => TRUE
    ,static_policy         => FALSE
    ,enable                => TRUE );
END;
ALTER TABLE FS_NRIS_NVUM.NRN_STRATA ADD (
CONSTRAINT NRN_STRATA_FINAL_CK
CHECK (FINAL IN ('N','Y'))
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_PK
PRIMARY KEY
(STRATA_CN)
USING INDEX FS_NRIS_NVUM.NRN_STRATA_PK
ENABLE VALIDATE);
ALTER TABLE FS_NRIS_NVUM.NRN_STRATA ADD (
CONSTRAINT NRN_STRATA_FRI_FK
FOREIGN KEY (FRI)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_HOL_FK
FOREIGN KEY (PLUSHOL)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_MON_FK
FOREIGN KEY (MON)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_SAT_FK
FOREIGN KEY (SAT)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_SITE_FK
FOREIGN KEY (SITE_CN_FK)
REFERENCES FS_NRIS_NVUM.NRN_SITES (SITE_CN)
ON DELETE CASCADE
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_SUN_FK
FOREIGN KEY (SUN)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_THU_FK
FOREIGN KEY (THUR)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_TUE_FK
FOREIGN KEY (TUES)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE,
CONSTRAINT NRN_STRATA_WED_FK
FOREIGN KEY (WED)
REFERENCES FS_NRIS_NVUM.NRN_USE_STRATA (USE_STRATA)
ENABLE VALIDATE);
GRANT DELETE, INSERT, UPDATE ON FS_NRIS_NVUM.NRN_STRATA TO NRN_EDITOR;
GRANT SELECT ON FS_NRIS_NVUM.NRN_STRATA TO PUBLIC WITH GRANT OPTION;
And here are a bunch of examples of my inserts that fall around the count of the errors....
prompt Inserting 614
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A603D9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('11/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('11/30/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 13,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 615
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A605D9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('12/01/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('01/18/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'M', 'TFRASER', 0, 0, 42,
    7, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 616
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A609D9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('01/19/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('01/20/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'M',
    'M', 'TFRASER', 0, 0, 0,
    2, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 617
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A60BD9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('01/21/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('02/15/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'M', 'TFRASER', 0, 0, 23,
    3, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 618
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A60DD9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('02/16/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('02/17/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'M',
    'M', 'TFRASER', 0, 0, 0,
    2, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 619
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A60FD9C4E040DDA51E2A4F82', 'D58BE055A5FFD9C4E040DDA51E2A4F82', TO_DATE('02/18/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('02/28/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'M', 'TFRASER', 0, 0, 10,
    1, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 620
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('f3d7899a-f491-4afd-a19a-c1c80e734022', 'D58BE055A165D9C4E040DDA51E2A4F82', TO_DATE('07/13/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('08/30/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 49,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:02.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 621
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('4f472ab2-5e4d-4d18-8176-1a938a6c990c', '16eb0fe0-36ac-49ea-a21c-a10e5e88020c', TO_DATE('10/01/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('11/10/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 41,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 622
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('d9911182-05d6-4765-8fe7-cd6a27cea7ae', '16eb0fe0-36ac-49ea-a21c-a10e5e88020c', TO_DATE('05/18/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/30/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'N',
    'N', 'N', 'N', 'N', 'N',
    'N', 'TFRASER', 0, 136, 0,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 623
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('f0319cf3-0a7b-4487-b048-a5b1fd63f08f', '16eb0fe0-36ac-49ea-a21c-a10e5e88020c', TO_DATE('11/11/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('03/31/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'N',
    'N', 'N', 'N', 'N', 'N',
    'N', 'TFRASER', 0, 141, 0,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 624
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('f509c87e-0a58-4d5f-a514-0619be341fe0', '16eb0fe0-36ac-49ea-a21c-a10e5e88020c', TO_DATE('04/01/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/17/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 47,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 625
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A05DD9C4E040DDA51E2A4F82', 'D58BE055A05BD9C4E040DDA51E2A4F82', TO_DATE('10/01/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('06/16/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 259,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 626
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A05FD9C4E040DDA51E2A4F82', 'D58BE055A05BD9C4E040DDA51E2A4F82', TO_DATE('06/17/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/06/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'H',
    'H', 'TFRASER', 0, 0, 59,
    0, 23, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 627
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A061D9C4E040DDA51E2A4F82', 'D58BE055A05BD9C4E040DDA51E2A4F82', TO_DATE('09/07/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('09/30/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 24,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 628
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A49FD9C4E040DDA51E2A4F82', 'D58BE055A49DD9C4E040DDA51E2A4F82', TO_DATE('10/01/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('11/15/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 46,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 629
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A4A1D9C4E040DDA51E2A4F82', 'D58BE055A49DD9C4E040DDA51E2A4F82', TO_DATE('11/16/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('04/30/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'N',
    'N', 'N', 'N', 'N', 'N',
    'N', 'TFRASER', 0, 166, 0,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
prompt Inserting 630
Insert into FS_NRIS_NVUM.NRN_STRATA
   (STRATA_CN, SITE_CN_FK, STARTDATE, ENDDATE, MON,
    TUES, WED, THUR, FRI, SAT,
    SUN, USERNAME, C, N, L,
    M, H, V, FINAL, LAST_UPDATE,
    VPDUNIT_ID)
Values
   ('D58BE055A4A3D9C4E040DDA51E2A4F82', 'D58BE055A49DD9C4E040DDA51E2A4F82', TO_DATE('05/01/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/09/2014 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'L',
    'L', 'L', 'L', 'L', 'L',
    'L', 'TFRASER', 0, 0, 9,
    0, 0, 0, 'Y', TO_TIMESTAMP_TZ('1/8/2013 2:44:03.000000 AM -06:00','fmMMfm/fmDDfm/YYYY fmHH12fm:MI:SS.FF AM TZH:TZM'),
    '0402');
I'm looking at the code and nothing is sticking out to me.
THanks.

The error I'm seeing, should have posted that too...sorry...specifically states not being able to insert null...
example:
Inserting 621
Insert into FS_NRIS_NVUM.NRN_STRATA
ERROR at line 1:
ORA-01400: cannot insert NULL into ("FS_NRIS_NVUM"."NRN_STRATA"."VPDUNIT_ID")
The triggers have been established and functional for YEARS with zero changes.
I don't get how that could be culprit.
Have you been using EXACTLY the same DB version and patch level (11.2.0.3.0) for years 'with zero changes'?
That code you posted has an architectural flaw that can be an 'accident waiting to happen'.
You posted TWO DIFFERENT triggers that fire on INSERT FOR EACH ROW. Why? In some aspects they conflict with each other:
CREATE OR REPLACE TRIGGER FS_NRIS_NVUM.NRN_TIUD_STRATA
BEFORE INSERT OR UPDATE OR DELETE
ON FS_NRIS_NVUM.NRN_STRATA
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
    nrn_utils.audit_table
             (:new.vpdunit_id||','||:new.strata_cn||','||:new.site_cn_fk
             ,'NRN_STRATA', 'INSERT');
CREATE OR REPLACE TRIGGER FS_NRIS_NVUM.NRN_VPD_STRATA
BEFORE INSERT OR UPDATE
ON FS_NRIS_NVUM.NRN_STRATA
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
DECLARE
BEGIN
IF INSERTING THEN
    :new.vpdunit_id := nrn_vpd.get_vpd_for_child
                       (:new.site_cn_fk,'NRN_SITES','SITE_CN');
ELSE
1. Which of those triggers will fire first?
2. What might happen if the firing order changes?
If the first trigger fires first it tries to use ':new.vpdunit_id||' and at that point it will either be NULL (if the INSERT did not include a value) or will have some unknown value'.
Then the second trigger fires and ALWAYS assigns a value that is the result of a function call ('get_vpd_for_child'). That function could return NULL or it could return a value of some sort. In either case that value will REPLACE the value used in any INSERT statement (such as ALL of those insert statements you posted).
So 'for years' you have potentially been calling 'audit_table' with values that are NOT the values actually being inserted.
In 11g you can use a COMPOUND trigger to control the firing order. See the description in this Oracle 'New Features' article:
http://www.oracle.com/technetwork/articles/sql/11g-efficient-coding-093640.html
In particular see the section 'Ordered Execution in Triggers' section:
Ordered Execution in Triggers
Since Oracle8, you have had the ability to define multiple triggers of the same type on one table—e.g., two triggers both after each row on insert on the same table. The type of triggers determine ordering of the execution: before statement, before row, after statement, and after row. However, if you have two after-row triggers—T1 and T2—which one will fire first?
The execution of triggers of the same type is somewhat random or at least not guaranteed to follow a pattern. Does that pose a problem?
See that last paragraph? Something as simple as a new patch release can easily change things like the order of firing.
Your INSERT statements are providing a value for 'vpdunit_id'. Why? That second trigger is written to ALWAYS generate a value so why are you providing one in the INSERT statement? Trigger1 may be logging the one you provide even though trigger2 assigns a new and different value.
I would investigate that function further:
nrn_vpd.get_vpd_for_child
                       (:new.site_cn_fk,'NRN_SITES','SITE_CN');

Trying to track down and verify an ip address

Ok when i have skype open i notice that it polls this IP address
74.57.165.79 modemcable079.165-57-74.mc.videotron.ca.
which is a videotron ip in montreal does that jive as a skype location?

A free app called Fing will tell you what devices are connected to your network and what IP addresses they are using. Rebooting/resetting each of your devices will probably resolve things.
tt2

Trying to track down Activation Code

A gentleman in our department at work has been using Adobe Premiere Pro since March of 2009. He retired recently and the license was moved over to someone else in the department. The system has been working fine since January, however there has been an upgrade to the PC in the office the software was loaded on, and we need to re install and activate. The problem is no one can find the disk, box it came in, or any emails that would have the activation code. Is there anyway to find out this information?

Hello,
first of all you could have a look there: https://www.adobe.com/account.html >>> see My productsView all >>> These registered products are associated with your Adobe ID. >>> Name >>> Serial number
If not successful use http://helpx.adobe.com/x-productkb/global/find-serial-number.html >>> I lost my serial number >> see comment
Another option would be that you use Contact Customer Care = http://helpx.adobe.com/contact.html, by clicking through the headlines.
Good luck!
Hans-Günter

Trying to track down an apparent kenel memory leak

We are running an application compiled against a third party library and seeing strange memory usage on a Solaris 5.6 box. Program was compiled with the SWPRO 5.0 compiler.
Shortly after boot, freemem (sar -r) nearly disappears:
00:00:01 freemem freeswap
02:07:01 unix restarts
03:00:00 26004 1433872
04:00:00 23040 1430286
05:00:01 19516 1430113
06:00:00 16519 1430008
07:00:00 14335 1429783
08:00:01 12459 1429636
09:00:00 8919 1429468
10:00:00 4188 1429386
11:00:01 694 1429392
It then seems to stay around this level, with freswap dropping about 5000 in 12 hours.
Also, kernel memory allocated continues to rise (sar -k) over several days:
00:00:01 sml_mem alloc fail lg_mem alloc fail 10:05:22 unix restarts
10:20:00 1433600 1151220 0 5021696 4458912 0
23:00:00 1654784 1351760 0 5185536 4616864 0
23:00:00 1900544 1531544 0 7348224 6877536 0
23:00:01 2072576 1684888 0 8183808 7801240 0
23:00:00 2252800 1887580 0 8544256 8157064 0
23:00:00 4849664 4518304 0 8478720 8211544 0
23:00:00 4833280 4469868 0 8511488 8229592 0
However, ps -el does not show any particular process eating up memory.
Eventually the system appears to run out of swap and locks up. I'm at a loss as to where to go next to try to determine what is causing this memory usage. Any ideas?

Hi,
Just to give you another angle, use the crash command to monitor the kernel memory caches. Gather output from this one every 12 or 24 hours so you can see a 'real' growth. Remember it is normal for these to grow somewhat, just not to the point that they eat up all system memory.
# crash
kmastatIf you notice a specific cache growing then you can use the kmausers command to see whats allocating into that cache:
Eg.
kmausers kmem_alloc_48HOWEVER before you can use kmausers you will have to have kmem_flags enabled. To do this add the following line to /etc/system and reboot:
Solaris 2.6 and before:
set kmem_flags=0x1f
Solaris 7 and above:
set kmem_flags=0x3f
Regards,
Ben Humphreys
Sun Australia - Solution Centre

Help needed to track down Problem in tiger with Pioneer DVR-110D

ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
PatchedAppleNVRAM:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
kext Version: 3.0
Load Address: 0x4db000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
OpenPMUNVRAMController:
Version: 2.0
Last Modified: 8/9/05 6:08 PM
Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
kext Version: 2.0
Load Address: 0x63a000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
Integrity: Unknown
GossamerDeviceTreeUpdater:
Version: 3.0
Last Modified: 8/9/05 6:07 PM
Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
kext Version: 3.0
Load Address: 0x63d000
Valid: Yes
Authentic: Yes
Dependencies: Incomplete
Dependency Errors:
com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
Integrity: Unknown
that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

Is there an app that can track your network activity?

My daughter's iPhone has starting chewing up data like water. (iPhone 5) Here are the symptoms:
--data useage has gone from 2-3 gigs/month to 20+ gigs, .8gb/day
--the battery will sometimes lose 40% of its power overnight and even 20% in an hour when she isn't using it, and it will get very hot
She has tried changing various settings in her apps to cut down on useage of the cell network. (She is in L.A. and is on AT&T where coverate is spotty.) She discovered that she was downloading the entire Spotify catalogue so turned that feature off but it didn't help. We think somethine else is trying to upload or download in the background but can't figure out what it is without systematically disabling every app one at a time. So short of that, is there an app that would help us track down this problem? I called AT&T and they weren't any help, just wanted to upgrade me to a higher plan.

another symptom--after doing nothing but some light texting, she sent 30 mb of data in an hour. That strikes me as being way out of line.

How to track down php service fault

I have a small FlashBuilder4 project that runs fine on my local computer under Apache, PHP and MySQL.The first thing it does is populate a DataGrid with data from a MySQL table (the grid's creationcomplete event triggers a PHP service call and has its dataprovider hooked to the callresponder's lastresult property).
As is often the case, I'm having trouble deploying the project to a remote, hosted server. I have uploaded the Zend framework, the release build, transferred my tables to the remote server, set the paths, etc. After several initial problems I believe I've got the ini file and everything else set up correctly (if I browse to my gateway.php and open it in notepad I get "Zend endpoint" with no errors). I have entered the credentials in each php service file. However, when I browse to the html wrapper page the grid displays fine but the phpservice call is apparently generating a fault. Unfortunately, there is no error information returned by the fault; i.e. the Alert box is blank.
Can anyone suggest a methodical way of trying to track down what is going on?
Thanks in advance.

You cannot. Sorry. You could try calling it via facetime, if you have facetime, and listen for the ringing.
BTW, typing in all caps indicates shouting, is considered rude and is difficult to read.
Many simply do not read such posts.

How can I track down what is filling my HD but clears with a restart?

Recently started seeing 12GB of free disk space slowly filling over the day and I'm uncertain how best to track down and remove the cause. Towards the end of the day, I see the "startup disk almost full" error and my computer comes to a crawl. A restart rescues the space, so I'm guessing /tmp or swap?
Anyone have suggestions on starting to track down the problem? Thanks.
Macbook Air
Mountain Lion

mhadjar wrote:
I'd consider using an external drive (flash or mass storage) for the files you use less often to free up disk space. You have a lot of inactive memory and your swap is around 2GB so you aren't too bad there. Obviously launching iPhoto might cause some swapping as well as iTunes.
Was this screenshot with iTunes/iPhoto opened or closed?
I think you meant to ask this question of the OP rather than me.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." Tried suggestions I've seen on the forum.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

Keep trying to send a message and it wont go through i keep getting a message that says network problems cause code :3 what does that mean

keep trying to send a message and it wont go through I keep getting a message pop up that says network problems cause code :3 what does this mean

SMS Error: Cause Code 3, Error Code 2

3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

Trying to track down network problem

Similar Messages

Maybe you are looking for