Trying to turn on the noise canceling for iphone 5c

I am having trouble with my hand free system in my CRV and I was told there is a noise canceling selection in the settings but I am not seeing it. I need to turn this feature on so I can reduce the magnified noise coming through my hands free system. I have an iphone 5c

I'm having a problem with echoing, and see where people suggest turning off Noise Cancellation, but that option does not appear in my Settings menu.  I go to Settings>General>Accessibility> but there is no Phone Noise Cancellation.
Where is it?  Why is it not in my menu?
iphone 5c, ios 8.a.2 (12B440)
Will turning this off stop the echoing I hear of myself when I am talking on a call?

Similar Messages

  • I received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen.  turned off tried to turn on no noise no screen load. thx

    i received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen. i waited for a few minutes to see if it would load - nothing just the lit up screen but nothing loaded - held power button it asked did i really want to turn off - i selected shutdown -turned off and left it off for awhile tried to turn on no noise no screen load. the same lit up screen but nothing loading.  please help thx in advance if anyone can offer some suggestions

    You can get there from here (booting normally); it just may take you a few steps to do it.
    If the disk is almost full and the system won't boot then sometimes it will boot in Safe Mode.
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Empty the trash after it boots.
    Then for hints on how to free disk/SSD storage see https://discussions.apple.com/thread/5872318?tstart=0
    If the Safe Mode boot does not do the trick then you can install OS X on an external hard disk, boot from that, and then delete files.  You can also reach the disk via Target Mode.  A third option is to take it to an Apple store where they can do a network boot and help you remove some files.

  • Track ID keeps opening when watching a movie using the noise cancelling headset

    When I am trying to watch a movie using the noise cancelling headset, the Track ID app keeps opening/starting and tries to identify the "track" I am listening to.  I stop the recording and close the Track ID app down but it immediately opens again and this happens multiple times in a row.  It stops after 10 or so attemtps and seems ok for a while but will do this again 5-10 minutes later.  This also happened when I was listening to a 3rd party app which plays relaxing sounds.  It seems to happen more often when there is loud background noise (on the train and someone opened the window), but Track ID has opened with out me starting it with very littel background noise...  It is very annoying when you are trying to watch a movie or downloaded TV show etc.  

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    If this is only happening when you have a specific accessory attached, please try this: Main Menu > Settings > Apps > Smartconnect > Clear Data.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How can I turn off the auto renewal for Hulu plus?

    How can I turn off the auto renewal for Hulu Plus?  I can not seem to follow the instructions given...I can not launch I tunes and have a menu appear.......
    My special needs son accidentally signed up for this trial offer and I want it cancelled immediately.  I have received an email from them, but can not get it to work and I have been trying for over a week.......feeling frustrated.

    How/where are you trying to stop the subscription ?
    If you are using iTunes on a PC and the drop-down menus aren't showing at the top of iTunes then see if control-B gets them to show, or try alt-S and see if that gets the Store drop-down menu to show. You should also be able to cancel subscriptions by tapping on your id in Settings > iTunes & App Store on your iPod Touch an logging into your account.
    Auto-renewing subscriptions : Manage your auto-renewing subscriptions

  • Noise canceling for listening to music

    Hi there,
    is there any way to use the noise canceling system in the Z30 for listening to music? It is unusually for me that you can connect headphones in two different ways. The headset delivered with the phone does not mute the speakers of the phone when connected. Normal headphones does. Is there a similar possibility to connect earphones with micophones for noise cancelling like seen on the Sony Z2? What can I do? Thanks in advance.

    Noise cancelling has to be done with the earphone or headset itself. The noise cancellation is very phase critical. The receiver (michrophone) that picks up the background noise must be located very close to where the sound is outputting to the speaker device.
    Noise is cancelled by using very precise audio amplification of the ambient sounds or noise, and applying the noise in exact opposte phase and level to the noise that is in the background along with the sound.
    You need a headset with the noise cancelling option, and this should work for you. The good ones are fairly expensive. They don't work 100%, but usually this feature is better than not having it at all.
    Jerry G.

  • How do you turn off the special characters for letters?

    How do you turn off the special characters for letters? Where you hold down the key and it comes up with variations of the letter. For example ï í î ò œ å ß ł û
    It is very annoying when I try to play any online games. Thanks for the help

    Thank you so much It worked Thank you

  • My volume is greyed out when I turn on the Mac, but for some reason it works again when I turn on bluetooth. Nothing in system prefs changes this???

    My volume is greyed out when I turn on the Mac, but for some reason it works again when I turn on bluetooth. Nothing in system prefs changes this??? Its all very random and sometimes I do not have this problem at all or it is fixed again when I restart the Mac.

    please let me know if you figure out how to do correct it because mine has exacly the same problem.

  • Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

    Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

        csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Upgraded both computers in the household and found Lion is too disruptive to workflow.  Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return computer and get upgraded memory to improve performance of existing MacBookPro?

    Upgraded both computers in the household and found Lion is too disruptive to workflow. 
    Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing MacBookPro?  I'm mostly still happy with existing MacBookPro, but Aperture doesn't work, the computer can't handle it.
    Other possibility is setting up virtual machine with Snow Leopard server software on new computer.
    Any opinions on what would allow moving forward with the least hassle and best workflow continuity?

    hi,
    what year and specs does the MBP have

  • How to turn off the authorization checks for a object in infoproviders?

    Hi - how can I turn off the authorization check for an object (ex: 0orgunit) in infoproviders?
    I have 0orgunit as an authorization-relevant object and is used in one of the cubes. When reports are run for this cube, this is causing authorization issues. The object is present in other cubes also but I have to remove or turn off the authorization check of this cube alone. How to do this? Please help.
    Thanks,
    Raj.

    Hi Raj,
    Srinivas, is right , however in BI7 the correct transaction is RSECADMIN and not RSADMIN.
    In BW3.5, use RSSM transaction to do thins.
    OR
    Go to transaction RSECAUTH ---> Choose  the authorization object that has been created for org unit(and has been assigned to the user). Go to change mode. Remove the cube from the dimension 0TCAIPROV
    If you are using old authorization concept in 3.5 or in 7.0
    Go to RSSM. In the checks for infoprovider, enter your infoprovider name. Choose change.Here you will see a checkbox to switch off the authorization.
    Hope this helps you,
    Best regards,
    Sunmit.

  • I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

    I am trying to log into the itunes store for the first time and it asks me to review my account so I do but every time I get to the bit where you fill in your bank details and address it tells me my payment method was declined and that its not valid?

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • How do I turn off the compatibility mode for ITunes.

    I have turned off the compatibility mode for Itues off so there is no tick in the box and yet, even after removing Itunes completely from the PC and reinstalling it, it automatically sets to run in an older version even if the compatibility button has not been ticked...!!!!
    Can anyone suggest why this happens and how can i change it?

    There were no boxes checked in the Compatibility mode tab for either iTunes.exe or QuickTimePlayer.exe and I was still having the issue. RandomBehavior's post was the solution. I’m not real computer savvy so it took me a while to figure out the process. Below is the solution for dummies. It did not require a restart but, I did one and everything was great. No more compatibility popup. :o)
    Left Click on Windows Icon on Bottom Taskbar
    Select: Help and Support
    Search: regedit
    Select: 1. Back up the registry
    Choose: Click to open Registry Editor
    Allow Changes
    Open folders in this order
    HKEYCURRENTUSER
    Software
    Microsoft
    Windows NT
    CurrentVersion
    AppCompatFlags
    Layers
    Mouse over the file c:\Program Files…
    c:\Program Files (x86)\iTunes\iTunes.exe
    Delete this file: c:\Program Files…
    which is c:\Program Files (x86)\iTunes\iTunes.exe

  • HT4993 My I phone 5 makes a loud pulsating noise, that hurts my ears.  I heard it's has something to do with the  noise canceling in the system. Can this be fixed?

    My I phone 5 makes a loud pulsating noise, that hurts my ears, I have heard that it has something to do with the noise canceling system. Can this be fixed?

    See this thread... https://discussions.apple.com/message/19889243#19889243
    And look at More Like This to your right --->

  • Is the noise cancellation mic on my iphone 5s waterproof?

    Is the noise cancellation mic on my iphone 5s waterproof? or can  water enter my iphone through it? and how else can moisture enter my iphone, coz it's really humid over here. Are there any other openings i should be worried about?

    No. There is nothing in an iPhone that's waterproof. If you wish to waterproof it, then buy a case that makes it close to or completely waterproof.
    Try not to exceed these conditions:
    Operating ambient temperature: 32° to 95° F (0° to 35° C)
    Nonoperating temperature: -4° to 113° F (-20° to 45° C)
    Relative humidity: 5% to 95% noncondensing
    Operating altitude: tested up to 10,000 feet (3000 m)

  • Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    Disasble the computer's security software during the download and update.

Maybe you are looking for