Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.

Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce

Similar Messages

How do I make image backgrounds black and white while maintaining color in the foreground objects?

I have a close up close-up image of an orchid with blurred background. I am trying to make the background black and white while maintaining the foreground color on the petals, buds and stems. Any ideas?

Use the Blank & White Brick and either brush the effect onto the background or brush is away from the foreground. "Detect Edges" will help control the edge of the mask.
You might be interested in knowing that you can brush on/away masks of different strengths, and thus produce effects in between 0% and 100%.
Search the forum -- there are several good posts detailing how to create this effect.
Sample search.
Message was edited by: Kirby Krieger -- added sample search.

I have imported a color picture and trying to use the adjustment brush to turn the background black and white and it isn't working. I have Lightroom 5. Any suggestions?

Hello - I have Lightroom 5. I have imported a color photo. I am trying to use the Adjustment Brush to change the background to Black and White and leave a portion of the photo in color. When I begin painting the photo with the Saturation at -100 I don't see any changes to the photo. I push the "O" key and still nothing. I have tried to reset the photo, restarted Lightroom and still nothing. Please help.

Set Flow and Density of the brush to 100
Reduce it where you want the effect to blend.
Bruce

I own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white.

On the iPhone 5s, performing any edit on a black and white photo will render a strong purple tone. This occurs in any app under the current iOS. Sadly, every photo must then be re-edited to restore the original black and white. If others have experienced similar troubles, any feedback would be greatly appreciated.

Hi everyone, I'm the one from the example above posted by @frankensinatra and I can confirm having the same problem.
But I want to add something. The problem is not only related to black and white but to every picture, and it can be worse or not depending on the range of colors involved. Apparently, there is a shift between some RGB value that is going to remove some green producing a magenta look.
I've started contacting some developer about this problem and some of them is trying to understand what's going on.
In my case, the problem came up when I bought the new iPad mini Retina. I didn't have this problem with the previous iPad mini. Same OS for both devices.
The photo you see in the link above is a perfect example of what happens just going from one app to another and saving to the camera roll. In that case, the situation doesn't change if I send that picture from within the app by email, or to another app using the "open in..." feature. It keeps being purple. And the problem can be reproduced all the time.
Have some of you noticed the same?

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?Photoshop Lightroom

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

With green chroma concept, I removed the green background, now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Please help me.

With green chroma concept, I removed the green background. Now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Same like the advertisement clip in the Apple Website. Please help me.

If you want the whole of the project background to be white, you can change the colour in FCP X preferences.
If you just want white for a section or clip, use a custom Generator from the Generators Library and change it to white in the Inspector.
Andy

After turning an image black and white, how can I color in a certain area?

After turning an image black and white, how can I color in a certain area?

How did you change it? Did you make your B&W on a separate layer? If so, just erase the part of the layer you don't want, or add a layer mask and paint with black over the parts you want to hide.
If not, then you can copy/paste the original photo (you will need to press ctrl+A/cmd+A to select all before you can copy) into the new image. From there it depends on the relative proportions of B&W. Arrange the two layers so the one with the most area that you want to keep is on top, and either mask out the rest or just erase it away.
For future reference, an easier way to do this when starting from scratch is to use the smart brush. Choose a black and white conversion style, turn on the inverse checkbox and paint over the part you want in color. The rest of the photo turns black and white, leaving what you paint over in the original colors.

Why does my photoshop keep giving black and white lines when I use my lasso tool?

why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?

I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

Black and white on Lightroom 4 back to color?

I edited a photo in black and white on Lightroom 4 and saved it to a folder on my desktop. I had to then erase the photos from Lightroom to make room for more photos(before I got my external hard drive). My client would like the color version of the black and white photo but I didn't save a color copy. I normally do but somehow I missed this one. Is there any way to strip the photo I have back to its original color? Any advice would be appreciated.

What file type is the photo? DNG? It would be possible. JPG? No way.
Other file types? Describe them.
Is the image on your camera? Would it be possible to restore it?

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form". I can't figure out how to get to the page that you choose which form you want

I never used this program before. I tapped on the "budget form" and decided I'd rather use the "expense form". I can't figure out how to get to the page that you choose which form you want. How would I do that?

Pct,
In the Numbers spreadsheets window where all your documents are shown as icons, tap the Plus Sign.
Choose Create Spreadsheet
Select the template you want to use
Jerry

How to make background Black and White

How can I the background to Black and White.

also known as 'Pleasantville Effect'
Mr Jordan offers advice
https://youtu.be/N1PuVwRCEzM
… but his example is easy, when the subject is the only color in scenery.
His advice doesn't asks for 'extras', so give a try....

How can I turn an image black and white?

I want to edit an image I have inserted into a pages document. I can't see a way to easily change the colouring of the photo to black and white. Using the bars seems to make the colouring look a little odd. Any suggestions?

In Pages v5.2.2, the quickest way to transform a photo to b/w is to select the photo, and on the right panel's Image tab — completely desaturate the image. Tweak the Exposure for tonality adjustments.

How can I turn a picture black and white and keep some objects in color?

I have seen some pictures that are black and white, and a few objects (flowers, dresses, hair bows, etc) were in their original color. I was told you could do it with Photoshop, but I cannot figure out how. Any advice would be greatly appreciated!

The easiest way to do this (and there are lots of ways) is to create a hue/saturation adjustment layer above your base image. In the dialogue box, push the saturation slider all the way to the left. This will make what you see monochrome. Now select a brush and click on the layer mask next to the layer you just created. When you paint on the mask in black, you will block the desaturation effect of the layer and reveal the original color on the layer below. Paint in white to reverse this effect.
Bob Warren

Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.

Similar Messages

Maybe you are looking for