Trying to understand CF side-by-side installations (CF9 and CF11)

I'm testing my upgrade from CF9 to CF11 on the same server. Looks like my old CF9 installation was an enterprise, standard, IIS installation. (if that makes sense to you) My CF11 is an enterprise, production + secure, stand-alone installation. It appears that I had to choose the stand-alone installation with internal web server so it can diferentiate between the two Cold Fusions adn do side-by-side installation. We want to use the internal web server anyhow so we can use the built-in Tomcat server instead of having to install a separate one. Now the question has come up, how do I get all of my web pages that are on IIS into my current ColdFusion. I discovered a document that discusses the Web Server Management. It looks like I can run it now and it will configure my connection between IIS and ColdFusion.
https://wikidocs.adobe.com/wiki/display/coldfusionen/Web+Server+Management
My question is, can this be done while CF9 is still up and running and then it would give me a CF11 ran instance of using the CF webpages so I can test them and get them to work. Someone was thinking that IIS wouldn't be able to figure out which CF administrator to use. Two CF applications cannot use IIS at the same time. If so, how do I get the two systems to run side-by-side using my CF pages, so I can test if anything broke and needs to be changed in the code, and/or test any of the new capabilities in CF11?
Thanks in advance!!

It can be done, but it is not necessarily for the faint of heart. I haven't done it in quite some time. Here are the basics:
Figure out which ports CF 9 is using.
Install CF11 using the built-in web server first (don't connect it to IIS). Make sure CF 11 is not trying to use the same ports as CF 9.
Run the CF9 Web Server Connection Tool. See if you have "all sites" configured. If you do, remove the connector and reinstall individually to the sites you want CF9 to operate. Make sure your sites operate properly before moving on.
If you want to have the same site code run under both CF9 and CF11, you'll need to copy the directory of the CF9 site to a new directory for CF11 (e.g.: D:\sites\MySite -> D:\sites\MySite2)
Run the CF11 Web Server Connection Tool. Connect your CF11 site (D:\sites\MySite2) to IIS.
Repeat 4&5 for each site you are parallel testing with CF11.
I'd do a Google search on "install multiple versions of ColdFusion", as there are several blog articles involving previous versions of ColdFusion. If you find one that shows CF9 paired with CF10, it should be pretty much the same for CF9 and CF11.
If it were me, though, I'd spin up a virtual machine, copy the site code in, and install CF11. I would then do extensive testing, fix code that breaks, then when once I was satisfied CF11 is working fine, copy the code updates back to my production server and do an upgrade install of CF11 to replace CF9.
-Carl V.

Similar Messages

Trying to understand the sound system

Here's my problem. My mic didn't work (neither the front mic nor the line-in in the rear), so after some research and trial and error I found that if I do
modprobe soundcore
my mic works on both the jacks
But here's where my confusion lies. This is the output of lsmod |grep snd before probing explicitly for soundcore
[inxs ~ ]$ lsmod |grep snd
snd_hda_codec_analog 78696 1
snd_hda_intel 22122 1
snd_hda_codec 77927 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6325 1 snd_hda_codec
snd_pcm_oss 38818 0
snd_pcm 73856 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 19416 1 snd_pcm
snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
snd_mixer_oss 15275 2 snd_pcm_oss
snd 57786 8 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6146 2 snd
[inxs ~ ]$
So as you can see, soundcore's already loaded, so why do I have to explicitly load it again to get the mic to work?
Once I add soundcore to my MODULES array and reboot, the lsmod output is also the same as above.
So my question is -- what does the explicit loading of soundcore do, that is not done by auto-loading of that module?

Oh... since your topic is Trying to understand the sound system, that puts you (and me) inside the whole world's population... chuckle. But I thought I'd pass along a document written by probably "The" main ALSA developer that I totally stumbled across just 3 days ago.
Go here:
http://kernel.org/pub/linux/kernel/people/tiwai/docs/
and download the flavor of your choice of the "HD-Audio" document, or simply view it online. It documents the deepest dive into the current ALSA snd_hda_* layers and issues that I've found to date (but still leaves me wanting).
Why that document isn't plastered across the interwebs is beyond me. I only get 11 hits when I search for it... such are the secrets of the ALSA world I guess.
Last edited by pigiron (2011-08-26 18:26:48)

Understanding how BB manage HTML in emails and attacchments.

Hi all,
I'm trying to understand how BB manage HTML in emails and in attachments.
I created a simple HTML table with some color and no particular complications.
If I send this table as a HTML email on my BB it will be showed correctly, with all color and attribute shown.
If I package this html code into a file named try.html and than I send it as an email attachments on my BB I lost many attribute, including colors.
Can you explain me why and eventually how to solve this problem?
Thanks.

I too am somewhat annoyed by the manner in which messages are displayed using the standard e-mail inboxes. I recently started using the Gmail application for my personal e-mail and am very happy with how cleanly messages are displayed. I hope I can find a similar application to handle my other addresses, because it is very difficult to scroll through a large volume of mail that contains HTML and URLs every day.
If anyone knows of an application that more cleanly displays messages, please do tell. Otherwise, I'm going to be doing a bit of research this evening to see what I can find. I'll post back with my findings.

"Side-by-side configuration is incorrect" when trying to install MS DirSync tool

Apologies if this is the wrong thread, but it seems like every thread is the wrong thread for this one :) Yes, I've checked all the other "side-by-side configuration" threads, but none of them seems to apply to this case.
I have a SBS 2012 machine, acting as DC, AD DS and DNS, and our organization has recently signed up for Office 365 Online E1, and we've migrated our mail there. Everything is set up, but now I'd like to sync our AD with MS Online. I enabled directory
sync in the admin user and group controls on the Office 365 site and as per instructions, I downloaded the latest version of DirSync from here:http://social.technet.microsoft.com/wiki/contents/articles/18429.microsoft-azure-active-directory-sync-tool-version-release-history.aspx.
However, when I try to install it on the server, I get this error message: "The application has failed to start because its side-by-side configuration is incorrect. Please run sxtrace or see the application event log for more detail."
Sxtrace gives the following results:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = AMD64
CultureFallBacks = en-US;en
ManifestPath = N:\temp\dirsync.exe
AssemblyDirectory = N:\temp\
Application Config File =
INFO: Parsing Manifest File N:\temp\dirsync.exe.
INFO: Manifest Definition Identity is (null).
ERROR: Line 0: XML Syntax error.
ERROR: Activation Context generation failed.
End Activation Context Generation.
Things I've tried:
Other posts seem to indicate that it's often an issue with missing visual C++ libraries, but I installed both the 2008 and 2010 C redistributables for x86 and x64, and nothing has changed.
One solution for a similar message had a typographical error in an xml configuration file, however in this case the "Application config file" field is blank.
As several other (non TN threads) around the 'net recommend, I ran SFC. It appears to work for others with the same error message. It fixed some issues and spit out a huge log file, but the problem persists, and I don't know where in the log
file to look, assuming anything in there is relevant (the file is over 700kb, so I'm not going to start spamming big chunks of it just yet unless I know what to look for).
The problem seems to come up in the context of software development (another thread on this subject is about the user developing an application from scratch) but I have no background in software dev, and this is supposed to be an official tool from Microsoft,
for crying out loud, not some homebrew thing I'm putting together.
This one issue is keeping us from moving ahead with our entire plan for user access, so any help would be
much appreciated. Thanks!!!

Hi AGrush,
Based on your description, did you mean that attempt to install Microsoft Azure Active Directory Sync tool
on Windows Server 2012 Essentials?
The Azure Active Directory Sync tool should be installed on a computer which isn't a domain controller. For
more details, please refer to the System requirements in the following KB.
How to troubleshoot Azure Active Directory Sync tool installation
and Configuration Wizard error messages
In addition, I’m a little confused that why install DirSync (That is what the Windows Server Essentials Office
365 integration is for) on Windows Server 2012 Eseentails.
Manage Office 365 in Windows Server Essentials
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Azure Tools and Templates Not Installed to VS2012 with VS2013 Side by Side Installation

I have VS 2012 and VS 2013 Ultimate editions installed side by side and have installed Azure SDK 2.2 followed by 2.3. Until I started using BizTalk Services all my Azure work has been in VS2013.
Going back to VS2012 for BizTalk Services stuff I soon noted I have no Azure node in Server Explorer and then looked and see that there are no Azure project templates either. I might guess the Azure SDKs just configure the latest VS instance.
How can I get the Azure SDK to properly config VS2012 when I have VS2013 installed?

hi,
Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions. If you have any difficulty in future programming, we welcome you to post in forums again.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch and now I'm getting this message... "Account Not In This Store Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store... help!

I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch. Now I'm getting this message... "Account Not In This Store. Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store"
Please, is there anyone one out who can help me solve this problem? I just can seem to figure out how to get to the U.S. store... thanks!

I just read this solution, tried it & now it's working...
I think I found a fix...I went to Settings, iTunes & App Stores, then click on your Apple ID...view Apple ID...change country region to USA (even though it was already USA...just do it again...go through the steps making sure the United States store is selected...agree to the Terms of Service, THEN I think what the key is is to RE-auhorize your credit card...in my case all I had to do was enter the security code...and it worked...I am now able to download the YouTube app for example...couldn't do it before.

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible or something similar. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive. I get the error message E:/not accessible access denied. Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
I keep seeing problems and lack of support for MacFUSE, that could change.
http://www.bing.com/search?q=ntfs+for+mac

TS3212 I get a side-by-side error when trying to install iTunes to Windows 7 64-bit???

When trying to install iTunes to Windows 7 64-bit, I get a side-by-side error. Has anyone else seen this problem and were you able to resolve installing iTunes? If so, how did you resolve it?

Hi
Hope you are fine there!
recommend that you attempt to resolve this issue by uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
http://support.apple.com/kb/HT1923
Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP:
http://support.apple.com/kb/HT1925
Take care!

I have a long numbers document, that I'd like to make more print friendly. It is a list of my DVD's that I just listed one after the other (1-200) when I tried to print it, it would be 18 pages, can I change it to be more like columns side by side to save

I have a long numbers document, that I'd like to make more print friendly.
It is a list of my DVD's that I just listed one after the other (1-200) when I tried to print it, it would be 18 pages,
can I change it to be more like columns side by side to save paper?

S,
I assume that you also have Pages on your computer (or some other capable WP program). I also assume that you have eliminated any unnecessary columns, so you have a 1-column table in Numbers.
When it comes time to print, Copy the entire Table: Click on the table name in the Sheets Pane and Command-C.
Switch to Pages, open a blank WP template and set the number of columns to 3 or so. With the Text Insertion Cursor flashing on the first line of the first column of the blank template, Command-V. Your table should paste into the Pages document as an Inline Object and will Wrap on the page as you desire. Then Print in Pages.
Jerry

Side by side installation Crystal Reports for Visual Studio 2010 - CRXIR2 ?

we are integrating Crystal Reports for Visual Studio 2010 into our C++ application.
We used to work with CRXIR2.
A customer of ours has upgraded to the VS2010 runtime version for 64-bit,
and seems to be having random crashes.
We haven't been able to pinpoint the problem...
They are running several of our applications simultaniously on terminal servers.
What we noticed is that they did not uninstall CRXIR2 from there system.
Is this side-by-side installation supported?
So XIR2 next to Crystal Reports for Visual Studio 2010 ?
And even: can you have a Crystal Reports for Visual Studio 2010 64bit next to a 32bit? Probably yes?
Next to that: is there any limit of concurrent users (applications) that use the .NET component?
I would think not...
Bart

Hi Bart,
Side by side installation shouldn't be a problem, unless you had Beta version of CRVS2010 installed on the same machine.
For better results try upgrading to use SP1 of CRVS2010. For CRVS2010 resources, you can go through this
Crystal Reports for Visual Studio 2010 - Deployment
I haven't seen any problem with 64bit next to a 32bit til date.
You can go through this for CR support on x64
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e
To answer your last question, go through following:
Crystal Reports Maximum Report Processing Jobs Limit
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023
Thanks,
Saurabh

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each combo

One does not "see" the images when selecting; You just select two file names, click OK, PhotoShop does the rest, and comes back with same message.

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/

SQL 2014 RTM and Sql 2008r2 standard side by side installation ..

We are planning on reconfiguring our database server and then installing SQL 2008 R2 Standard edition in a side by side installation with SQL 2014 RTM. I have researched a little, and have not seen any major issues when planning this type of configuration.
Are there any issues that may occur with this?
2008 R2 will be in the default instance, and 2014 will be using a named instance. We do foresee uninstalling 2008 R2 after a period of time, and moving all of our databases to 2014 after testing has been performed. Once we uninstall 2008 R2, will we be able
to install a default instance of 2014? Are there any special steps that need to be taken to do that?

Hello,
If possible install the SQL Server 2008 R2 instance first, then install SQL Server 2014. Through the years, the formula
of installing the older versions of SQL Server first has proved to be a winner for me.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

My ipad 2 won't rotate. i tried reseting it severally my "Use Side Switch" is set to Mute and there is no rotation lock sign close to the battery sign in the upper right side

my ipad 2 won't rotate. i tried reseting it severally my "Use Side Switch" is set to Mute and there is no rotation lock sign close to the battery sign in the upper right side

The software switch is in the task bar at the bottom. Double tap the home button and swipe to the right in the bottom of the screen. The speaker icon on the left would be where the software switch would be.
If you don't see a lock icon in the upper right corner, the screen isn't locked, reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

OBIEE 10g Installation error "The application has failed to start because its side-by-side configuration is incorrect"

Hi,
I did installation of OBIEE10g on windows server 2008r2 which is placed on VM ware, Installation completed successfully. but while starting the BI services or opening the administration tool it is showing error as below
"The application has failed to start because its side-by-side configuration is incorrect.Please see application event log or use the command line sxtrace.exe tool for more detail."
Please guide me any suggestions.
Thanks in advance
Regards,
Satya

check these Error&#58; The application has failed to start because the side by - Microsoft Community https://forums.oracle.com/message/10578756
https://forums.oracle.com/thread/958782
Resolving Side-by-Side Configuration Issues - OJ's perspective

Trying to understand CF side-by-side installations (CF9 and CF11)

Similar Messages

Maybe you are looking for