Trying to understand what to report
Let at least one balance report and you'll be doing fine. Even if you muck that up it can be fixed by letting a balance report.
Almostthere93 wrote:
This forum has been extremely helpful. Been working on my credit and I can see the positive impact. This is my current situation and don't know if im doing it right. I have the following cards: Cap1 CL 750 Balance 555Cap1 CL 750 Balance 438Barklay Card CL 1500 Balance 880Care Credit CL 1000 Balance 290 0 BalanceMacysAmazonLowes I just paid off both Capital One cards to 0. Will this lower my fico score or should i let something report? Im trying to pay down all my debt. I started at 606 and im currently around 660 on my scores. My utilization is at 33% overall without my Cap1 cards reporting 0 . They will report on the 4 and 6 of next month.This is usually done best by not adding new charges to the cards you are not able to pay in full, it makes it easier to get in front of the interest cost. Now that the CapOne cards are at zero, and you still need to buy groceries and gas, I'd use CapOne cards for those basic spend items and PIF. Since they have been reporting balances, it should be fine to continue letting them report these small amounts. Your scores will continue to climb with added months of no more negatives, as whatever negatives you have continue to fade into the past.
Similar Messages
-
Trying to understand what are the parameter/output From debug SNMP timers
Hi All
I am trying to understand what are the parameter/output
From the debug SNMP timers
Output SNMP timers :
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 fired
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 rearmed, delay = 20000
70B54A70 , 632DDE28 ² what this number means.
5000 , 20000 ² why I have different delay time ( does it means that I have delay for SNMP request )The debug messages you are seeing are related to High-Capacity (HC) timers, which manage updates to 64-bit (HC) snmp counters as defined in RFC2233.
The "fired" and "rearmed" messages indicate when each of these timers
updates ("fired") the HC snmp counters, and when they should fire next
(the "rearmed" messages). Higher speed interfaces require updates more often than lower speed interfaces, so you see two examples of that in your debug messages - 5000 ms updates vs 20000 ms update.
The numbers that are in the messages (i.e. 632DDE28 ) are internal references to the timer that has fired.
These messages do not indicate any delay in SNMP message processing, but normal SNMP operation of HC counters. -
LibMagickCore-Q16.so.7 - Trying to understand what happened
Hi,
I'm relatively new to arch and I'm no experienced C compiler, but anyway I want to understand how my linux distro works under the hood and what went wrong, when I simply typed 'pacman -Syu'. Perhaps someone can help me The situation is as follows:
I was playing aroud with the upcoming release of rails, building an app, that uses the 'rmagick' gem (freakin cool ruby way to say 'package'; in case you don't know). But upgrading my arch as usual, for a few days now my rails server doesn't start anymore, instead saying:
/home/jan/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0.beta1/lib/active_support/dependencies.rb:228:in `require': libMagickCore-Q16.so.7: cannot open shared object file: No such file or directory - /home/jan/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rmagick-2.13.2/lib/RMagick2.so (LoadError)
But:
$ ls -l /home/jan/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rmagick-2.13.2/lib/RMagick2.so
-rwxr-xr-x 1 jan users 528487 Mar 9 04:22 /home/jan/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rmagick-2.13.2/lib/RMagick2.so
So this file seems to exist at all.
And a quick search on my file system yields
$ sudo find / -iname "*libmagickcore*"
/usr/lib/libMagickCore-6.Q16.so.1.0.0
/usr/lib/libMagickCore-6.Q16.so.1
/usr/lib/libMagickCore-6.Q16.so
So (for me) it seems, that there is a naming problem with this so called .so file (compare to the " libMagickCore-Q16.so.7" part in the error above). I read in another forum concerning a similiar problem to do some magic with 'ldconfig' and I tried this, but this didn't help, too. I also read some stuff about symlinking files. But I don't want to do this since I don't know, what I'm doing with that. I'd rather like to understand what's going wrong here. Can someone help? Or can I provide further information that's helpful?
Thanks
Janthe error message means that /home/jan/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rmagick-2.13.2/lib/RMagick2.so NEEDS libMagickCore-Q16.so.7 , and that is the file that doesn't exist.
the libMagickCore-6.* files belong to the imagemagick program.
A search for libMagickCore-Q16.so.7 shows that imagemagick changed the library naming , starting with version 6.8.0-8
These links will give more info :
http://www.cmake.org/Bug/view.php?id=13859
http://www.imagemagick.org/discourse-se … =3&t=22352
you can try building rails against the new version, but if ruby is build through CMake that won't work unless you use a git version or CMake 2.8.11 is released.
A temp workaround would be to revert to the last version of imagemagick before the change was made.
Look at the changes for arch imagemagick to figure out which version that would be.
(pacman log can also help with this). -
Trying to understand what's going on with my line!
I wonder if someone could help me understand what's happening to my connection.
I've been on adsl2+ for over a month (since being on a very stable adslmax connection). I'm on a long line 62db atten' and connected at 2890 - same as adslmax which I expected.
A week ago my connection was reset ( I was unaware) and now connect at 2271 - noise margin is now 13db - always had a stable 6db with no drops.
The thing I don't get is every time I reboot my router constantly syncs at 2271. Why would it do this? Previously it sync'd at different speeds.
It's as if I'm now on a fixed rate - but still shows as adsl2+.
Spoke to bt but they say I have noise on my line and it's in 'acceptable levels' - which it isn't!
Just want to understand what's going on!
Thankssince the recent software/hardware updates at certain telephone exchanges, when you reboot the router or turn it off constantly, the exchange you are connected to sees it as a fault, and drops your connection to the lowest level possible. your connection then has to physically be reset by an engineer at the exchange.
this is what hapenned top me. for the last 8 years i have been on bt, always turning my router off at night, when i had finished, or rebooting it if i had a poor line. since june, my connection speed have been abismal, i stopped at 2420 for about a month (half of that the month before) then over a weel, it dropped to as low as 340kbps - on a 20 meg line. after going through the help desk, and "you need a new bt homehub router" event though i did not use theirs, phase, and 2 months of stress, i had an engineer come out on Saturday.
He tested everything (my line is capable of 18.3mb connections). my line was reset ay 8124kbps downstream... 27 hours later, it is on 572kbps, so needs to settle in..allegedly
to get over this, i am using a BTfon zone connection off one of my neighbours, as it is faster...technology - if you are on option 3, then sign up for it now, as things may get worse.
welcome to the world of last wednesday week.
there's now't wrong with 2 cans and a piece of string. at certain times, it is often faster. -
Trying to understand what "push" means
I love my 3g iPhone. I have mobileme too and an iMac and Macbook Air (all mac-ed out).
Here is my problem or at least what I'm not understanding.
When I change add an appointment on my calendar (or add a contact) to the iMac, it adds it to my iPhone (lol, somehow, without the iPhone being hooked up to the computer). However when I add or change an appointment on the iPhone it does not change it on the computer calendar.
How to I fix it so that regardless of where I change appointments its pushed to my iMac and me.com? Or is that not how push works?
SusanReal push (instant) works only between the MobileMe cloud and the iPhone. Between the MobileMe cloud and a Mac it's just a normal sync, which does (when set to automatic) occur every 15 minutes on 10.5 (every hour on 10.4).
If your appointments made on the phone do not appear on your Mac, first check if they got pushed to the cloud (login to me.com and check online in your browser). If the appointment is visible on me.com, start a sync on your Mac. The appointment should now be there, too. -
Panic(cpu 13 caller Crash. Trying to understand what is causing?
Ok,
so I have a Mac Pro 8 Core Mid 2010 running 32GB. For some time now I have been having crashes when I run Adobe Media Compressor. This only happens when I run a very heavy load. I have removed my ram and reseated, cleaned out the motherboard. I have also removed a GTX250 video card and I though the issue had went away but it came back. I have also reinstalled my software from scratch and buildt a new array with new HDD. I am guessing either a bad memory stick? or Processor? Or I am just stressing the system too much by renderring large files?
So here is the crash report I get.
Any ideas?
Interval Since Last Panic Report: 115028 sec
Panics Since Last Report: 1
Anonymous UUID: B05F0855-181B-5937-4A04-0C49AA1E0FE5
Sat Jun 14 22:41:54 2014
Machine-check capabilities 0x0000000000001c09:
family: 6 model: 44 stepping: 2 microcode: 15
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 1: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 2: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 3: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 4: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 5: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 6: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 7: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000800 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
IA32_MC8_STATUS(0x421): 0xbe0000400001009f valid
MCA error code: 0x009f
Model specific error code: 0x0001
Other information: 0x00000040
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC8_ADDR(0x422): 0x00000002aa41c000
IA32_MC8_MISC(0x423): 0x0020002000006242
Processor 8: no valid machine-check state
Processor 9: no valid machine-check state
Processor 10: no valid machine-check state
Processor 11: no valid machine-check state
Processor 12: no valid machine-check state
Processor 13: no valid machine-check state
Processor 14: no valid machine-check state
Processor 15: no valid machine-check state
panic(cpu 13 caller 0xffffff800f0b91b9): "Machine Check at 0x00000001044c7487, registers:\n" "CR0: 0x0000000080010033, CR2: 0x000000016d315000, CR3: 0x00000003baecb052, CR4: 0x00000000000206e0\n" "RAX: 0x0000000000003130, RBX: 0x0000000000000004, RCX: 0x000000014ec33300, RDX: 0x0000000000000314\n" "RSP: 0x00000001306ff430, RBP: 0x00000001307020c0, RSI: 0x0000000000000312, RDI: 0x0000000000000000\n" "R8: 0x000000011c008610, R9: 0xfffffffffffffffe, R10: 0x0000000000000317, R11: 0x0000000000000000\n" "R12: 0x0000000130704510, R13: 0x0000000119f1d238, R14: 0x00000000000002ac, R15: 0x0000000000000000\n" "RFL: 0x0000000000000206, RIP: 0x0000000104
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 32 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM 1, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 2, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 3, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 4, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 5, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 6, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 7, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 8, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 3 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
Network Service: Ethernet 2, Ethernet, en1
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
PCI Card: Intensity Pro, sppci_video, Slot-4
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: HL-DT-ST BD-RE BH16NS40
Serial ATA Device: ST3000DM001-1CH166, 3 TB
Serial ATA Device: ST3000DM001-1CH166, 3 TB
Serial ATA Device: ST3000DM001-1CH166, 3 TB
Serial ATA Device: ST3000DM001-1CH166, 3 TB
USB Device: hub_device, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfd300000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2503, 0xfd100000 / 2
USB Device: KEYBOARD, 0x4320, 0x0302, 0xfd130000 / 4
USB Device: Microsoft Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d1, 0xfd120000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speedIf this method allows you to home in on the problem, that is excellent.
Sometimes Double-bit (uncorrectable) errors are preceded by a group of single-Bit (correctable) errors. Theses errors are usually tabulated by the system and can be read out with this report:
Menu > About this Mac > ( More Info ) > Report > Memory
NB> The report is static, and is not updated. To see new results, the report must be invoked again.
image courtesy anandtech.com -
I just updated my Macbook (2010) to Yosemite, and it's become very slow. After searching through this community, I downloaded and run EtreCheck, but don't understand what the report means. Please could you help me with what I should do to improve my computer's speed, aside from upgrading my RAM? Thank you so much.
The report:
Problem description:
my macbook is running very slowly after upgrading to yosemite.
EtreCheck version: 2.0.11 (98)
Report generated 12 November 2014 1:44:14 pm SGT
Hardware Information: ℹ️
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3:23:3
Disk Information: ℹ️
TOSHIBA MK2555GSXF disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 249.20 GB (25.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Western Digital My Passport 0748 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
tansey (disk1s2) /Volumes/tansey : 999.83 GB (951.98 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.13) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.1) Support
[not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.9) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.sysmond.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
[running] de.novamedia.nmnetmgrd.plist Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] de.novamedia.VodafoneDeviceObserver.plist Support
[invalid?] SwapperUFi.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.cloudpath.maccmd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] PPPMonitord.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.akamai.client.plist Support
[invalid?] com.divx.agent.postinstall.plist Support
[failed] com.facebook.videochat.[redacted].plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
SurplusMeterAgent UNKNOWN (missing value)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 600 - SDK 10.10
OfficeLiveBrowserPlugin: Version: 12.2.6 Support
OVSHelper: Version: 1.1 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 223.78 GB
Destinations:
Time Machine Backups [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 223.78 GB X 3)
Top Processes by CPU: ℹ️
15% WindowServer
1% Dropbox
0% AppleSpell
0% Skype
0% imagent
Top Processes by Memory: ℹ️
60 MB Google Chrome
56 MB JavaApplicationStub
47 MB Skype
45 MB Finder
45 MB WindowServer
Virtual Memory Information: ℹ️
60 MB Free RAM
443 MB Active RAM
398 MB Inactive RAM
349 MB Wired RAM
16.91 GB Page-ins
633 MB Page-outsI advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
Trying to understand HD speed ...
Hi,
I am trying to understand what is the real life speed of a hard drive. I understand that a specific hard drive is limited by it's own specifications (RPM and buffer), by the interface it connects with (SATA 1, 2 or 3), by the enclosure's interface (USB 2 or 3, etc ...), by the computer's interface (USB 2 or 3, etc ...) and also probably by the cable it connects with.
Sellers publications and specifications seems so complicated for the newbee. How can even a diligent customer understand and find it's way in this sea of often contradicting informations ?
I bought a Samsung 1TB HN-M101MBB 2.5" drive. You can read the specs here. With the speed specifications in mind, what should be the real life speed I can max out from this wired drive if all connections, interfaces and cables are «the best in the west» ?
Media to Buffer is slow (18MBps) and Buffer to Host is 300MBps. How can I estimate the maximum speed of this drive just by reading the specs ? I know I can test the drive's speed with some software like Disk Speed Test and Aja, but since my own configuration is probably limiting the drives output, I wanted to read what the forum's wisdom would estimate.
Thanks in advance.You won't really be able to figure out real transfer rates from mfgrs. specs. You need to look at sites that test drives like Tom's Hardware report or AnandTech. Google will be a major help.
The closest you can come to any speed estimation for an external is the speed of the port. If a Firewire port has a transfer rating of 800 Mb/s or 100 MB//s, then data goes no faster than that but more likely will be slower. -
Hello,
Just to start off on the right path I would like you to know that I am a Java developer trying to understand the AWR report. To give a quick overview of my problem :
I have built a load test framework using JMeter and trying to send SOAP requests to my weblogic server. Each of these requests are getting converted multiple Insert, Update and Merge statements and getting executed on the Oracle 10g productions grade DB server. When I run the AWR report, under the "SQL ordered by Executions (Global)" I see statements that have run for 2 billion times. The JDBC connection to the database is configured to have a maximum of 40 connections and I do not see all of them being used up. The issue now is I am NOT generating that kind of load yet. I am creating around 15000 SOAP requests in an hour and I am expecting around 1million records to hit the database. The test runs fine for a couple of hours and then the server starts failing because the database is not responding back properly. When I run the statistics query on tables "gv$session s, gv$sqlarea t, gv$process p" to get the pending sessions in the database I have seen anywhere between 30 - 62 pending sessions with a activity time of more than 300 minutes.
I am sure I am not sending in 2 billion requests from the LoadTest env that I have developed but the AWR report says so. I want to know if there is a possible reason for this behavior. The stuck threads start occurring on the Weblogic server after 30 mins I start the test. Below is the exception I got on weblogic just in case it helps
2014-10-06 19:26:04,960[[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)']ERROR DAOUtil -- DAOUtil@SQLException > weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: Could not create pool connection. The DBMS driver exception was: Closed Connection
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:249)
at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:642)
at weblogic.jdbc.jts.Driver.connect(Driver.java:124)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:338)
at com.bci.rms.ea.common.eautil.dao.DAOUtil.getConnectionFromDataSource(DAOUtil.java:222)
Looking forward for reply/questions...
Thanks in Advance,
Sameer.Hello,
Just to start off on the right path I would like you to know that I am a Java developer trying to understand the AWR report. To give a quick overview of my problem :
I have built a load test framework using JMeter and trying to send SOAP requests to my weblogic server. Each of these requests are getting converted multiple Insert, Update and Merge statements and getting executed on the Oracle 10g productions grade DB server. When I run the AWR report, under the "SQL ordered by Executions (Global)" I see statements that have run for 2 billion times. The JDBC connection to the database is configured to have a maximum of 40 connections and I do not see all of them being used up. The issue now is I am NOT generating that kind of load yet. I am creating around 15000 SOAP requests in an hour and I am expecting around 1million records to hit the database. The test runs fine for a couple of hours and then the server starts failing because the database is not responding back properly. When I run the statistics query on tables "gv$session s, gv$sqlarea t, gv$process p" to get the pending sessions in the database I have seen anywhere between 30 - 62 pending sessions with a activity time of more than 300 minutes.
I am sure I am not sending in 2 billion requests from the LoadTest env that I have developed but the AWR report says so. I want to know if there is a possible reason for this behavior. The stuck threads start occurring on the Weblogic server after 30 mins I start the test. Below is the exception I got on weblogic just in case it helps
2014-10-06 19:26:04,960[[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)']ERROR DAOUtil -- DAOUtil@SQLException > weblogic.jdbc.extensions.ConnectionDeadSQLException: weblogic.common.resourcepool.ResourceDeadException: Could not create pool connection. The DBMS driver exception was: Closed Connection
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:249)
at weblogic.jdbc.pool.Driver.connect(Driver.java:160)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:642)
at weblogic.jdbc.jts.Driver.connect(Driver.java:124)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:338)
at com.bci.rms.ea.common.eautil.dao.DAOUtil.getConnectionFromDataSource(DAOUtil.java:222)
Looking forward for reply/questions...
Thanks in Advance,
Sameer. -
Trying to understand N1k licenses.
Folks,
I have a Nexus 1kv switch which shows that some of the licenses may expire soon, I am trying to understand what licenses are these and how can I get them updated?
aus-clm2-n1kv# sh license
VSG20121101153332010.lic:
SERVER this_host ANY
VENDOR cisco
INCREMENT NEXUS_VSG_SERVICES_PKG cisco 1.0 1-nov-2013 1 \
HOSTID=VDH=1932975075133845812 \
NOTICE="<LicFileID>20121101153332010</LicFileID><LicLineID>1</LicLineID>
<PAK>FXPAKA0B419</PAK>" SIGN=78C89580C244
VSG20121101161613079.lic:
SERVER this_host ANY
VENDOR cisco
INCREMENT NEXUS_VSG_SERVICES_PKG cisco 1.0 1-nov-2013 1 \
HOSTID=VDH=1932975075133845812 \
NOTICE="<LicFileID>20121101161613079</LicFileID><LicLineID>1</LicLineID>
<PAK>FXPAKA0B419</PAK>" SIGN=7A973A76F40E
ASA201308220024150380.lic:
SERVER this_host ANY
VENDOR cisco
FEATURE NEXUS_ASA1000V_SERVICES_PKG cisco 1.0 17-feb-2014 4 \
HOSTID=VDH=1932975075133845812 \
NOTICE="<LicFileID>20130822002415038</LicFileID><LicLineID>1</LicLineID> \
<PAK></PAK>" SIGN=91BCA7806A48
N1KVFEAT20121004133055620.lic:
SERVER this_host ANY
VENDOR cisco
INCREMENT NEXUS1000V_LAN_SERVICES_PKG cisco 1.0 4-oct-2013 1 \
HOSTID=VDH=1932975075133845812 \
NOTICE="<LicFileID>20121004133055620</LicFileID><LicLineID>1</LicLineID> \
<PAK>FXPAK014A5E</PAK>" SIGN=2987620AC1EC
N1KVFEAT20121102174655418.lic:
SERVER this_host ANY
VENDOR cisco
INCREMENT NEXUS1000V_LAN_SERVICES_PKG cisco 1.0 19-sep-2013 1 \
HOSTID=VDH=1932975075133845812 \
NOTICE="<LicFileID>20121102174655418</LicFileID><LicLineID>1</LicLineID> \
<PAK></PAK>" SIGN=5E8487884C80
aus-clm2-n1kv#
Thanks,
Nikplease tell me what the inout in this coode means:A parameter that supplies input as well as accepts output is an INOUT parameter.
-
Trying to understand "User/Role/Profile Synchronization" and Batch Analysis
Hello,
Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job.
I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile to be included to the full and incremental jobs?
How the incremental analysis logic is built ?
br JanneJanne,
In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
In terms of CC tables:
VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
VIRSA_CC_GENOBJ >> User, Role and Profile master data
VIRSA_CC_GENACT >> User-action, role-action and profile-action data
VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
VIRSA_CC_SAPOBJ >> Action-permission
VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
Hope this helps.
Regards,
Imanol -
Mac newbie trying to understand
I haven't learned to think in Mac yet. I'm trying to understand what actually happens to the files that I have imported from my memory card into iphoto and then exported to another folder on my hard drive for use in other applications or on a Windows PC. Are the files moved from the iphoto library and then tracked in iphoto or are they copied to the new folder thus creating two copies on the hard drive? Any of the above?
I am trying to avoid creating duplicates of the originals in order to save space and would like to understand this before I go much further and wind up with a huge mess. I'm thinking maybe I should use image capture to get the photos from the card to a folder and then import into iphoto so the originals would be more readily available for burning cds/dvds for use use in Windows as I will be doing that a lot. How would that work?
That's probably about as clear as mud. Anybody understand and can educate me? By the way, love my iMac.
Thanks.Lonr
Welcome to the Apple user to user assistance forums
And welcome to the Mac
while you will find the Mac very intuitive and easy to use it is different from a PC and there is a learning curve - the Apple tutorials are very helpful - see the right hand column for a list by major topic - http://www.apple.com/startpage/
I'm trying to understand what actually happens to the files that I have imported from my memory card into iphoto and then exported to another folder on my hard drive for use in other applications or on a Windows PC. Are the files moved from the iphoto library
By default (and strongly recommended) the imported photos are copied to the iPhoto library -- there is an option not to do this but it can be extremely problematic and unless you are a very experienced user it is strongly recommended that you use the default of copying all imported photos to the iPhoto library
and then tracked in iphoto
Yes - by default
or are they copied to the new folder thus creating two copies on the hard drive?
The original is left alone unless you choose to have iPhoto delete the photos form the camera after importing (it is best not to have iPhoto do this but to use the camera to reformat the card once everything is firmly in iPhoto and the camera is properly disconnected. Once you have imported the photos to iPhoto you can delete the original that is outside of iPhoto
I am trying to avoid creating duplicates of the originals in order to save space and would like to understand this before I go much further and wind up with a huge mess. I'm thinking maybe I should use image capture to get the photos from the card to a folder and then import into iphoto so the originals would be more readily available for burning cds/dvds for use use in Windows as I will be doing that a lot. How would that work?
This will create two copies of each original and is unnecessary - it is better to export the photos you want to use and delete the exported versions after you use them.
LN -
My itunes keeps crashing while trying to upload music ti icloud using match. I have checked my collection and there are no songs more than 200 mb. The problem is getting so bad that now my OS (windows 7) is crashing. Dont understand what is breaking itunes....
My itunes keeps crashing while trying to upload music ti icloud using match. I have checked my collection and there are no songs more than 200 mb. The problem is getting so bad that now my OS (windows 7) is crashing. Dont understand what is breaking itunes....
-
Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.
Hi there AnthPy,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W. -
I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls
Turn it off.
Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
Yours is probably called Macintosh HD.
Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
This will take 10 minutes approximately. Post back when it is finished and tell me what it says.
Maybe you are looking for
-
How can i display the success msg using module pool
Hi frnds, I want to display the error mesg or success msg in a dialogbox with ok button through module pool, Pls help me any one. Thanks in advance.
-
IPhone 5 bluetooth connection to car stereo
Just upgraded from iPhone 4 to iPhone 5. My phone connects with Bluetooth fine with my Pioneer stereo in my car, but the song names and artists don't display on my car stereo and the remote for my car stereo now won't advance songs. Volume and source
-
Hello, I would like to know what is the extact status of the compatibility of the Flex SDK on Unix. - In http://labs.adobe.com/wiki/index.php/Flex_SDK:Open_Source, the supported Unix platform are Linux, Solaris. - In http://www.adobe.com/products/fle
-
Web pages aren't loading properly
Since installing Mavericks Web pages aren't loading properly. Neither with safari nor chrome. I've added the Open DNS to the DNS pane but makes no difference. Many pages don't download images, and look like the CSS hasn't loaded either. Have emptied
-
IWeb and Facebook Share Button
Hi, I know people have asked about this issue, but I don't seem to be able to decipher any reasonable solutions.. I want to add the Facebook Share button to some of my iWeb pages. To do that I am using the HTML widget.. I know that because it's a wid