Trying to update 10.2.8 system
I currently have Mac OS X 10.2.8 and I would like to update. Can I access a free download on the Apple web site or do I have to purchase an update?
Welcome To Discussions estookey25!
Here is some additional info.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.7 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (US).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
As you are running Jaguar 10.2.x, your Firmware has probably been updated already.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version..
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Panther System Requirements
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Shop Carefully, Examine All Documentation, And Good Luck!
ali b
Similar Messages
-
I was trying to update my ipad operating system and I thought it was done. When I disconnected it from my computer the ipad went blank then the apple logo appeared midscreen with an elongated oval across the screen under it. Now nothing on the ipad works. I think it was backed up on my computer but I can't find anything that will allow me to sync the two or regain functionality on my ipad. Any suggestions?
Hi,
I would put the ipad in recovery mode and redo the update, once that is done you could restore the ipad from your backup and you would not lose any data.
http://support.apple.com/kb/ht4097
Ricc -
I am trying to update the new OS system on my iPhone 4, however, when I connect to iTunes and try to download, I keep getting an error message that says the connection is not established. I ran a diagnostics test and everything passed, however, I'm not sure why I keep getting an error message when the software is at the end of downloading.
Any tips?Disable your firewall/security software.
-
Update my phone software system to windows 8.1
I am using lumia 625,i had been trying to update my phone software system from windows 8 to windows 8.1 . But all the sites till now i browsed did not help. I did not get the notification in my software updates. Kindly help me with this so that i too could use the new features of windows 8.1 .please tell me how to get the update,
In the Nokia Software Recovery Tool, what is your 7-letter code (Nokia Product Code)? No Windows computer or USB: The same code is printed on your phone. That code determines your firmware variant which determines your current version. We can check together whether you have the correct variant, only with that code.
-
hi there my iphone 3gs is an openline but im using 02 sim card..when i am trying to update it on itunes it restore all the system..but when im trying to activate it..it dosent want to activate and my sim is no longer detecting on my phone..any ideas on ho
I wa aware
I was rather hoping it might generate some info that might be of use to help OP it doesn't make much sense as it stands without a tedious Q&A session -
Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?
Hi LyfsGD!
Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
iMac OS X 10.9.4
3.06 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in.
I trying to update iPhoto 9.5.1 and this note appears:Make sure you're logged in to the App Store with the same Apple ID that you used to download and install Mavericks. If necessary, log out of the App Store and log back in.
If that fails contact the App Store support personnel via the link circled in this screenshot: -
I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I am trying to update my Itunes software on a Windows XP system and keep getting an error message saying the update can't locate "itunes.msi" where is that file located?
thanks, JudyThe servers are getting slammed by millions of people wanting to upgrade.. just give it some time, and soon enough you'll have your upgrade.
-
trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?
You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior. -
Trying to update system on 1st generation IPAD to give to my 5 year old to use. It is saying that i have purchases on this ipad that are not in my library which is odd because everything on the ipad was purchased current ID. It is not telling me how to transfer them to library? Does anyone know?
Hi stefe109!
I believe this article can provide the information you are looking for:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
I am trying to update the operating systems on I pod touch 3rd generation.
I am trying to update my operating systems on I pod touch, 3rd generation.
The instructions say:
Settings
General
Updates
I don't have an updates options on my i pod touch?The Settings>General>Software Update was introduced starting with iOS 5.
To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 3.1.3
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
Identifying iPod models
Are you sure you really do not have a 2G iPod? Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.
Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.
-
Im trying to update my ipod to ios 5 or later and when i go to general to try and update it, there is no system update for me to update it. I bought it used to i dont know if the person before me deleted it or how i go about getting system update back on there in order for me to proceed it the update. Any help would be great.
Note your iPod may not support iOS 5
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6.1.3 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
Maybe you are looking for
-
Can't scan to email on printer or transfer pictures ad files to email on computer
I've tried and tried to fix in Default Program - cannot put anything in and cannot find email in it.Everyte I try to transfer pictures or files as an attachment to email, It comes up - no email prgram-repair it Default Programs - can't remember all
-
Hi, I am working on a file to IDOC scenario.In the input file am getting data for multiple idocs.The file structure is such that in the sender communication channel am not able to identify the recordsets and hence cannot set the number of records
-
I cannot sign in FaceTime , it keeps on saying an error occurred during activation, please sign in again
-
Hi Experts, I am new to this SCXI Interfacing. Kindly help me in the context I am developing an application which is going to be use SCXI 1125 module and SCXI 1600 controller.In the application I want to allow the user to configure various Task in t
-
We have just migrated our FMS install and application to a new quad core linux server and have found that the audio is now distorted and warbly even though it is still using the original files and application that worked fine on the old sever. We are