Trying to update 10.6.3  - iTunes is gone and will not re-load.

Trying to update to version 10.6.3 either by .exe on web site or through automatic update and keep getting an error.  "The feature you are trying to use is on a network resource that is unavilable." etc.  It lists 2 sources to try to find 'iTunes.msi' and it is not there.
Cannot even start iTunes now.  It is totally erased from my system.  Help Please
Further to this, when unable to re-load iTunes I get the error message:  The older verison of iTunes cannot be removed.  Contact your technical support group.
I hope someone out here can be my technical support group.

"The feature you are trying to use is on a network resource that is unavilable." etc.  It lists 2 sources to try to find 'iTunes.msi' and it is not there.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

  • HT1222 I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • I am over trying to update my iphone! Everytime I do it will not restore and I have to wipe everything and start again. Can anyone help me, I am on a PC

    I am over trying to update my iphone! Everytime I do it will not restore and I have to wipe everything and start again. Can anyone help me, I am on a PC

    What makes you think I can't use my phone in another country or with another sim.  You obviously can't, but we are hardly going to talk about hacking an Apple phone on the Apple site.  By the way mine is officially unlocked so can swap sims within seconds.

  • Mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit

    mac osx 10.6.8 itunes launches automatically and will not respond to quit or force quit in the Activities Monitor.  When I quit or go into the Activities monitor and try to quit, it goes off, briefly, then immediately relaunches.  If i turn the computer off, and then on, iTunes launches automatically.  ITunes 10.4.  The only thing I remember doing different, lately, is I just updated a couple of days ago.  Has anyone else had this issue?  Thanks!

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • HT204266 The APP update request came for 4 apps.  I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps.  How do I fix this?

    The APP update request came for 4 apps.  I submitted update all, but the system is stuck and will not update. Further, I cannot use those apps.  How do I fix this?

    Two other things to try -
    Power your iPad off for a minute and then back on again.
    Double tap the Home button, locate the updating apps (one by one) in the bottom task bar, press on it until the red minus sign comes up and click it. Repeat for the remaining apps. Try the updates again but do them one by one rather than Update All.

  • Trying to update,have selected all with ID etc,but will not update

    Trying to download updates...have selected "all" and entered relevant ID etc,but nothing happens....pls help!

    Reset iPad and try again. One app at a time.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I am trying to update firefox. it dowloads just fine. It will not install. Says that firefox must be closed in order to continue. it is closed.

    I was able to use Firefox until today. it will not open. i tried to update it. It downloads a newer version just fine. WhenI try to install it, it says to close firefox. Firefox isnot open. I also tried to unistall it and it won't let me.

    Hi kshikuma. This happens to me sometimes, as well.
    To solve this issue, open the Windows Task Manager by hitting Ctrl+Alt+Del.
    Go to the "Processes" tab and see if a process named "firefox.exe" or "plugin-container.exe" is opened. Close any and all such processes by right-clicking them and selecting "End Process".

  • Problems updating my 3gs on itunes to 4ioss it will not let me activate the iphone

    problems updating my iphone 3gs on itunes to 4 ioss it will not let me activate my iphone and it telling me to insert sim when already inserted

    Any error numbers given?
    If yes, check this article:
    Update and restore error messages on iPhone and iPod touch
    Has any modified software been installed before you updated?
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • Tried to update Mac book pro to maverick now system will not boot

    I downloaded the maverick update but something happened during the update and now my Mac book pro will not boot into the os.  What should I do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Firefox 4.1 does NOT ask me if I want to update when I have that item checked, and will NOT tell me what the update version is so I can decide whether or not I want it.

    Firefox 4.0.1 on Windows 7 Ultimate
    With update settings as follows:
    "Ask me what I want to do" is checked
    Firefox, Add-ons, Search Engines checkboxes are all unchecked
    If I choose "Check for Updates" from the Help menu, I am not told what the update is and am not given a choice about downloading it. It automatically downloads the update and then gives me an "Apply" button. As far as I can tell, there is no way to find out the version number for the update before downloading or installing it. A button that is labeled "Check for Updates" should do only that--CHECK, not download.
    I want to know what the version information is for the update BEFORE anything is downloaded, so I can choose whether or not I want it. That's the way Firefox 3.x worked.
    How can I restore the 3.x behavior regarding updates?

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    To see all History and Cookie settings, choose:
    *Firefox > Preferences > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"

  • Yje apps show that I have 1 update. I try to update but it shows mt wrong ID and will not allow me to correct it.. I get into apple fine but not the update???

    My system is, OS Yosmite. iMac 21.5. 2.7 GHz. intel core 15. 4GB 1333 MHz.
         It is showing that I have one update; I click on update and I get the ID/password drop down. that is showing my wrong ID. I have logged into  apple without problems but the app store will not recognise my new Apple ID and password. I am unable to change it in the dropdown. 
    I have had this problem since I updated to Yosmite??
    Is there something I can do to rectify this problem.  I have changed my ID and password but still nothing happens.
    <Email Edited By Host>

    Hey Chandrafromgbr,
    Thanks for the question. The following resource outlines a potential resolution to this issue:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    3. Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't work, try these steps:
    1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    2. Tap Settings > iCloud and try to sign out.
    3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    4. Tap Settings > iCloud and sign in with the new Apple ID.
    Thanks,
    Matt M.

  • Error 148:3  When trying to start photoshop, it gives me this error and will not let me open up CS4

    This is on my labtop, it was recently updated and now it will not let me open CS4

    If you can only get to the Recovery sceen, try using Disk Utility to verify and, if needed, repair your hard drive/flash storage. If the disk can't be repaired then you'll need to see an Apple tech as soon as possible.
    Call back with results.
    Clinton

  • TS1368 Itunes is making my computer run high i cannot connect ot hte itunes store and itunes is frozen and will not do anything.  Any suggestions?  Thanks!

    Itunes is running high and I cannot connect ot the itunes store.  Itunes is useless right now.  Computer is not infected with anything.  Problem is itunes related not third party plug-ins.  help please.  Thanks!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • How do I continue my CC update? because my CC is stuck and will not complete the update.

    Please help me someone.

    I have the same issue. No specific error message. It stalls at 95% for all program updates but continues to say Installing with nothing happening in the progress bar.
    Mac OS X 10.8

  • While updating to 8.3 screen is frozen and will not work. How do I reboot?

    Started update to 8.3, verifying update appears and nothing works. The screen has been this way for over 12 hours. Can't even shut down. Is there a fix?

    You could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear and it should reboot.

Maybe you are looking for

  • Repeats the first 20 secs of the song since update 7.0.1.8

    Hi, Ever since the update from iTunes to v. 7.0.1.8 my iTunes sorts of crashes when it starts a new song (from a list) Whenever I start a song and my mainscreen is iTunes nothing is wrong, but whenever I got another window open (for example, i.e/msn/

  • Useful info for people who are stuck with the Portege 3490CT

    can you guys try and leave a feedback? BIOS SETTINGS so usb floppy and external cd/dvd player work Boot the laptop while holding down the ESC key. It'll beep at you and display 'Check system. Then press [F1] key'. Press the F1 key. This gets you into

  • Lookup.ADReconciliation.GroupLookup

    hi, Lookup.ADReconciliation.GroupLookup displays the lookup like below, Code Key: <IT_RESOURCE_KEY>~<DISTINGUISHED_NAME> Decode: <IT_RESOURCE_NAME>~<DISTINGUISHED_NAME> "<DISTINGUISHED_NAME>" is a big bunch of words concatenated into a single line. I

  • Using Adobe Reader 10.0.1 with Windows XP

    My HP DesignJet 650C printer will not print the (Secured) PDF file but my HP OfficeJet 4315 All-In-One will. Need help! Mike hairfield

  • Subtotals using Timestamps

    I have a report that details, by date and employee, the duration of travel for any number of journeys. In the database this duration is held as a number of seconds, and is converted to HH:mm:ss in the RPD or within the report itself. What I need to d