Trying to update a few apps and ITunes is not reconizing my password.What's going on?
I'm trying to update a couple of apps and ITunes doesn't reconize my password. I've reset my password with a new password but I still get the same message. Any ideas?
He tried to disable the encrypted backup, which prompted you for the password. The password failed.
He went ahead with the backup regardless, which has the password set to it.
You restored from encrypted backup, it was again not the correct password.
He lied to get you out of the store.
End of the day nothing can be done without that password. It is NOT an appleID password, it is a unique password that you would have entered in on iTunes most likely when you got the phone and started ticking random boxes in iTunes. Try every known password combination you have. If that fails, even 3rd party tools cant access encrypted backups so you'd have to start from scratch.
Similar Messages
-
Hi everyone!
I tried to update a few apps from my iPhone, and to install new applications from APPSTORE. But i got a message :" Your Apple ID has been disabled"!!!!!!
What can i do now? Can you help me please?
The same thing happend with my IPAD....
How can i do to function all this in the same way which was working till this problem appears.
I want to mention that i have 2 email adresses asociated with the same Apple ID.
wait for an feedback!
Thanks a lot!Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it -
I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?
See if either of these things works for you. In the future ... Only update one app at a time. Forget that the Update All button even exists. It causes more problems than it does good - IMO.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream. -
I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, deleted the app and downloaded it again and the same thing happened every time. What should I do?
Do you have any firewalls or antivirus software active (e.g. Little Snitch), that could prevent the installer from contacting the Apple Servers? If yes, turn them off. Also, disable the Energy saver, to prevent the Mac from falling asleep and causing time outs.
Sometimes it will help, to run the installer in Safe Mode, see: Mac OS X: What is Safe Boot, Safe Mode? -
Hi can someone help me. I am trying to update a free app and Im receiving an error message that my purchase is declined bec of my billing info. I already updated my billing info tried it again to no avail
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
I have tried to update my Facebook app and it says there's not enough available storage to download it - I have deleted lots of apps to try and make more space but still not enough what can I do?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I am trying to purchase in a app and it will not let me. I have just changed my credit card details now I can buy in my apps. I have purchased from App Store with no problem . Please help
Contact iTune Support
http://www.apple.com/emea/support/itunes/contact.html -
Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
Thank youThere is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
About the error code.....
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
If needed.....
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again. -
I am trying to update my billing information and it is not allowing me to do so
I am trying to update my billing information and it is not allowing me to do so
Moving this discussion to the Adobe Creative Cloud forum.
Alyssa0909 please try utilizing a different web browser. I would also recommend reviewing Renew, extend, or restart your membership which discusses how you can update your payment information. -
I have an ipod touch and Itunes does not recognize device. What can I do?
I have an ipod touch and Itunes does not recognize device. What can I do?
See:
iOS: Device not recognized in iTunes for Windows -
My phone was updating the new software and now will not turn back on, what do i do?
my phone was updating the new software and now will not turn back on, what do i do?
Never fear, help is here jpeterson4! Have you attempted to plug your device into your home computer? Have you verified that the device is charged? Does anything appear on the device when you plug the device into a charger? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
I tried to update my pages app on my IPad and it will not download. It states waiting to install. Last update 9-12-2012 and the update did not complete. I have not been able to use app since then. This app was purchased so if I delete and reinstall will I have to pay again?
wwelshI have the same problem, what did you do in the end to resolve it?
-
I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal). icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
ThanksSounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.
-
i tried to update my iphone to ios7 but then it would not work so i reset my phone to try and update and then it would not activate or show on itunes can anyone help?
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
i plugged in my ipod touch last night to update to latest version and there was some sort of problem and it said i needed to restore so i did. And now it just keeps saying it can not find my ipod. it used to say "crystal's Ipod" now it says "ipod" on the left. HELP!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
Maybe you are looking for
-
Computer Shutdowns without reason
My colleague ran down the hard drive free space to almost nil. I was able to back up the important files and free up sufficient space. I ran disk utility and Apple Jack to repair scrambled files/directories. Everything seemed good to go but just befo
-
CRM LEAD STATUS CHANGE : BAPI_LEAD_CHANGEMULTI
Hi everyone, I see that you were able to change status via BAPI_LEAD_CHANGEMULTI. I am currently using CRM 4.0 trying to do the same thing; but unsuccessfully. Any help in this matter will be greatly appreciated. I undated statusx-status = 'X', fille
-
etings, I have a query I am pulling that has a date field entitled, "Completed". I am attempting to loop over the query by date to slice and dice the data for a table and chart. Here is what I have done thus far... Setup two variables where I am only
-
How can convert HTML file into xml file?
Hi, I am receving one HTML file as an input and i want to convert that receiving(html file) into .xml file.Is there any converter (tools)to do this.Pls if any give me the details with regard. Regards, mahesh.
-
ASO 1) Do we have write back option in 11 Version. 2)Can we use Time series functions Like (YTD,QTD...) 3)Can we define member as Expense Reporting Account type. 4)Can we export some specific data from ASO Cube