Trying to update my Blackerry 9300's software to 6.0, keeps giving an error
Pls i have been tyring to update my fone's software for the past week...keeps giving an error message when its about to start downloading the software. the error says check ur internet connection or try again later..
my internet connection is fine and i cant seem to figure out what the problem is... Pls ireally need help as this is beginning to be very upsetting and disappointing
Hello angelflexy044,
Have you verified that this version of device software is available from your wireless service provider?
You can do so here:
http://us.blackberry.com/support/downloads/download_sites.jsp
If it is available you can attempt the update using one of the following methods:
http://www.blackberry.com/btsc/KB03901
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!
Similar Messages
-
Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?
This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
I was trying to update my iTunes to 11.1.3 and I keep getting an error message
I was trying to update my iTunes to 11.1.3 and I keep getting the error message "iTunes has an invalid signature. The download has been removed or stopped". Thanks
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
It also says if I continue to sync it will pretty much wipe my iPhone clear.
Is there any way I can fix this, or do I have to start from scratch?Try here
http://www.groovypost.com/howto/apple-iphone-ios5-create-location-based-reminder / -
help
Try updating the App (and your account details if necessary) on your computer and then sync the updated App to your phone. Then maybe it will be resolved.
-
My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I'm trying to update my iphone 3g with software version from 2.2.1 (5H11) to 2.2.1 and an unknown error occurred (-1)
eepereira wrote:
an unknown error occurred (-1)
That Error message is indicative of a Hardware issue. The Device may need Service. Take it in for evaluation. -
Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help
Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.
-
I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable
Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum. -
We are trying to update and add new apps to an iTouch and we get an error saying "cannot connect with iTunes store." We have already reset our password.
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
Trying to update my iPad 2 to iOS 5 but it keeps failing.
I have been trying to update my iPad 2 to iOS 5 but it keeps coming up with "The iPad could not be restored. An unknow error occurred (-1)". I've been trying since Thursday but still no joy. I've tried doing it through two different PCs as well. My iPad just tells me that it needs to connect to iTunes. I updated my iPhone software with out any issues.
I went into my local iStore but they wanted £12.00 just to restore it. I was advised that they would do it for free in an Apple Store so I'm guessing that I'll have to pop into one in London during the week.
Is anyone else having these problems / been able to resolve it?Are you trying to update via wifi or connected to your computer?
Cheers, Tom -
I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently unavailable. How do I fix this?
I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!!
-
I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help
Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario -
I'm trying to update my phone to the ios7 and my phone keeps telling me I don't have enough available storage... The thing is I have deleted everything from my phone and I have nothing else to get rid of... So I need to know what to do
Check for 'others' in iTunes against your iPhone.
Restore from a previous backup to reclaim some of it.
Still want more, Restore in iTunes, setup as New.
Maybe you are looking for
-
I seem to have music files in various places on my laptop, on my husbands computer and our main imac. What we want to do is put all music on imac so when each of us logs on we have the same files availabe in itunes, but we logon seperately so we can
-
What is the difference between an ipad with cellular and one without?
Anyone?
-
Battery not installed after update
I just updated my ThinkPad W520 using the System Update utility and after rebooting I realize that the battery icon is totally gray and shows the message "Battery not installed". Checking the installations log of System Update I see -Lenovo Power Ma
-
Hi, i've create an application without login (i choose that when i created the app.). But the template/theme? is shown the apex_public_user and a logout-link in the header or footer (depends from the theme). I'd like to make this invisible and instea
-
Problem in Configuring the Object Editor User Interface
Hi, I m using NetWeaver 7.0.11 & facing the problem in Configuring the Object Editor User Interface.In the Configuration Browser ,when i click on Object Editor & choose New Configuration & try to select service,it shows the flollowing error: com