Trying to update new iPod Touches to iOS 4.1 NOT 4.2 in iTunes 9.2.1

I have older eMac 1GHz PowerPC G4 running 10.4.11 Tiger. Have iTunes 9.2.1 because iTunes 10 isn't supported by tiger. Just bought my kids iPod Touch 2nd gen with iOS 3.1.3 on them. I have same Touch (all gotten from Apple refurbed) and mine has been updated to iPod version iOS 4.1- NOW; iTunes says when my kids Touch's are attached that the new software iOS 4.2 is available. BUT- iOS 4.2 isn't supported by iTunes 9. I have the iPod upgrade file named iPod2,14.1_8B117Restore.ipsw but how can I get that to load on my kids iPod Touches? It tries to put 4.2 on and I get an message saying something like "this is the latest software" or some such thing....
Can I make iTunes install the 4.1?? Sigh!

I was able to replace IOS 4.2.1 with the real Apple IOS 4.1 through iTunes 9.2.1 by using the tips found at http://www.ihackintosh.com/2010/11/downgrade-ios-4-2-1-to-4-1-for-iphone-ipad-an d-ipod/
The tricky part is this that you must follow Steps 1-3 as it says and then only follow step one just after. When you force your iPod in DFU mode again (showing the itunes icon and USB plug) unplug from the computer running iTunes 10 and plug into the one running iTunes 9.2.1.
If the computer with iTunes 9.2.1 is a Mac running OSX 10.4, then force shut-down your mac right away. Restart your mac and then turn on iTunes only. The iPod will synch with iTunes and then you can restore from that mac or a backup.
Your music and other files will be gone but you can now use the device with OSX 10.4
Hope this helps.

Similar Messages

  • I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

    I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

    Put your ipod in recovery mode and then restore your software again.

  • HT4623 Trying to update my iPod Touch to iOS 5

    I'm trying to update my iPod Touch (3rd gen.) to iOS 5, but when I go through all the steps it says that the software is up to date with iOS 4.2.1. What am I doing wrong? Or is that the latest version of the software that the 3rd gen touch can run?

    I suspect you realyhave a 2G iPOd. Those can only go to 4.2.1. If yours is an 8 or 16 GB one it is a 2G. Apple only made 32 and 64 GB 3G iPods. A 32 GB can be either.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    http://support.apple.com/kb/HT1353#iPod_touch_late2009

  • Trying to update an iPod touch to IOS 6. Downloaded upgrade

    I tried to update my son's iPod Touch to IOS 6. Downloaded the software but kept getting an error message when I tried to update. Now iTune indicates that the device needs to be restored but it times out with an error message that it cannot be restored.
    All data, games, everything has been wiped from the device.
    Help! I am just techy enough to be able to figure out some things on my own, but I have no idea where to go with this.
    Thanks

    What is the exact wording of the error message?

  • Brand New iPod Touch - It's stuck and not being recognized by iTunes

    I just got a new iPod Touch for a gift. I plugged it in and it needed to update software to 4.0. I allowed it to download and install and left the computer alone. Came back and it is currently stuck showing the screen with the USB and the iTunes symbol. It is no longer recognized on iTunes when I plug it in. I cannot get it off this screen, I would do a restore but iTunes does not recognize this. When I plug the iPod touch in, it shows up in device manager as Apple Mobile Device (Recovery Mode) (2 of them). I am able to install the drivers on one and the other it will not let me and gives me a code 10. This is very frustrating especially since I have owned it less than 5 hours.
    PLEASE HELP I HAVE SEARCHED FOR HOURS NOTHING WORKS!!!

    Try Updating Itunes to the latest version

  • I have windows XP and last night i updated my ipod touch and this morning its not being recognized by itunes OR the computer... Can someone PLEASE help me... This is my life!

    i updated my ipod touch last night and woke up to the default screen from when you FIRST buy one and they tell you to sync it with itunes. It was recognized last night and now it isnt at ALL. I Really need some help... This has been frustrating me all morning. I would really appreciate it

    - Try manually placing the iPod in recovery mode. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next, try placing the iPod in DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My computer won't support the new iTunes, but my friend's will. If I update my iPod touch to ios 5 or later, will the older iTunes be able to support my iPod?

    My iPod has apps and music that I really don't want to lose. My iTunes at home is the older version and won't update to iTunes 11. If I update my iPod to ios 6  will the iTunes at home (the one that can't update to iTunes 11)-- support my iPod touch if I update it to ios 6 or later?-- meaning that will my iTunes be able to transfer my music and apps back to my iPod? Like, will it be able yo support it?

    - First try a rset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try restoring from backup

  • Hi, I am trying to update my ipod touch 4th gen. I have downloaded the newest iTunes and each time i try to update i keep getting error 3004 i'm on firmware 5.1.1 trying to update to iOS 6. please help

    Need help

    Ok make sure you have iTunes 11. Then connect iPod touch to computer then iTunes should pop up automatically. After it opens on the bottom left there should be a tab where it says your name and then iPod. For example (Johns iPod) click on that then it brings all your information of the iPod including restore and updating.
    Dont worry

  • IPod Touch 3G (iOS 4.1) not being recognized in iTunes (10.5.2.11) on Mac OS 10.7 Lion

    Prior to updating my Mac OS to OS (10.7.2) Lion, and thus while on Snow Leopard (10.6.8), I began experiencing problems with my iPod Touch 3G running iOS 4.1 which was not being detected by the latest version of iTunes (10.5.2.11). It was quite frustrating since i could access the iPod on other computers and with this same version of iTunes, with no problem and thus, it had to be a problem isolated to my computer. In addition, my iPod was working fine and therefore, didn't merit an OS restore and I was also reluctant to perform one. Lastly, it seemed like upon plugging my iPod into the USB ports, the mac would detect the device but would subsequently, partially eject eject so that the device would cease charging but would still be visible in System Profiler.
    These were some of the solutions I sought, after not finding an answer specifically for Mac OS 10.7 Lion. I hope it helps, as this was a complicated fix.
    I would recommend deleting the 'AppleMobileDevice' Service see: http://support.apple.com/kb/ht1747 (This should allow the device to remain connected and charging on the mac)
    Re-install iTunes (latest version)
    Also, make sure you have the most up-to-date version of Xcode which incorporate iOS connectivity in the software.
    Launch 'Image Capture' from Applications, and in devices you should see your iOS device (iPod Touch in my case) appear in the 'Devices' tab
    Select 'iTunes' in the dialog area which allows you to choose which app should launch the device.
    Here, I noticed that iTunes didn't immediately respond, but by specifying iPhoto and Aperture, the iPod began to Open in these applications
    At this point, I quit and re-install iTunes from a download from Apple's website.
    Prior to re-running the installer I re-selected iTunes in Image Capture, and after the installer completed most of the installation, iTunes began to launch.
    At completion, iTunes began to launch again, and loaded the iPod Touch in the side bar again.
    P.S. I perhaps should acknowledge that I had spent maybe an entire week, crushed and loosing productive time over this problem. I eventually began to pray and trust God (Jesus) that it would eventually work again.

    I have the same problem, that when iTunes is open it does not recognize when a CD is inserted.  I don't have an answer but I have a workaround that may be similar to yours.
    The problem occurred the first time I tried to import a CD after having updated iTunes on October 12.  I think this is the first version to support iCloud (which I don't use).  That version did not have a Help Menu.  I reinstalled iTunes and now have 10.5.0.142.  I did get a Help Menu but still no recognition of CDs.
    I can import CDs if I close iTunes and let AutoPlay take over.  I have AutoPlay set to "Import songs using iTunes".  "Show songs using iTunes"  is closer to the setting you want.  When the CD is inserted AutoPlay opens iTunes and iTunes sees the CD.
    Dell Studio XPS 435T
    Windows 7 Home Premium Service Pack 1
    iTunes 10.5.0.142

  • My ipod touch 4g ios 5 will not sync auto with itunes

    I recently downloaded ios 5 to my ipod touch 4g but now it won't auto sync with itunes. I have tried every thing!!

    After reading all the discussions I have decided the fault lies with the new ios 5 and until Apple comes up with a fix I will not resolve it. I also read in these discussions about problems with Audiobooks not showing up as audiobooks in itunes but as music. As an audiobook reader here is what I have discovered: I have an audible.com acct and so far I have noticed no change when I purchase and download a book from that site. The problem comes when I use Overdrive Media which uses DRM and WMA format. These show up in itunes but not in my ipod which means I can only listen to them on my pc or laptop.

  • TS3221 I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the p

    I am trying to update my iPod touch to the new iOS, but the error message "An error has occurred while backing up this iPod (0xE800067)" and asks me if I want to continue (which will "result in the loss of all contents on this iPod"); what is the problem?

    Maybe:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Also see:
    iOS: Troubleshooting backup issues in iTunes

  • I am trying to update my iPod touch and I want to sync my music, but it keeps saying that if I update then it will erase my current media and sync with my new one which has no songs in it, please help

    I am trying to update my iPod touch and I want to sync my music, but it keeps saying that if I update then it will erase my current media and sync with my new one which has no songs in it, please help

    Follow these instructions. When you restore the iPod as the articles say the iPod will also be updated.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I'm trying to update my ipod touch 4th generetion from the version 4.2.1 to IOS 5 but I can't!

    I'm trying to update my ipod touch 4th generetion from the version 4.2.1 to IOS 5 but I can't, itunes says there is no new uptade for this device. Why is this happening, and what can i do?

    Do you have iTunes 10.5 installed?
    Do you really have a 4G iPod, the one with the camera?

  • HT201274 So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product.

    So I have tried to update my iPod touch about 5 times now and it still says there is an error. I,ve erased all my settings and attempted to restore it, but it wont let me. I'm ready to throw it away and find a new product

    Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.

  • I'm trying to update my iPod touch 4g to iOS 6 but it wont work, why won't it work? help please

    I've been trying to update my iPod touch 4g to iOS 6 for the past week and it isn't working I have tried everything it won't even restore. I only got it in June what it happening? Someone please help!

    Mac Medic ([email protected]) wrote:
    Try a manual install, as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 
    It didn't work!!

Maybe you are looking for

  • Mounting NTFS on Solaris 10

    How can i munt the NTFS partition of my Windows XP on Solaris 10? Can somebody help me???? It can be possible?

  • Import Server issues with SP4 maps

    While using the Import Server, I have a newly created map using Import Mgr 5.5 SP4. (I used a schema created by XI v.7 SP9). When it runs, it throw and exception with the following error message: <b>"Encountered a pre-SP4 map. The map needs to be upg

  • Data compare

    Hi I would like to run below query on all tables, however it doesnt work on clob and long datatypes select * from owner.table_name minus select * from owner.table_name@remote_db; from dba_tables where owner in ( '....'); ORA-00932: inconsistent datat

  • Early watch report: Update of Frontend Release recommended

    Anybody knows what file/object that is checked for the correct release in BI frontend check in the Earlywatch report ? We are running GUI 7.10 on the PC´s checked but still the report says something like: PC Name     Current Frontend Rel. Current Fro

  • Location Group / Assortment not achieve SAP ECC

    Hi, I'm trying to release assortment master data from transaction upari_rel. When I see the log with parameters Object: u201CWu201D and Subobject u201CMAP_RELEASEu201D, everything looks ok. Key of the selection criteria: LOCGRP104933 Please check lon