Trying to update OS on 2011 macbook pro. stuck on purple screen

trying to update OS on 2011 macbook pro. stuck on purple screen

Ok. Do you remember what you were updating? Like Itunes or a security update. And did you let it complete and install? To install the update, it usually asks for your password and sometime asks you to restart. Here are some options to try. http://support.apple.com/en-us/HT203176

Similar Messages

2011 Macbook Pro Stuck on White Screen and Won't Shut Down

Greetings,
I just received a 15 inch Macbook Pro with a 2.2 i7 processor earlier today. On my previous computer, a 2009 MB P with a Core2Duo, I've had a shutdown issue on it for the past week or so: when I click the power button, and confirm the shutdown, the computer would start shutting down as normal, however once it reached the white screen with the spinning loading symbol at the bottom, it just got stuck on that. As I've transfered my old data to my brand new computer, I'm still having the same issue with it. I was wondering if this was due to a worm, or some software incompliancy? If anyone could shed any light, I'd be greatful.
Thanks.

thecloakedone wrote:
I'm running the old Final Cut Studio (2) (still have to enter my serial), and am also running these apps which could be considered out of the ordinary: *VLC
                                                  *Audacity
                                                  *CleanMyMac
                                                  *Mirage
                                                  *Handbrake
                                                  *MiroVideoConverter
                                                  *RecBoot
                                                  *SuperDocker
                                                  *PlistEditPro
That's all. Everything else is either from Apple, Adobe, or is downloaded from the app store.
Were you using any of them when the issue occurred (or just prior to it)?
Have you looked for updates on all of them?
If you want to do some digging, open Console and look at the logs at, and just prior to, the time of the issue.

I need help! i am trying to update iphoto on my macbook pro that i had bought from someone else. although i am signed into my account when trying to update it is asking me for the previous owners account details and it wont let me change it to my details

i need help! i am trying to update iphoto on my macbook pro that i had bought from someone else. although i am signed into my account when trying to update it is asking me for the previous owners account details and it wont let me change it to my details how can i solve this problem please.
thank you
Jan Robinson

That's because the Mac, OS X and the iLife apps that came preinstalled on the Mac all belong to the previous owner. The previous owner needs to call Apple care and have their Apple ID disassociated from the Mac. Then the hard drive needs to be totally erased and OS X and the iLife apps reinstalled using OS X Recovery.

I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!

I'm trying to update Firefox on my Macbook Pro, and it says I don't have sufficient priviledges, and I don't know how to fix that!

Doc Tzee wrote:
I'm in the Admin account! What's MBP? I'm pretty new to Mac.
MBP = MacBookPro
Are there other accounts? Is it possible Firefox was installed on one of them?
Have you run Repair Permissions?

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. Error message: Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platfor

I installed the 829mb Apple software update on my 2011 Macbook Pro. Upon restart, it crashed. It instructed me to hold power button to shut off and then press again to restart. Same error message keeps coming up and computer won't boot to home screen.
Error message:
Panic CPU 0 caller 0xffffff800064ba7b Unable to find driver for this platform \"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platform
\"acpi"\\n"@/sourcecache/xnu/xnu-1699.26.8/iokit/kernel/10platformexpert.cpl:150 4
Debugger called panic
Kernal uuid a8ed611fb0f-3729-8392-e7a32c5e7d74
THANKS FOR ANY HELP.
ROBB

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

Gget error message while trying to update to Maverick on macbook pro

while trying to update to OSXMavericks on macbook pro I get an error has occurred message

You're welcome.
I usually install app updates with iTunes on my computer followed by syncing my iPhone to install the downloaded updates on my iPhone. When syncing your iPhone with iTunes the first time after downloading app updates with your iPhone, the updates are transferred to your iTunes library on your computer. Less of a chance for a potential problem when doing so with iTunes on your computer.

Tried to update the EFI on Macbook Pro 2011 & Crashed?

Hey all
So this is my new Macbook Pro 2011! FIrst apple producct ever!
I installed a bunch of updates to my mac before & they worked fine- without issue
but i recently tried to install the Macbook Pro 2.3 Firmware Update & the thunderbolt firmware update but something went horribly wrong
The mac was plugged into the wall and the magsafe charger was lit green- and the update downloaded & seemed to have installed- but on reboot i got a horrible single beep & the HDD went out...
Then after that it tried to reboot on its own 3 more times b/ci heard the fan- but it was without a display [just a black screen but no picture] & but the HDD kept getting cut off...
I held down the power button for 7 seconds & it finally booted normally after a prolonged apple logo screen
& now it seems to be working fine...
can you guys tell me what the heck just happened? My macbook crashed? :[ /?
btw system prefrences says the update is installed- but system update still says its avialable?? O_O

Hey Pennyboy24,
I have an early 2011 Macbook Pro and I also just updated to the Macbook Pro 2.3 EFI Firmware Update. Mine updated fine but when the MBP restarted, it also made that single long single beep and it was slow to restart. Once it restarted, everything seemed to be normal but now my System Updates don't work. Everytime I click on System Updates, I get an error that says it crashed. Since your System Update says the EFI Firmware Update is still available and my System Update now crashes, I'm thinking the update messed up something with System Update. I've just spent weeks trying to get my OS X Lion working so this really ***** to have the EFI Firmware Update cause me another problem. Anyone with suggestions?

Late 2011 MacBook Pro stuck at spinning wheel of death after a Thunderbolt issue, HD erasing and fresh Lion install from Recovery HD. Please help me!!!

So, I think the title says it all, but to give you a little more info:
I connected my late 2011 MacBook Pro to my TV using a Thunderbolt HDMI adapter, and closed the lid. When I opened it, it wouldn't show the login screen, so I restarted using power button. Got stuck at the Apple logo with the spinning wheel. So I booted the Recovery HD and found out it was a HD problem, so I (reluctantly) erased the HD and installed Lion from scratch. When it rebooted (after DOWNLOADING the Lion components) I got some terminal commands (sorry for not being more specific, still a noob when it comes to Mac) and then the screen faded and a message appeared saying I needed to reboot the computer. So I did. 3 effing times. Then I got stuck AGAIN at the spinning wheel, and I'm currently with that on my screen. I'm trying the forums before calling Apple (my computer's still within the 90 days of warranty) because it's not yet 9 A.M. where I live

can you go back to recovery mode then open disk utility.
in disk utility, higlight the disk, the one saying the brand and size then click on repair disk under first aid tab
if it repairs fine, that's okay
if repair was not successful, go to partition and change current to 1 partition then apply
install lion again
hope this helps

HT4623 I am trying to update my Iphone5 and it is stuck on the screen, RESCUE EMAIL. It won't let me hit next, help

I am trying to update my Iphone and it is stuck on the page that says RESCUE EMAIL. It won't let me hit next?!

Payment problem
1. Check if your form of payment is acceptable
http://support.apple.com/kb/HT5552
2. Check credit card number
3. Check security code
4. Billing Address must be the same as credit card
5. Check expiry date
6. Make sure you have sufficient fund

My 2014 MacBook Pro stuck on grey screen since trying to update software over an hour ago

My 2012 MacBook Pro has been stuck on the grey screen for more than hour since I tried updating the software.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Updated my mid 2011 Macbook pro to OSX and installed it. Lost all data

I updated My Macbook pro (mid 2011 model) to OSX amd did the install. When it finally booted up, all pics, music, and documents are gone..........What did I do wrong? Please tell me I have not lost priceless pictures, 30 years of music, and important documents. I did a search on the computer for music an it came up empty. Now I have other devices, so I am capturing some info, but what did I do wrong. Is there any cure.

When I looked up info on it, I understood all it deleted was mountain lion. So now, here is my question. my ipad, iphone5 and ipod also have data. When I attach them, will I lose it again? P.S. I am 66 and not a techie...LOL

MacBook Pro Stuck At Login Screen Showing White Screen.

Hello.
I recently got a MacBook Pro 13" with Mac OS X Lion.
After I installed some updates and software, i rebooted and now its stuck
at the login screen with a white screen. I can still move the mouse but nothing happens.
I tried to restore my Mac, but it requires an internet connection. My network
is setup as non-DHCP. I have to setup a manual IP address, but there aren`t any settings to do that.
Is there any way to restore Mac OS X without an internet connection?
Thank you for your answers.

The only way to use Lion Recovery is with an internet connection.

Macbook Pro stuck at white screen on startup. HELP!

Right when i turn on my macbook pro, it plays the startup sound and gets stuck on the white screen. I can hear it running my cd right when the computer starts up. no matter what i do, i cannot get out of the white screen. it just stays there. same thing every reboot. Whats going on???
HELP ME!

Hi, I had this exact same problem with my 15in mbp just before Christmas. I shut it down one afternoon, and then later in the day switched it back on. It wouldn't boot past the white/grey screen. It wouldn't even get as far as the apple symbol. I tried to start it up several times, but to no avail.
I called up apple support, and they had me run through various keyboard combinations at start up. Nothing worked. According to my observations and the apple telephone operator's knowledge, it was as if the keyboard wasn't booting up at all during the startup sequence, hence it was not responding to the key combinations. There was no fix available over the phone and the advice given to me was to take it to an Apple Store to have the keyboard replaced. Living in Prague Czech Rep, as I am, there is no apple store, only one reseller, which I resolved to take my mbp to the next day.
However, before the night was up, I decided to to do one more thing. According to my (less-than-Vulcan) logic, since I was taking it to be opened up, and knowing that since the dawn of time, hitting machines has seemed to give them a new lease of life, I decided to see what a sharp thump to the side of the computer might do. It wasn't overly forceful, just enough to make me feel satisfied. Would you believe it, the **** thing started up the next second I pushed the power button!
Well, I had many weeks of uninterrupted, blissful computer use until a few days ago. If you haven't heard, quite a few mbp users have been reporting cases of unresponsive keyboards and trackpads whilst running leopard, leading to kernel panics and I have now unwillingly joined their ranks. I am in no way an authority on computers (I think that's rather obvious from my repair technique mentioned above) but I have a suspicion that my little episode last Christmas is related to the current issue of the internal keyboard and trackpad becoming unresponsive, so I'd watch out for that in the future once you're able to get your laptop up and running again. There doesn't seem to be much information as to why this is happening, but for my part, I've found that it's more frequent if pressure is placed underneath the battery, and less frequent under Tiger than Leopard.
I really hope, you're able to get your mbp up and running again. I know how utterly frustrating it is when it's not working and you have no idea why.

Macbook pro stuck on grey screen and making buzzing noise

hi,
Lately my mac has been playing up (1 year old), ever now and then it would make a funny buzzing noise, coming from the left side.. and i noticed it was running slower than usual. Im Running Mountain Lion and have 566GB of disk space left... after using it for about 5 minutes the buzzing noise would start and it would become unresposive with the spiral beach ball. So i would have to hard restart it. Now ever time i turn it on it gets to a grey screen and doesnt load further. eventually the sound starts again!! i have tried starting it in safe mode and verifying my disk in utilities where everything "seems to be ok" !! someone please help!!!

Ethan997,
define “an average disk”.
Your question regarding fault is akin to asking “is it my fault or the car maker’s fault that my spark plugs no longer work?” — disks, like spark plugs, don’t last forever, and fault doesn’t come into it. Similarly, the fact that your disk (or spark plugs) worked yesterday and doesn’t work today is not a sudden “breakage” — by their nature, they have a finite, variable amount of time in which they do work. This is why (in the case of disks) making regular backups is important; when the disk stops working, you’ll have an easy way to recover from such a situation.
That being said, if your MacBook Pro is still under warranty, you should be able to get a replacement disk from Apple. And even if it isn’t, you could still try reformatting your current disk, to see if you can squeeze some more use out of it — but if the reformatted volume keeps needing to be repaired (and you have the patience to deal with recovering from the same situation again and again), that’s a sure sign that a new disk would be your best option.

Macbook pro stuck at white screen.

My macbook pro is stuck at a white screen and doesnt boot. I tried resetting, tried to safe boot by pressing shift, nothing works,. It is stuck in white screen. Pls help.

If you cannot select Recovery HD at startup, problem is serious enough to take the MBP
to the nearest Apple store. They will help to resolve the issue.
Have you tried pressing option key down while starting the MBP?
Probably that has been tried already.
Best.

Trying to update OS on 2011 macbook pro. stuck on purple screen

Similar Messages

Maybe you are looking for