Trying to update the IPAD 2; now it stuck on Restory Firmware

Hi everyone,
really need assistance with my IPAD 2. It was in the process of updating and all of a sudden it got stuck on recovery mode. Now I bypass all that and now its stuck on iTunes logo.
Please advise,
Alvin

You have to try and get iPad into Recovery Mode
http://support.apple.com/kb/ht1808

Similar Messages

  • I was trying to update my IPAD 2 but it stucked, any idea what the problem can be

    I was trying to update my IPAD 2 but it stucked, any idea what the problem can be

    Stuck how ? What is showing on the iPad's screen, and/or in iTunes on your computer ?
    If the iPad won't start up then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Just updated to ios6, tried to update an app and now its stuck "waiting". Like that for 24 hours, mail is OK, web browsing OK but cannot unblock the apps thing. any ideas?

    Just updated to ios6, tried to update an app and now its stuck "waiting". Like that for 24 hours, mail is OK, web browsing OK but cannot unblock the apps thing. any ideas?

    Try update using iTune (Check for Update; see bottom right)
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/52351097ee11e908a25 cdaa4c9483fdd_zpsbaeae828.jpg

  • HT3606 i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

    i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • HT1414 I was trying to update my Ipad and now there is nothing on the Ipad and my computer does not even pick up that it is plugged into it

    I was trying to update my Ipad using I tunes and I backed music and apps on my computer but I thought it was updating and then noticed that there was nothing on my Ipad.  There is absolutely nothing on the iPad now and I have it still plugged into the computer but the I pad is not showing up in I tunes at all.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Trying to update my IPad and it gets stuck on "backing up."

    I am trying to update my ipad. I downloaded the newest update of itunes and that seemed to work.  Plugged in the IPad and now it has been running a Backup for an hour. Is this normal?  It says it is Syncing, but it is taking a long time

    I am trying to update my ipad. I downloaded the newest update of itunes and that seemed to work.  Plugged in the IPad and now it has been running a Backup for an hour. Is this normal?  It says it is Syncing, but it is taking a long time

  • What should i do first? I was trying to update the iPad when it failed.

    During the update it failed and wiped the iPad back to the factory setings, erasing the pictures of my recently pasted away daughter. Is there anyway to save these pictures before having iTunes do a restore? I bought this iPad from the online store on Nov. 26, 2010 and it was suppose to have the 4.2 version but it did not and that is why i was trying to update. It had the system almost backed up when i walked away for a second and when i returned my iPad had the USB and Itunes face like when i originally recieved it. How would i find that backed up materials, as well?

    Yes I transferred them from the camera connection. The pictures that I did not have backed up were those of my friends to that were going back home out of state and they let me copy the pictures they had taken. Also I ws worried about the pictures that I edited with Photoshop app and saved. This would of been the first time I had the oppurtunity to save them to my computer. At this point I don't think I have any other choice but to do the iTunes restore and update and hope the back up completed and whatever it was suppose to do after that is what failed. Thank you for your help.
    Background: we had twins, a boy and a girl, and at birth my little girl passed away. We were able to hold her for a while and have family and friends come in and give us their support. My day was split between being there for my wife, spending preciuos time with my daughter and running to another room to make sure my little boy was going to be okay. We spent two weeks in the hospital and are now home. After the funeral I was showing family and friends the pictures that I had taken and put on the iPad. That is when they offered their pictures and I have no idea if they still have them.

  • HT5654 i was trying to update my iphone and now its stuck or frozen with a itunes symble on the screen

    I was trying to update my iphone to 7.2 anf now my phone is frozen/stuck with a itunes symble on the screen

    Ntmate68 wrote:
    it's stuck on a screen that has a iTune and plug picture
    See Here  >  http://support.apple.com/kb/HT1808
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • When trying to update my iPad 2 to iOS 7 I keep getting the message that it has stopped because the file is full.  There is plenty of room on the iPad.  It also says to check the settings.  What do I do now?

    When trying to update my iPad on iTunes I keep getting a message that the download has stopped because the file is full.  There is plenty of space on the iPad.  Also, the message says to check the settings.  What am I supposed to check in the settings?  What do I do now?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • HT201210 I tried to update my iPad 2 with the iOS 6.0.  Now I am stuck in restore mode and keep getting an unkown error 3014 and sometimes -1.  What in the world can I do?

    I tried to update my iPad 2 with the iOS 6.0.  Now I am stuck in restore mode.  I get "unknown" errors 3014 and sometimes -1.  Any ideas?

    Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

  • HT4623 I tried to update my ipad but an error was received halfway through download and now the ipad is locked up. How do I fix this?

    I was going to update my software for the IPad and I connected it to Itunes it synced up and brought up the ipad but didn't have the name, serial number or anything else but a question mark. After being synced and trying to doa software update of about 15-20 mins it suddenly brought up a dialog box and said it couldn't update the ipad until it was restored. I then hit the restore button and after a couple of minutes it didn't do anything and it disconnected me from itunes and now the only thing on the screen is the apple. I can not get it to do anything. I have tried to sync to itunes but nothing. If you push the button on the screen and the top button at the same time it will shut down. Can somebody please help me????

    I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
    In the terminal (it kept failing to download in Safari):
    curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
    Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
    Quit and relaunch iTunes.
    Should now work for you.

  • HT1414 I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without

    I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes

    I hope that you can see this response. The forum software is acting quite bizarre today.
    You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
    If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
    If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
    I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again.

  • I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I've spent 6 hours trying to update my iPad, and it doesn't work. It can't get past trying to back up, and just stops and gives an error code. I've deleted the backup, re-synced, and tried again and still no luck. What do I do now?

    I am not running any antivirus software on my Mac, and I have the firewall shut off. Any other ideas? I have not problem downloading all other Apple software updates. I downloaded the latest iTunes software before starting the iPad update process.

  • I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo

    I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

Maybe you are looking for

  • My problems with Nokia Lumia 820

    I was a big fan of Nokia until two months back when I purchased Nokia Lumia 820. It's been two months and I'm having tough time with the handset. First it was the heat issue. I know smartphones are tend to get heated up due to processors. But my mobi

  • Problem with Itunes program

    Recently, my itunes simply will not open from any of the prgram location on my computer. If tried deleting the program and redownloading it but it still will not open. Also when I do click on the icon and then search to see if its operating the compu

  • JVC Everio GZ-MC200 compatible?

    JVC Everio GZ-MC200 compatible with minimac? http://www.apple.com/macosx/upgrade/camcorders.html there is no my camcorder!

  • Hi can we add a field with ''quantity'' in Adobe Forms Central?

    I would like people to choose how much tickets they would like to buy for our foundation and have the possibility to pay online with Paypal, since our account is already created. Thanks

  • Getting scroll position

    I can read and write the zoom level of a document (doc.zoom).  I can scroll to a specific point in the document (doc.scroll).  Bu I can't read the current scroll position.  Is there a way around this. The scenario:      I have 24 pdf documents each w