Trying to upgrade ipod to 5.0.1 and system keeps timing out
I have an ipod touch 4th gen and need to upgrade to 5.0.1. System times out and won't upgrade.
Have you tried disabling the computer's securty software during the download and update?
It could also be an Apple problem since some users have reported that error today even with the security software disabled.
Similar Messages
-
I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.
Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data. -
Ok so I'm trying to update my iPad, and it keeps "timing out." I got to the actual update process, and it failed and asked me to restore my iPad, but I just can't lose all of my apps and photos! I payed for a lot of my apps, and my photos are just too important. Someone please help!
If rhe apps and photos are that important you made sure that you took the steps in order to keep them safe in an event like this didn't you?
You did backup the iPad before you decided to update the iPad correct?
And you did transfer all of your apps and other purchases into iTunes before you decided to update correct?
If you did, just restore the iPad and then restore from the backup at the end of fhe process and follow that with a sync with iTunes and you will lose nothing,
Now if you didn't do any of the precautionary steps .... -
TS1717 i am trying to down load an itunes update to windows and it keeps timing out?
IM trying to download an Itunes update to my PC and it keeps timing out.. any help??
Would this matter then? can you not update the 3g to the lastest software?
-
Trying to upgrade software for my iphone 4 and it is greyed out
i have an iphone 4 and have not been able to upgrade my software to either version 6 or 7. I am still runing version 5. When i go to sofware update to upgrade my software, my "download and install" is greyed out and does not allow me to update. Any suggestions? Thanks
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
I am trying to download OS5 onto my iPad 1 but it keeps timing out. Any ideas
Hi. I cannot get OS5 downloaded onto my iPad 1 as keeps coming up with a time out error when almost complete ? Is this a known problem ?
Try temporarily disabling your firewall and security software and see if the download will complete.
-
my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?
- To get around the passcode issue, place the iPod in recovery mode. For how to see:
iPhone and iPod touch: Unable to update or restore
- If you are getting a network timeout error during the restore, disable the computer's security software during the restore. -
I have an iphone 4 and trying to upgrade ios 6, downloaded the version and when trying to install get an error that i need internet, i have internet of course... please help...
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, BebaIf you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ? -
I am trying to transfer songs from my iPod touch to my computer and can not figure out how to do it. I also want to transfer the songs I have back in to iTunes. My hard drive went out on my computer and I lost all of my songs, except for on my iPod. I have an iPhone as well and did an update and it wiped out all of my songs. Someone please help me.
The music sync is one way - computer to ipod. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your comptuer for just such an occasion. use your backup copy to put everything back. -
My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?
Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch -
Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere. on my phone it is in the settings to upgrade, iv been online and looked but cant find any link. can someone send me a link or direct me the right way many thanks.
Upgrading the iOS "over-the-air" was introduced with iOS 5. If you are currently running an iOS version < 5.0 you can only update through iTunes. Connect your iPad to your PC or Mac. Open iTunes and click on "Check for updates"
-
Trying to upgrade my iTunes to 10.5 but I keep getting the message "the URL could not be opened". What do I do?
Use this: http://appldnld.apple.com/iTunes10/041-2598.20111011.9Cp3o/iTunesSetup.exe
-
I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?
uninstall acrobat standard, clean and then install, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Maybe you are looking for
-
Can I get rid of all the passwords in my phone, and just turn it on?
Can I get rid of all the passwords in my phone, and just turn it on?
-
My AS3 buttons only work the first time
I have set up my buttons so that are each a movieclip with 'over' and 'out' states/frame labels. They exist on the main timeline. The actionscript controlling them is situated in a frame on the main timeline and the frame holding that actionscript is
-
Poor quality Export for HD with moving objects
When I export from iMovie6 any moving image is very poor quality. I am using a Sony HDR-HC1 and trying to export at the highest possible settings. When the image is still the quality is very good, but if anything moves the image goes "wobbly" and "ji
-
Change domain name BPC 10 for MS
Hi, We will change domain name so I will need to change that in BPC for all the end users, which should not be a problem but for the service users running BPC, BPCInstall, BPCAdmin and BPCUser I guess it can/will be a problem. Option 1 - reinstall SA
-
I am working with our Linux admin to understand this issue: We have a Dell server with 4Gb of memory, 1-CPU, OS is RedHat Linux 3.x, for our DEV instance. We are starting to play around with the SGA_TARGET and SGA_MAX_SIZE init.ora parms in our 10g i