Trying to upgrade on board Cpu to an AMD FX Black 6300
Hi,
I currently have AMD Phenom II X4 810, the stock cpu that came with the desktop. I want to Install an AMD Fx Black 6300. My bios version is 5.02. I don't know if that needs to be updated? If so where can I do that? There is a list of compatable cpu's. If thats the case i cannot use this cpu in my desktop?
According to THIS PAGE, the upgrade processors are:
TDP=125W
AMD Phenom II X4 9xx/9xxe/8xx Quad-Core (D)
AMD Phenom II X3 7xx/7xxe Triple-Core (H)
AMD II Athlon X4 6xx/6xxe (P)
AMD II Athlon X3 4xx/4xxe ®)
AMD II Athlon X2 2xx/2xxe ®)
The AMD FX 6300 is not on that list. Unless someone gives you a modified BIOS, it is not likely to work.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.
Similar Messages
-
I have a iq 804 and tried to upgrade to win 8, but the screen goes black after windows update.
i have been working with microsoft support for 5 hours everyday for the last 5 days. they could not help, now they ask to wait for hp to come out with new drivers to support win 8.any idea if they are going to add those since my computer is 3 years old
Here are the specs for your HP TouchSmart IQ804 Desktop Computer. According to the specs, this model shipped with Windows Vista 64-bit and was introduced for sale on or about 27-Aug-2008... making it almost 5 years old. Due to its age, HP has no intention of providing specific support or drivers for this model. Please read HP's position below.
THIS is HP's position on Windows 8 support and any HP computer not originally supplied with Windows 8;
1) Not all Windows 8 features may be available on all PCs.
2) Your particular experience with Windows 8 will be determined by the capabilities of your PC.
3) HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
4) If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
5) Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
1) Screen Resolution Requirements
2) Limitations with DVD playback software
3) Limitations with Blu-ray playback software
4) Limitations with TV Tuner software
5) Secure Boot & other UEFI dependent features
6) Limitations with touch screen capabilities
"Windows 7 (also includes Windows Vista) PCs with touch screens will not have full Windows 8 touch capabilities after upgrade. HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points. Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7."
7) HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
With all of that said, you may be able to install Windows 8 and it may work but many of its features may no longer function under Windows 8.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I'm trying to upgrade a model MB292LL iPad to iOS 6
I'm trying to upgrade a model MB292LL iPad currently using iOS 5.1.1 to 6, but when checking "software update" I''m being told "software is up to date" - can this model be updated to 6? If so, what should I do differently?
Well, I do appreciate you pointing out the obvious .
Homwever, I still must ask WHY can't it?
Does the 1st generation Ipad not have a cpu capable of handling the software?
Is it some complex amount of code that the 1st gen Ipad is not able to handle?
I find it quite interesting, as I still have my 1st gen Iphone as well. -
I tried to upgrade my Photoshop 11 to 13, but it dosen´t work. I could install the Photoshop 13, but I can`t open it.
Hi Werner,
Since you were able to successfully install PS13, can you please suggest what is happening when you are trying to open the Product? Are you getting a splash screen or is it not even giving that? Try to disable the graphics card & Switching back to the On board graphics and try again.
Cheers,
Kartikay Sharma -
Tried to upgrade to lion from SL and computer crashed
Mac Book 2.4 , 4ig ram Running 10.6.8 Tried to load lion in and crashed now it won't recognize Snow Leapard disc to reformat the drive. I've tried to upgrade in the past same thing always causes total melt down. Got it to load went to disc utility's tried to repair to no avail. Now I'm with this issue. I did backup everything so If I can get it to read the disc I'll just start from scratch. Should of left it alone:(
Kansurf wrote:
Mac Book 2.4 , 4ig ram Running 10.6.8 Tried to load lion in and crashed now it won't recognize Snow Leapard disc to reformat the drive. I've tried to upgrade in the past same thing always causes total melt down. Got it to load went to disc utility's tried to repair to no avail. Now I'm with this issue. I did backup everything so If I can get it to read the disc I'll just start from scratch. Should of left it alone:(
Don't think it would have mattered. Sounds like a bad hardware problem. Quite possibly a crashed hard drive. It was probably trying to tell you that during your other total melt downs. May even be your logic board. Get it to an Apple Repairer pronto, hopefully you are still under warranty or Applecare.
Cheers
Pete -
P35 NEO-2 FR RAID 0 problem trying to upgrade drives and delete original RAID 0
I upgraded my Samsung F1's 1TB to F's, problem is I forgot to divorce the two drives first before trying to install them in other systems. I wiped them clean but Intel's RAID software stamped them RAID 0 so when I tried to upgrade the drives nothing would show. The drive is recognizned on another board as a half of a RAID 0 as 1,80TB.
My board beeeps around 5-6 times but not in a sequence followed by the regular boot sequence but will not boot. I wanted to hit CTRL F and delete the original RAID 0 partition with the original drives. I'm getting 3 green lights with one red. bottom green, second to bottom red and the rest green. Says in manual something about ISA booting. I'm very frustrated with myself, This time, I went full retard.
How do I fix and what do the erractic beeps 5-6 before the normal beeping process mean?Are you trying to mirror 2 x 1TB or ?
You can try clearing the RAID by doing a CMOS clearance. -
I'm trying to upgrade my iCloud storage for the new price.
I'm trying to upgrade my iCloud storage for the new price, but it doesn't gives me the option of 20G for $0.99 a month.
How can I get 20g for $0.99 a month?
Thanks!Katherine,
have you read the message in the panel? Something is wrong with your credit card. Perhaps you have to enter a new date of expiration.
In the small print it says, there is still a purchase, that needs paying,"Ugly Heart" with an amount of R 9.99. And "We were unable to authorise your credit card for this purchase". You will first have to update your Billing Information before you can proceed to make a new purchase for upgraded storage. Click "Account Details" in the iCloud panel.
-- Léonie
If you cannot fix the account from the iCloud panel, open iTunes and sign into the "Store" menu, Then use the "Store > View account" item there to check for problems with your Billing Information. -
I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.
Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy -
Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
ThanksWithout contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable. -
I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes. Now, my phone wil not work at all. I think it is backed up on my computer, but I am unable to get it to download to the phone. What to do?
Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim -
HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.
403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such? -
Good morning
I am trying to upgrade my iPhone via my macbook but the following message keeps coming up and the download does not work
"There are purchased items on the iPhone “Mark Price’s iPhone” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this"
Please advise how I can transfer these files, I am not sure what files are in question.
I've only had the MacBook a couple of days, I am PC savvy but this is all new to me so please keep it as simple as possible. I am a brit based in Bahrain.
Regards
Mark Priceokay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
Starting to get really annoying this thing.. Any smart suggestions what's going on? -
I am trying to upgrade iPhoto from a .dmg file ???
I am trying to upgrade iPhoto 9.4.2 to 9.4.3 on a Mac Mini with Mountain Lion. When I run the iPhoto9.4.3Update.dmg file, I get the alert:
The version of iPhoto installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available.
When I close the alert, it shuts down the update.
Since at our location our only option to get on the internet is via a 3G modem with a data cap of 5 GB per month, we take a laptop into the local library, hop on their wifi, and download dmg files for large upgrades like iPhoto (in this case, 766 MB). This has always worked before - what is different here?
Since we were near the end of our data month and still had a GB left, I then tried the software update route from the Apple menu on the Mac mini. It started downloading the 9.4.3 update which was only 177 MB. 2 hours later it had just finished the download and suddenly continued onto another download (still in the iPhoto upgrade) of a 1.2 GB file. So I aborted. So my 2nd question is what was happening here.
And my 3rd question is what to do next?Evidently there was more than one update listed for your Mini. Next time launch the App Store app in your Applications folder and log in with the Apple ID used to purchase your Mini. Click on the Updates folder and look for available updates. There you can select one at a time for installation.
Look in the Download folder in your Home folder to see if the 9.4.3 update is there.
OT -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.
Maybe you are looking for
-
Satellite M70-394: WLan does not work after wake up from standby
Hi all.... I have a problem with my WLan connection and hope one of you may be able to help. Starting my computer from off there isn't a problem with the WIFI connection but if I put the computer into standby by closing the lid and then restarting it
-
Hi My version of garagband for the iphone 4 is missiong the 'sections' tab in the settings. It means I can't record beyond 8 bars. I downloaded the app in Australia and just wondering if there are different versions or this is an issue anyone else in
-
Ok apple I have one complaint and that is the fact that when I am on the Internet with my iPod I can't get onto the AppStore because it says cannot connect to iTunes store
-
Hi All, Getting the following error while deploying the BPEL process having DB Adaptor... Could not initialize activation agent. An error occured while initializing an activation agent for process "pollingprocesstest2", revision "v2009_08_11__6784".
-
Pre populating the database field when a user logs into web forms
Hi, When my users log into the web forms application I want the database name field to be pre populated, how do I do this, I presume it can be defined in the config files ? Thanks in anticipation. SDG.