Trying to upgrade Quickbooks in OS 9 to OS X 10.4.3
does anyone know if i do this upgrade, will i lose my quickbooks? should i back it up?
Hi, Milton, and welcome to Apple Discussions. Yes: you should absolutely, positively back up your Quickbooks data — right away, without any regard to whether or not you do anything else. Every iota of important, irreplaceable information that is stored on your computer should be backed up — at all times.
Similar Messages
-
I'm trying to upgrade my iCloud storage for the new price.
I'm trying to upgrade my iCloud storage for the new price, but it doesn't gives me the option of 20G for $0.99 a month.
How can I get 20g for $0.99 a month?
Thanks!Katherine,
have you read the message in the panel? Something is wrong with your credit card. Perhaps you have to enter a new date of expiration.
In the small print it says, there is still a purchase, that needs paying,"Ugly Heart" with an amount of R 9.99. And "We were unable to authorise your credit card for this purchase". You will first have to update your Billing Information before you can proceed to make a new purchase for upgraded storage. Click "Account Details" in the iCloud panel.
-- Léonie
If you cannot fix the account from the iCloud panel, open iTunes and sign into the "Store" menu, Then use the "Store > View account" item there to check for problems with your Billing Information. -
I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.
Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy -
Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
ThanksWithout contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable. -
I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes. Now, my phone wil not work at all. I think it is backed up on my computer, but I am unable to get it to download to the phone. What to do?
Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim -
HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.
403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such? -
Good morning
I am trying to upgrade my iPhone via my macbook but the following message keeps coming up and the download does not work
"There are purchased items on the iPhone “Mark Price’s iPhone” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this"
Please advise how I can transfer these files, I am not sure what files are in question.
I've only had the MacBook a couple of days, I am PC savvy but this is all new to me so please keep it as simple as possible. I am a brit based in Bahrain.
Regards
Mark Priceokay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
Starting to get really annoying this thing.. Any smart suggestions what's going on? -
I am trying to upgrade iPhoto from a .dmg file ???
I am trying to upgrade iPhoto 9.4.2 to 9.4.3 on a Mac Mini with Mountain Lion. When I run the iPhoto9.4.3Update.dmg file, I get the alert:
The version of iPhoto installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available.
When I close the alert, it shuts down the update.
Since at our location our only option to get on the internet is via a 3G modem with a data cap of 5 GB per month, we take a laptop into the local library, hop on their wifi, and download dmg files for large upgrades like iPhoto (in this case, 766 MB). This has always worked before - what is different here?
Since we were near the end of our data month and still had a GB left, I then tried the software update route from the Apple menu on the Mac mini. It started downloading the 9.4.3 update which was only 177 MB. 2 hours later it had just finished the download and suddenly continued onto another download (still in the iPhoto upgrade) of a 1.2 GB file. So I aborted. So my 2nd question is what was happening here.
And my 3rd question is what to do next?Evidently there was more than one update listed for your Mini. Next time launch the App Store app in your Applications folder and log in with the Apple ID used to purchase your Mini. Click on the Updates folder and look for available updates. There you can select one at a time for installation.
Look in the Download folder in your Home folder to see if the 9.4.3 update is there.
OT -
I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?
yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this. -
i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??
Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734) -
I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?
You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's -
My box tried to upgrade and now it gives me a blac...
Hi,
I'm carrying this over from another message as it was in the wrong place and deserves it's own thread. So far the conversation runs ...
ME : I was sat watching late on Friday night (around 1:00am Saturday morning actually) when my box decided an update is in order. I was patient, I waited and the client was downloaded and seemed to install.
DS : So did you see a green screen, followed by the boot screen?
ME : Hard to recall now but I think picture dissappared and the pale blue starting screen appeared followed by 'please wait'. Then it went to the client download screen. I don't remember any green screen.
ME : Only problem is that I now just get a black screen.
DS : I did have to wait for 15 mins after one of the updates, after the above screens, before our black screen vanished. how long are you waiting?
ME : I've left it over night, around 8hrs.
ME : Try a factory reset and it tries to update but still a black screen.
DS : As above
ME : Called the help desk and they escalated it to their technical people but said it was a known issue and they were trying to correct it. It will be fixed by November. OK I thought a couple of days and it's November but wait, on pressing them it seems that November means the second week of November.
DS : They are getting confused by the sounds of it. A random reboot issue is probably what they are talking about
You sometimes have to explain it as if you were talking to a child to get your problem understood
ME : Yeah, I noticed I did get the impression that they didn't really understand but no matter how much I tried to explain and dumb down I don't think they were really listening and I just got the same answer back. Gave up in the end.
ME : Called them again and the best advice seemed to be to plug it into a different power socket!
DS : What, the box or any powerline adapters (PLA's), if you use these?
The box can be plugged in to any mains socket, though PLA's can sometimes lose the connection between themselves, thus the box loses it's connection to the bt vision server(s).
ME : They were talking about the box. I played along and did as they asked ... their next question was 'is the blue light on' ... yes my box has power!
There are no PLA's involved, I have an ethernet cable direct to the hub.
When it attempts the upgrade the progress bar partially fills, the ring light on the box turns yellow and it starts the download. After several minutes the bar fills apart from a tiny sliver at the end and it says 'Download of client successful. Upgrading'. The power light flashes off briefly then back on and then I see just a black screen. There is no aparent reboot at this stage and the screen remains black overnight as I mentioned.
If after leaving it I then disconnect the power and boot up again it cycles through 3 boot attempts and then tries an upgrade again. Something of a circular problem!Theraphosid wrote:
Hi,
I'm carrying this over from another message as it was in the wrong place and deserves it's own thread. So far the conversation runs ...
ME : I was sat watching late on Friday night (around 1:00am Saturday morning actually) when my box decided an update is in order. I was patient, I waited and the client was downloaded and seemed to install.
DS : So did you see a green screen, followed by the boot screen?
ME : Hard to recall now but I think picture dissappared and the pale blue starting screen appeared followed by 'please wait'. Then it went to the client download screen. I don't remember any green screen.
Well it does sound like the update worked, though you should of seen a green screen, even if it was brief. The green screen indicates that the box is accesing the hard drive. The more content saved on the box, the longer this screen wil appear.
ME : Only problem is that I now just get a black screen.
DS : I did have to wait for 15 mins after one of the updates, after the above screens, before our black screen vanished. how long are you waiting?
ME : I've left it over night, around 8hrs.
It should of worked by then
ME : Try a factory reset and it tries to update but still a black screen.
DS : As above
ME : Called the help desk and they escalated it to their technical people but said it was a known issue and they were trying to correct it. It will be fixed by November. OK I thought a couple of days and it's November but wait, on pressing them it seems that November means the second week of November.
DS : They are getting confused by the sounds of it. A random reboot issue is probably what they are talking about
You sometimes have to explain it as if you were talking to a child to get your problem understood
ME : Yeah, I noticed I did get the impression that they didn't really understand but no matter how much I tried to explain and dumb down I don't think they were really listening and I just got the same answer back. Gave up in the end.
I'd call then again and explain it how you have on here, if you have already do the same again (and again and again and again and again) till they understand
ME : Called them again and the best advice seemed to be to plug it into a different power socket!
DS : What, the box or any powerline adapters (PLA's), if you use these?
The box can be plugged in to any mains socket, though PLA's can sometimes lose the connection between themselves, thus the box loses it's connection to the bt vision server(s).
ME : They were talking about the box. I played along and did as they asked ... their next question was 'is the blue light on' ... yes my box has power!
There are no PLA's involved, I have an ethernet cable direct to the hub.
When it attempts the upgrade the progress bar partially fills, the ring light on the box turns yellow and it starts the download. After several minutes the bar fills apart from a tiny sliver at the end and it says 'Download of client successful. Upgrading'. The power light flashes off briefly then back on and then I see just a black screen. There is no aparent reboot at this stage and the screen remains black overnight as I mentioned.
Hmm, could be a faulty hard drive......
If after leaving it I then disconnect the power and boot up again it cycles through 3 boot attempts and then tries an upgrade again. Something of a circular problem!
-+-No longer a forum member-+- -
I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says ios8.0.2 improvements from 8.0.1 are available but not the whole ios. What to do?
It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.
-
How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, BebaIf you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?
Maybe you are looking for
-
How to copy phone numbers from iPhone 5 to Panasonic KX-TG7445?
My phone is linked to the Panasonic phone system. Does anyone know how to copy selected contacts' phone numbers to the Panasonic phone system?
-
I have some line items with restriction '8' (Items cannot be processed until next regular invoice). After creating an invoice, the restriction '8' disappeared and the items can now be cleared. Is there a way to clear items with restriction '8' during
-
Multi line pattern search with like
Hi All, I am using oracle 9i. I want to search for multi - line pattern. for e.g. update tablename set columnname . I used select * from user_source where text like '%update tablename%set columnname%' but this only seem to work if update tablename se
-
Error when creating workcentre t.code CR01
Hi All, I am trying to create a work centre in t.code CR01. I have entered Plant, work centre and work centre category system throwing error. Error : Work centre category 0006 does not exist. I have verified in SPRO, Entry 0006 work centre category i
-
Dears, i m in SD module and i m have this scenario, I need to create dummy Per No (employee) to assign it to customer (Partner function), this Dummy Per No will be considered as sales representative who takes commission, but what exactly i need is to