Trying to upgrade to 7.7, unable to install to drive F

I am trying to upgrade to 7.7 and the download comes in but the install fails saying "unable to install to drive F". How do I change this as my current itunes is on drive c. No drive F is available.

Hello FlaOne,
Welcome to the HP Forums.
I see that you have downgraded the operating system back to Windows 7.
So I can better assist you, please respond with your printers Model Number:
How Do I Find My Model Number?
Once I have the printer model number, I can then research the issue and attempt to find suitable troubleshooting steps.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

HP Envy 5532 Printer - unable to install a driver with full functionality

Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
Any help would be appreciated
Thanks Steve

@Steve_Reeder, welcome to the Community
I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
I will do my best to make some helpful suggestions to you to try out.
It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
Another idea would be to run the System File Checker to see if this scan will pick up any issues:
Using System File Checker to Restore System Files
Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
I hope to hear from you, enjoy your Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Agere Ethernet Controller (ET-131x) - unable to install the driver

I need to install the following wired NIC:
01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
It seems that the "et131x" kernel module is necessary.
The web site bellow gives instructions on how to install the driver from sources:
http://dadams1969.googlepages.com/et131xkernelmodule
Unfortunatly I am unable to do it.
I have also tried to install the module compiled by a member at the following address:
http://www.archlinux.org/~tom/packages/
The module seems to be installed properly. A new folder is created in /lib/modules/
However, I am unable to load it.
# modprobe et131x.ko
FATAL: Module et131x.ko not found
#insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module format
Am I doing something wrong?
NB:
The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
Last edited by sylvain77 (2007-09-26 08:23:48)

Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
Get the new package in the same place as before, and let me know how it goes.
It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

Can not update Itunes to 7.4... Unable to install Gear Drive???

I had this problem before, but my daughter just received the new Ipod Classic and itunes, again needs to be updated. Why can no one answer this one question? When trying to update itunes I always get this error message: *"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted to be deleted during the next system reboot. Please reboot the system and run itunes again."*
I can reboot the system FOREVER and still get the same response. CAN ANYONE PLEASE GIVE ME SOME FEED BACK!!! Thank You
<SCRIPT type=text/javascript>_popupControl();</SCRIPT>

Does this help?
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

Unable to install twain driver for Epson scanner -- Leopard

I finally got the printer driver working for my Epson CX6600.
Downloaded the correct driver from the Epson website and all is fine.
But now my scanner won't work.
The CX6600 is an all-in-one.
The Twain Scanner Driver was paired up in the same download.
However, after downloading the installer file I was unable to install it.
The cursor just spins and spins -- and I then get a repeated warning window asking if I want to open this software downloaded from the Internet.
I have to do a Force Quit to get out of the installer app.
Ideas?
Thanks,
Danty

where you able to resolve this problem? I also have this problem. Can scan manually.

Unable to install new driver for Quadro 4000

Hello
downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
OS : Mountain lion
anywhere button activated in security window
Please help

Try downloading the update again. Perhaps the one you have got corrupted during the download process.
You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
Safe Mode
Safe Mode - About

Unable to install printer driver

I am settting up my new printer and can't complete the task.
I attempt to download the software and keep getting a message that the device is not detected. Please help
Thank you

@Bstraub, Welcome to the HP Forums!
I saw the message about the printer not being detected when you attempt to install it, and I will certainly help you. I am going to ask that you please let me know some more helpful information to help me research the problem for you to get started.
If there are any steps here that you have not tried, please try them before responding and include the result:
Which connection type are you using to install the printer (USB/ wireless/ wired/ Bluetooth)?
What is the Operating System of the computer?
Will the printer make copies successfully?
What Firewalls and Anti-virus software are installed?
Have you tried disabling or uninstalling them?
If you're running Windows, run the Print and Scan Doctor and include the results.
Is the printer plugged directly into the wall outlet (avoiding power bars and surge protectors)?
Have you completed all Windows/Mac OS Updates?
Have you tried using a USB/Ethernet cable to install the printer instead of wireless, and if so, have you tried a different cable?
If you are installing wireless, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try the installation again.
I look forward to hearing back from you! If you wish to show appreciation for my efforts to help you, please click the thumbs up icon down below!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Satellite L850-1HR and Win7- unable to Install Display Driver

Hello
I reinstalled my Toshiba Satellite L850 notebook with older Windows 7. I installed also all the drivers necessary. After I installed display driver in device manager under Display adapetrs I see message that adapter is not functioning properly because system is unable to load drivers.
On Win7 there is also SP1 installed. I cannot see why drivers are not loaded properly. Does anybody have any idea about what could be wrong ?
Thanks, Mateja

Hi
The Satellite L850-1HR is equipped with an ATI Radeon HD 7670M graphic chip
I assume the ATI driver is not installed properly.
On the Toshiba EU driver page especially in Satellite L850 PSKG8E download area I could not find the Win 7 AT driver.
But I checked drivers available for all L850 series and I found AMD display drivers.
You should do this too. Choose Satellite L850 series (in short model no choose All) in the driver download form and you will get all available drivers for Win 7 and Win 8
The AMD display drivers should be listed too.,.

Unable to install GEAR driver set

When install intunes on my laptop then I got the error report as below:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again."
ALso try to search solution from several forum but this is highlighted with CAUTION because it change registry on system:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
Anyone have other solution to solve this? please help.
Thanks

If you're worried about messing up GEAR, you might try reinstalling it:
http://www.gearsoftware.com/rss/GEAR-drivers-feed.php
Presuming that doesn't help, go ahead and remove it per that article you found, but just backup your registry first, just to be safe:
http://support.microsoft.com/kb/322756

I tried to upgrade iTunes, now it won't install on my computer.

I was prompted to upgrade my itunes to the newest version. I downloaded the new version. It downloaded completely but when it came to setup I got a window saying, "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below. I have no idea what this is or how to get to it. When I press cancel another window pops up saying the older version of itunes cannot be removed contact technical support group. There is no version of itunes located on my computer anywhere. What do i do to get my itunes back?

"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes.msi'
With that one, let's try the following procedure.
First, head into your "Uninstall a program" control panel and uninstall your QuickTime. If it goes, good. If it doesn't, we'll just attend to it when we attend to iTunes.
Next, download and install the Windows Installer CleanUp utility:
Description of the Windows Installer CleanUp Utility
Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any iTunes and/or QuickTime entries in the list of programs in CleanUp, select those entries, and click “remove”.
Next, we'll manually remove any leftover iTunes or QuickTime program files:
(1) Open Local Disk (C:) in Computer or whichever disk programs are installed on.
(2) Open the Program Files folder.
(3) Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion.
(4) Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(5) Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue. (Note: These files may have already been deleted if QuickTime was successfully removed using Add/Remove Programs earlier.)
(6) Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
(7) Restart your computer.
Now try another iTunes install. Does it go through properly now?

I am Unable to install the driver for my Kodak ESP-3 on Windows 7 64 bit

I have gone to the Kodak site and dowloaded and ran the software and Windows is still unable to detect the printer. all the other Easyshare software is successfully installed. Windows is recognising it as a scanner (as it is an printer/scanner
combo 'All-in-One-printer') which works but i can not print. There is no error message other that 'Windows has not installed the drivers successfully' but is recognising the type of device as Kodak EasyShare Aio (camera).
I have Windows 7 Home Preimium 64-Bit SP1.
Please Help.

Hi,
If you installed the All-in-One Printer Software, you may navigate to the following path to open printer configuration:
a. Select Start > Programs (or All Programs) > Kodak > KODAK Printer Setup Utility.
b. Follow the on-screen instructions to set up the printer.
Also, you could contact the KODAK support for further help.
Alex
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to install downloaded driver on my Mac OS X 10.6; therefore printer useless!

I downloaded the HP Deskjet Ink Advantage 2645 driver from the site:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?
cc=gr&dlc=en&lc=en&os=4082&product=5357280&softwareitem=mp-120070-4&sw_lang=&
but, when attempting to install the downloaded driver, I got the message:
HP Deskjet 2640 series cannot be installed on this computer.
Therefore, the newly-bought printer 2645 cannot be used on my Mac. Thank you HP!
END
This question was solved.
View Solution.

Hi PanosKal,
I understand you have a Deskjet Ink Advantage 2645 that you're trying to install on a 10.6 Mac without much luck thus far. I'm sorry to hear this, but I will definitely do my best to assist you.
I believe it may have just been an issue with the download. I downloaded the software package on our 10.6 Mac here and I was able to run the installation, so the software itself is working.
I will direct you right to the download page for the Deskjet Ink Advantage 2645, and please try downloading and installing the software once more. If it still doesn't work, could you please take a screen shot of what happens and then post it here for me? Thank you!
Hope this helps, have a great weekend!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

ITunes won't install "Unable to instal GEAR driver set"

I tried to update to itunes 8 and it gave me this message but then it let me update my iphone to 2.1. Afterwards it then told me that my phone won't work without itunes 8 and now i can't install an older version of itunes. Please HELP! i have no phone now and i desperately need help!

May want to check this out:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

915G Combo Unable to install Azalia Driver in Windows 2000

System:
P4 Processor 520 2.8GHz (LGA775)
Kingston DDR400 512MB (one stick)
915G combo
Powercolor Radeon X300
Lite-On DVD writer SOHW-1653S02C
Maxtor 80GB SATA
C-Media Azalia Audio Drivers cannot be install in windows 2000(Format, new OS). Got the error message hardware was not detected. Already install the Busdriver according in C-media Azalia Driver, sound is OK (2.0 speaker). but cannot install the Azalia driver. I afraid if something might goes wrong in the future if there's no proper driver.
Have no problem with the driver when installing WindowsXP (SP2 direcX9.0c included), but I want to use windows 2000 instead.

I have only install SP3 and SP4 for windows 2000, but haven't update anything as that place got no Internet connection.
I didn't check what DirectX version was included with Win2k SP4, so I'll try to run windows update after this.
Which chipset driver are you mentioning, the Motherboard chipset? If that the case, I already install all the other driver in the MSI Driver CD but stuck at Azalia driver.
I am wondering, is it OK NOT to install Cmedia audio driver? As installing the BusDriver (included in Cmedia driver), sound is OK but I don't want it will arise conflict in the future.

Trying to upgrade to 7.7, unable to install to drive F

Similar Messages

Maybe you are looking for