Trying to use a Blue ray player on my iMac...

I own a sony blue ray player that i am trying to use as my dvd player on my 27 inch imac.  I have a mini display port to hdmi cable that is supposed to work.  It is plugged in but when i press the command+f2 button either nothing happens or i get a beep.  What do i need to do to make this work?

Hey Scottfromnorthport,
Out of the box you can burn and read Blu ray Data discs.
I'm guessing this is not what you are after.
I'm guessing that you want to watch Blu-ray Movies.
OSX does not support this natively how ever there are 2 solutions.
VLC 2.0 has basic Blu-ray support it can be found here VideoLAN - News
Mac Blu-ray player found here http://www.macblurayplayer.com/
Which ever route you go down. It's not quite as seemless as you would hope.
It still feels a bit clunky. and needs a fast processor although you should be good.

Similar Messages

  • Trying to connect Sony Blu Ray player to MI424WR router wired through in-wall connection, help!

    Maybe someone can help me. My house has some pre-wired cat5e plugs in the walls. I have my MI424WR router upstairs and my Sony blu ray player downstairs. I first connected the router and blu ray player to the wall with cat5e cables, no luck. I then tried using a cat5e crossover cable from the router to the wall, no luck. The Sony blu ray player has everything set to auto, but do I need to configure something? Can someone help me figure out what is not working? Thank you.

    AEConfidential wrote:
    Shouldn't the wiring in the wall act like a hub with the router plugged into one wall jack?
    No.  cat5 wiring doesn't work that way.  Unlike phone wiring where all the wires are connected together, cat5 wiring connects point-to-point between two Ethernet devices.  You need a continuous cat5 path from the blu-ray player to the router.  The patch panel merely provides a termination point for each cable. 
    The easiest thing to do to get this working is to take a cat5 patch cord and use it as a jumper from the jack going to the blu-ray player and the jack going to the Actiontec router.  That will give you a continuous connection between the two devices.
    Longer term, if you want to add devices in other rooms that have a cat5 cable, you will need to add a switch as viafax999 suggested.
    http://en.wikipedia.org/wiki/Ethernet_switch
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=30&Tpk=ethernet%20switch&Order=PRICE
    You will need to connect the jack going to the Actiontec router as well as the jack going to each room where you want an Ethernet connection to the switch.  The number of rooms you want active will determine how many ports you need on the switch.

  • HP ENVY 700-074 Desktop - what graphics card do I need to install to use a blu ray player?

    I purchased an external blu ray player - "LG 14x external blu-ray/dvd writer super multi blue be14".  For some reason I thought my system was compatible.  However, it's not - apparently the Intel(R) 4600 won't work.  What graphics card would I need to install to allow using this blu-ray device?  What else do I need to know?

    Ah, I should add, the Blu ray player's support site (for Cyberlink) suggested a pile of different drivers - 30 or 40, but didn't offer any specifics regarding my particular system. What I really need to know is what would be the best option for my particular system.

  • How would I edit and burn HD 3D home movies at 1080i/60i to a Blu ray player on an iMac?

    I own a Sony HDR-TD30V HD 3D Camcorder and would like to edit and burn my 3D home videos (1080i/60i) to a Blu ray capable of playing on a home blu ray player or PS3 using iMac software.

    Well, you won't be doing 3D with Final Cut Express!  (With FCE you could edit 2D filmed with your camcorder @ 1080i60 but not 3D.)
    For that matter, Final Cut Pro X doesn't even handle 3D out of the box.  But there is a third-party plugin called Stereo 3D Toolbox that works with Final Cut Pro X. 
    As for BluRay, you will need an external BluRay burner and software that supports it ... like Roxio Toast Titanium.
    Also, I noticed that your profile says you are using OS X 10.6.8 - I strongly suggest upgrading to 10.7 (Lion) or 10.8 (Mt. Lion) before investing in FCP-X and other video software.

  • Is anyone here using a blu-ray drive on an iMac to play BDs?

    To be able to play blu-rays I consider buying an external drive,
    Windows (which version...?) and 'WinDVD® 9 Plus Blu-Ray':
    (http://www.corel.com/servlet/Satellite/us/en/Product/1189528458632#versionTabvie w=tab2&tabview=tab0)
    Is anyone here who can confirm that this REALLY works on iMacs?
    Thanks!

    OS X cannot play BD movies due to licensing issues, regardless of the drive. However, if you install Windows on your Mac, that can play back BD movies provided you also install properly licensed player software (Windows has no native support for it either).
    The issues relate to how OS X drivers work and meeting the complex requirements of the BD consortium on implementing a playback mechanism that implements all of the DRM limitations and controls required. Presumably Apple is working on it as they've mentioned the difficulty in licensing BD movie playback to the press on several occasions and the consortium themselves have made changes to the licensing procedures as a result.
    Otherwise, BD drives and reading/writing work just fine on OS X.

  • Stream to blu ray player using E3000?

    I have an E3000 with an external hard drive attached via USB with several movies saved on it as ISO's.  Can anyone assist me in trying to figure out how to stream a movie to my wireless blu ray player, Sony S580.  I was able to stream the iso to a netbook attached to the LCD tv by using VLC on the netbook.  The only videos I can access on the blu ray player that are on the external hard drive are home videos I converted to DVD quality before uploading, they're not HD.  I can access pictures and music on the blu ray from the external hard drive as well.  I tried converting an iso to MVK but was unable to access/find it using the blu ray player. 
    Any assistance would be greatly appreciated.

    Steps to stream a movie to my wireless blu ray player
    1. Make sure PC, wireless router, TV, and Blu-Ray player are turned on.
    2. On the Blu-Ray player, go to My Media.
    3. If you haven't previously configured your network on the Blu-Ray player, you will be prompted to. It will search for a network, choose yours, enter the password (if router is secured), and you'll be connected.
    4. Now, the computer will be scanned by the Blu-Ray player for shared folders. Pick the folder (most likely the only folder available for picking) that you put your movies in. Your movies will be displayed in a list for you to choose from, simply pick one and watch!  
    Here is the link as well: 
    http://www.samsung.com/us/support/supportOwnersHowToGuidePopupPrint.do?howto_guide_seq=2666&howto_gu...

  • I am aware that iMacs do not support Blu-ray. However could I use am   a Blu-ray player connected via the audio/optical digital in port to watch Blu-ray on my iMac screen ?

    I am aware that iMacs donot support Blu-ray. However, could I use a blu-ray player connected via the audio/optical digital in port to watch blu-ray on my iMac screen ?

    You could connect a FireWire Blu-Ray drive and use non-Apple player software.
    <http://eshop.macsales.com/search/external+blu+ray>
    <http://www.macblurayplayer.com>
    <http://www.macblurayplayer.com/download.htm>
    <http://www.mcetech.com/blu-ray/>

  • No More Surround Sound on Blu-ray player after Upgrade in MediaSmart

    When I used the Blu-ray player in my home theatre I selected the "HDMI pass through" mode to get surround sound. I came across some new movies that would not play and after the update from HP the player would simply freeze up as soon as there was audio present. I had to go into the task manager to shut it down.
     MediaSmart works fine on the laptop, but it only freezes up when I use the "HDMI pass through" setting.
    I have tried "HDMI pcm" mode and that doesn't work either. The Denon receiver shows there are five channels working but I only get stereo sound out of the front left and right speakers. This would indicate that the Blu-ray player is not outputting in 5.1 surrond sound and that the laptop and the Denon receiver is working fine.
     Hp supports' solution was to reinstall the old driver or try a system restore. I know a system restore isn't going to do anything. The problem is in the new software. The new software did not work on my HDX18 when it was in Vista, it didn't work when I upgraded to Windows 7 and it doesn't on my new dv8.
     I tried contacting CyberLink to let them know that the upgrade is giving problems, but I think they are ignoring me.
     Personally I think that either HP or Cyberlink just forgot to add the drivers for 5.1 and 7.1 surround sound. 
    If someone were to find a solution to this one I would be surprised. I am quite certain I covered every possibility, but you never know.
     Any help would be appreciated.
    Thanks     
    This question was solved.
    View Solution.

    OK, I found a solution. SORT OF. I use the laptop to watch region "B" Blu-ray movies that I buy out of England. Rather than set Media Smart to region "B" I purchased software from SlySoft.com. When the software is running it removes the region code and all that annoying copy protection. Fox is the worst, followed by Walt Disney. (Pixar Animation and Buena Vista) One specific movie that would not play on the old Media Smart software was "Ice Age 3 Dawn Of The Dinosaurs. When I tried, a red window came up prompting me to go to Cyberlink for an update. Of course after that the movie would play, but I had no surround sound in my home theatre.
     So now I use the old Media Smart  software and run SlySoft...no more red window...I have surround sound in my theatre through HDMI pass through.
     The problem with this solution is that Slysoft costs around 114.00$ U.S. for a life time membership and free updates forever. HMMM.

  • Insignia blu-ray player NS-BRDVD3 sound issues

    I'm having issues with sound levels when using the Insignia player.  Sometimes the sound fades and I can turn the volume all the way up on my tv and still not be able to hear it real well.  This is sporadic but only happens when I am using the blu-ray player,  both watching a dvd or watching netflix.
    Has anyone else had this problem?   I have it hooked to a Vizio LCD with HDMI cable.

    I have experienced the same problem with Netflix streaming. It looks like the current "fix" for this problem is to connect with component cables and not a HDMI cable. A firmware solution is aparently in the offing from information I've gleaned from the Inginia forums. Not entirely satisfying, but it has worked so far for me.

  • Connecting a blu-ray player wirelessly

    Hello,
    I am trying to connect a blu-ray player wirelessly and it is asking for my WEP/WPA2 authentication. I know the password for my wireless network, what else do I need and where can I find it?
    Thanks!

    Sorry, I forgot details! The blu-ray player is a Magnavox model number MBP5120F/F7 and it seems like a lot of people have issues connecting with this one ****!
    Also, I am not overly proficient in computer lingo...sorry!

  • Surround Sound Not Working Correctly Since Connecting New Blu-Ray Player

    I recently purchased a Sony VIZIO VBR200W Blu-Ray Player to go with my VIZIO VL420M LCD HDTV, and am having some audio issues.  I have a RCA RT2770 Home Theater System, which is connected to the TV through the audio in/out composite (RCA) audio cables (audio in is to the RCA system, audio out is to the TV).  The Blu-Ray Player and the XBox 360 are connected directly to the TV using HDMI cables.  The problem is the sound coming out of the speaker system is a bit distorted when using the Blu-Ray player.  I've also noticed quite a bit of feedback coming from both the TV speakers and the surround speakers when the TV screen is bright (loading menu's of movies, Netflix Instant Queue, etc.).  I never had any issues with the sound from the 360, which has been hooked up this way since day one.  Any suggestions on how to get the sound to be clearer? 
    OK, now I'm starting to worry that the feedback I got earlier caused some kind of picture quality issues in the TV itself!  Before I make a fool of myself for asking stupid questions, is this even a possability?  Help!!!

    dumb question - but does your rca home theater have an optical input on the back of it? it will look like a trapazoid cover with sometimes the words "audio in"

  • HT204370 If I buy a movie on iTunes and burn it to a DVD can I get to to play in a DVD/Blu-ray player?  I haven't had much luck trying to do so.

    If I buy a movie on iTunes and burn it to a DVD can I get to to play in a DVD/Blu-ray player?  I haven't had much luck trying to do so.

    No you cannot.
    You can only make a backup dvd of your movies, fo use in itunes on yur computer.  You cannot burn a video product to dvd to watch on a dvd player, just as you cannot copy a dvd that you purchase.
    "You shall not be entitled to burn video iTunes Products"
    http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • I get a msg"failed connection" when trying to connect Sony dvd/Blu-ray player to tv

    I have had problems with picture quality on tv. I think it is my very old dvd/vid player, so bought a Sony dvd/Blu-ray player. I continually get a failed connection msg when trying to set it up and connect to the tv.  Have dbl checked all cables etc, and all has been done according to manual.??  Any thoughts appreciated! 

    Hello Wendyd, thank you for your message. Welcome to SONY Community!
    Error: Physical Connection Failed
    Follow the steps below to resolve this error message:
    Make sure the Ethernet cable is securely connected to both the Sony product and the router or modem.
    If the Sony product still does not detect the router or modem, try connecting the Ethernet cable to a different LAN jack (if available) on the router or modem .
    If still no connection is detected, try replacing the Ethernet cable.
    NOTE: The Ethernet cable can be tested by unplugging it from the Sony product and connecting it to the LAN jack on a computer. After turning off any Wi-Fi® option on the computer, try using the computer to access the Internet through the Ethernet connection. If the Internet cannot be accessed, the cable should be replaced.
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. 
    Due to proximity, they are in a better position to respond to your questions or concerns.

  • How do I use my Airport Express with a Blu-ray player?

    Hello, first post, long time lurker. Have a question, hope someone can help me
    I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
    What do I have to set up on the airport express to be able to give the blu-ray player internet?
    I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

    Welcome to the discussion area, mareithree!
    You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

  • My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
    If you can find such a thing.  I really doubt that exists since USB is a data connector not a video connector.
    would allow me to run the audio through my stereo.     
    That would depend on this adapter.

Maybe you are looking for