Trying to use Airport Express (2012) in Hotel and it is not working

Hey folks, the title pretty much says it all. I picked up a new AE last week, and wanted to use while I travel to share out my hotels wired connection to my computers, iPhone and iPad. I am pretty good with networking, so I can't seem to figure out how to get around the double NAT error that I am getting from the Airport utility. It appears that the hotels network is blocking me from connecting. If I use my back up travel router (Zuni Connect) everything works fine. It appears the AE is not getting along with the hotel. Any ideas on how to get around this?

I traveled for years with an AirPort Express and have had virtually no problems connecting to the hotel networks if an Ethernet port is provided in the room.
Up until a few years ago, configuring the Express in Bridge Mode worked just fine, as hotels would allow several devices to connect without problems.
Unfortunately, hotels have become a lot smarter as they look for ways to generate more revenue. Many hotels now will only allow one connection if the Express is configured in Bridge Mode, so I started using the Express in router mode about 3 years ago to get around this.
Security wise, this is actually a bettter arrangement as Tesserax notes, because other users at the hotel cannot "see" your devices.
The Double NAT "error" can be ignored with an option in AirPort Utility if you wish, and the Express will display a nice, green light.
I have no trouble connecting 3-4 devices this way and the hotel only "sees" one device, so they only charge for one connection.
When the hotel only has wireless, that is when I bring out the second Express that I travel with, so I can use one Express to "join" the hotel network and provide an Ethernet signal to the second Express, which is configured as a router to allow multiple devices to connect. The hotel only "sees" one connection this way.

Similar Messages

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

HT201407 I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?

I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work. It says that the sim is not valid, how can I get this unlocked?

You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I want to use Airport Express in my hotel room using the wired internet connection, but I don't carry a computer, just my iPad. Is that possible?

I want to use AirPort Express when I am traveling. I would like to use a wired internet connection in a hotel room to create a wireless connection. However, I do not normally carry my laptop, just my iPad. Is it possible to do this?

You will have to pre-configure the Express using AirPort Utility on your computer before you leave on the trip. The Express will store and remember the settings.
You might want to check with the hotel in advance to make sure that they have Ethernet ports available. Most hotels have switched to wireless and the others are not far behind.

If using airport express on cell network and using only the airplay connected to stereo does it use data allowance if playing music on iOS device " not streaming from net"?

If using airport express to play iTunes music with airplay feature with cell network (hotspot on cell phone) does it use data allowance?

No

On my second Airport Express in 3 months and still doesn't work!

I bought an airport express 3 months ago and it worked perfectly just up until a few days ago. I went thru all the possible fixes and hard resets, changed cables, re-located the airport etc. And all failed leaving me with a blinking amber light. I went to the store that I bought the airport from and they tried hooking it up on their system and they got the same result. They told me I would have to go thru apple to get it looked over. I have a home business and needed this unit to work that day as I depend on the internet. So I said screw it and bought another airport express, got it back to the office and guess what? Yup it also doesn't work either. So what can I derive from this, is it my set up? It worked without any changes to the settings for three months. Is it the unit? It doesn't work in my office or at the shop I bought it from. Any suggestions before I buy another brand.

Ok here is what I suggest:
1. Reset the ISP modem, most can be done by simply pulling the power on the unit and waiting about 10 seconds then plug back in
2. Reset the Express to factory defaults:
Use pen or paper clip to press and hold the reset button for 10 seconds.
3. Open Airport Utility (Do not use the assistant at this time) and set up with the following settings.
Airport
Base Station Tab
- keep all defaults
Wireless Tab
Wireless Mode - Create a wireless Network and keep all else default
-Keep all others default
Access Tab
MAC Address Access Control - Not Enabled
Internet
Internet Connection Tab
Connect Using - Ethernet
Configure IPv4 - Using DHCP
Ethernet WAN Port - Automatic
Connection Sharing - Share a public IP Address
DHCP Tab
DHCP Beginning Address - 172.16.1.200 These addresses are simply examples and default.
DHCP Ending Address - 172.16.1.210
-Keep all others default
NAT Tab
-Keep all defaults
Do not set up any security options at this time, wait until you get the Express operating then you can start to set up WEP, WPA etc. Security
Once you have all these settings configured the press update and wait for the Express to reboot. If you still have a Blinking Orange light then I recommend contacting the ISP and make sure that they have the Expresses MAC address in the data base. Most ISP's will require the MAC address of the unit they are giving an IP address to.
Or you can try to reset the Express by unplugging the Express then while using a pen or paper clip press and hold the reset button while you plug the Express into the AC outlet. Then try setting up the configuration as above.

Airport express Green light on, itunes transmitting, internet not working

Hi,
I have a thinkpad running XP and a cable/telephony modem from comcast. I installed the airport express following the directions and got a blinking amber light and no functioning internet or airtunes. I then took down the IP address, router address, etc (IP Address: 66.30.116.41 Subnet Mask: 255.255.248.0 Default Gateway: 66.30.112.1
DHCP Server: 68.87.71.8 DNS Servers: 68.87.71.226, 68.87.73.242) from my modem and manually configured those settings into my airport express, and now I have a green light and am able to transmit itunes but can't access the internet. My computer connects to the network but then I can't load any pages. When I try "repair," it fails when reconnecting to the network. The IP adress when I'm connected to AX begins with 10.
Any suggestions?
Thanks!
RCC

no answer but same problem as yours. any news on your side ?

HT201343 I tried setting sound to apple tv before mirroring and it did not work. Any other suggestions?

I tried the solution of selecting sound in System Preferences before turning on mirroring and it did not work. Any other settings I need to worry about?

You can only update an app from the AppleID that was used to purchase it.

Like i said Microsoft outlook keeps coming up in my iTunes and a box with server name i ,v tried all the server names on my account and it will not work and now my iTunes account is stuffed

I,m sorry but i,v a enough of all these **** problems Microsoft has been on help with helping me fix this problem i,v tried everything to fix it and i do know that i,m not talking to Apple like i said this outlook from Microsoft keeps coming up every time i start my iTunes up and then it has a box with enter server name and i,v tried all the server names on my laptop and it will not accept any of them I,v spent a heep of money already with computer people and my laptop is now more stuffed and i don,t trust anyone any more my computer bloke stufhfed my iTunes account up as well and tried to tell me i had to upload a new iTunes and i fixed it up and i,v never done a computer coruse in my life sorry for the all the chat but i,m just sick of all the scams just to get money out of you one more thing my iCould is not backing up to my iCloud as well so where is all my dtuff gone to so much for security

Ande i,v got on idea where to see your relpys here this is all new to me like where are your messages here thank you

Using airport Express on a hotel ethernet to create a wireless network

Hi there, yesterday I bought an airport express as I was lead to beleive it was the perfect device and simple to set up with regards to creating a wireless network from a ethernet connection in a hotel room. I seem to get a green light and seem to aquire a valid IP address of 192.168.2.102 and the AE utility doesn't state I have any problems and yet I cannot connect to the internet. I am from the UK and currently in Honk Kong on business for the next few days and desperately need to get a wireless connection sorted. I have read through many of the archives on these forum pages and it is still not certain to me whether I should be using bridged mode or not?
btw, I can connect my pc and get internet access without any problems by ethernet directly into my pc.
can someone advise me of the settings I should use given my scenario (ethernet connection in a hotel room). Given how much tme I have invested trying to get the AE to connect to the internet I would prefer to stick with it and get it workShort rather than taking the Airport Express back to the Apple store tomorrow and moving to a hotel with wireless and not ethernet connection.
Help appreciated
Russellb

Hello, thanks for your suggestions. I have tried setting up the AE using my girlfreinds Win XP computer instead of my vista one and it setup 1st time without any problems. In fact, the options I got presented with were slightly different. Shocked at what a difference installation and setup can be from using a Vista laptop to a XP netbook. Maoin thing it is now working and you were correct about using it in bridged mode so many thanks.
Russyb

Help! Trying to use Airport Express to extend existing network

Computer Illiterate here. I have an Airport Extreme base station and am connected to the internet. I have been trying to extend my network using an Airport Extreme.
I previously had the network set up like this, but after my DSL line was cut, and going through several decades of customer service **** with Verizon to get everything back again, I can't get it all to work together (friend did it for me the first time and is now unavailable).
The problem is that when I open Airport Setup Assistant, it doesn't recognize either the Airport Express or even the Airport Extreme (which is working and I can connect to the internet). In fact there is nothing in the list at all. Reluctant to reset the Airport Extreme because I will then lose my settings I presume. Will I have to create a new network and password and all the rest of it? Barely managed to do that the first time. Anyone have any ideas about what I'm doing wrong? Would really appreciate any help.

Here is a way to set up a network with more than one router.
http://docs.info.apple.com/article.html?artnum=107454

Trying to use Airport Express as access point.

I want to use an AE as an access point to extend my wifi. The location has ethernet. My primary router is a Lynksys E2000. I set the AE up to extend wifi, bridge mode, PW's same as existing network, plug ethernet into LAN of the AE. It reports all is well for about two minutes, then the unit flashes yellow and Airport Utility loses contact. Have tried new ethernet cables, other locations, etc. Resets and power cycles allow me to see the unit again, but the unit always ends up dropping off the network and flashing yellow after a very short time. To be clear, I want to use a wireless device in the location that would talk to the AE that would pass it to the ethernet. I have read the forum Q & A's and tried several of the solutions, but end up with the unit flashing yellow and the Utility asking me if I want to forget the AE. There must be something I'm missing in the setup or the unit is bad. Any help would be appreciated.

I set the AE up to extend wifi
The "extend" setting on the AirPort Express would only be used if it was connected to another router using wireless. You are using Ethernet.
Configure the Express to "create a wireless network" using the exact same wireless network name, same wireless security settings and same wireless network password as your main router.
As a final step, make sure that the AirPort Express is configured to operate in Bridge Mode.
Power down both the main router and Express after the AirPort has been configured. Then power up the main router first for a minute or two, then power up the Express.

Trying to use Airport Express to extend network created by Actiontec M1424WR (FiOS)

I would like to use two Airport Expresses to extend my home network which is created with my Actiontec M1424WR. My ISP is Verizon FiOS. I previously had TimeWarner and used one of my Expresses to create the WiFi and the second Express to extend it. Now that I have a modem/router provided by Verizon, I'd like to utilize both Airports as extenders. I have a two story house and the signal is "fair" upstairs. I would like to use my Roku player to access my home library via Plex. My problem(s):
I used a hard reset to restore my Expresses to the default settings because my Airport Utility could not find them and my old network is not active anymore. After the reset I was able to find them but I kept getting an "unexpected error occurred try again later" message. After this message my Macbook OS X 10.8.5 could not connect to the internet anymore. I had to go to System Preferences ---> Network ---> Assist Me.. ---> Assistant ---> and then found my network and reconnected. So my Macbook is connected again but my Airport Expresses sit unused..
My Network:
Modem/Router ->     1. PC
                               2. PC #2
                               3. Xbox
                               4. D-link 5 port gigabit switch -> a. Directv b. xbox #2 c. xbox #3   d. THIS IS WHERE I WANT MY AIRPORT
I would like one Airport, connected via ethernet and towards the back of the house, extending my network and the other, connected via wifi and upstairs, also extending my network.
If anyone has time on their hands to help me with my problem I would greatly appreciate it.
Thank you,
Mike

I followed Kappy's advice and connected one AEX to my modem/router using a 50ft ethernet cable, creating a new network.   I connect my second AEX wirelessly to the first, extending the network. The first AEX was placed towards the back of the house and the 2nd AEX was placed upstairs. I was able to stream netflix on two devices upstairs while streaming a movie using plex from one pc downstairs to a roku player upstairs without any buffering at all. All three were in HD and my brother was playing multiplayer on his xbox (wired). It works! Thanks Kappy!

Is it possible to use Airport Express as a repeater and as an airplay device at the same time?

Hi,
I am using airplay with airport express stations in combination with conventional speakers for my home entertainment. Works great. Only thing is that I have a massive block of concrete in my flat. Is it possible to use one of my express stations as a repeater and at the same time as a streaming device for airplay? Thanks!

Sure it works only with apple routers? Cause than I could stop trying.
Yes, it's proprietary like everything else Apple. You could look at this:
http://www.amazon.co.uk/dp/B006BBYXPA/?tag=hydra0b-21&hvadid=9550946469&ref=asc_ df_B006BBYXPA
I have had great success installing these for BT Home Hubs and VM Superhubs.
@JoeMY - If it is "joined" to the FritzBox then it won't work, it only works with Apple routers connected via Ethernet or as the main router.

Trying to use Airport Express (2012) in Hotel and it is not working

Similar Messages

Maybe you are looking for