Trying to use Airport Extree in Time Capsule nned error code help

I am a log time apple supporter but I have been messing with this since last night trying to get the @^#&# thing to work. I got conencted erlier to the internet now when i come back from dinner i can;t connect and and i get error code 6765. Earlier i got a message somethinga bout a bios but i did nto write it downa nd now can;t get it to produce it.
Can;t they ever make anything that works the first time out of box for us older non techy guys.
HELP
Dan

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

Similar Messages

Trouble to use Airport Extreme and Time capsule

Hello,
I need help to solve a problem.
I'm using Time capsule and I try to install Airport Extreme to extend my network and to connect a USB printer. Time capsule is working perfectly and Internet works. But here are the troubles.
When I install Airport Extreme, I write my network password and after a reboot, Airport light turns green and can be seen in airport utility. But it doesn't keep on going.
When I want to check my configuration, airport extreme can't be reached. Printer doesn't works. Once I open again airport utility, airport extreme is not present in the left panel anymore.
Thank you for your help.

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function?

How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

Use Airport Express as Time Capsule

Dear All, I am currently using the 13 inches MacBook Air, and I am planning to get a wireless backup device, I am thinking that can I just use an AirPort Express and use the USB port at the back of the AirPort to plug with my Western Digital External HDD? I mean like can I use it like a Airport Time Capsule, becasue I am Just a student I dont want spend too much on a Time Capsule, Thanks Guys

An Extreme is possible although Apple only considered the newest AC model suitable for Time Machine.
An Express does not support a hard disk. It is underpowered and uses 100mbit ports anyway so it is too slow.
Even with the new Extreme people sometimes find the old problem of corrupted backups keep happening.
See http://pondini.org/TM/Airport.html
The disk should be plugged directly into the Air.. the backup will be faster and more reliable direct to the disk.

Using Airport Express with Time Capsule

Simple question. We use Time Capsule primarily for WIFI. I have an express and want to use it only for playing my itunes music through our stereo. My Time Capsule works beautifully, but the express flashes amber when I connect it to a power source and our stereo. How do I get the two to work together simply. I don't care about extending our network or anything fancy. I just want to listen to good music.

You'll need to "hard reset" the AirPort Express by holding in the reset button until you see the amber light start to blink more quickly. Release the reset button when you see this occur.
Temporarily, position the AirPort Express near the Time Capsule and connect an ethernet cable from your Mac to the AirPort Express. Then open AirPort Utility and click Configure to follow the guided setup process. When asked how you want to configure the Express, you will choose the "Join a wireless network" option.
After you have completed the setup and updated the Express to save your new settings, you can disconnect the ethernet cable and move the AirPort Express to the desired location.

Trying to install AirPort Utility on Vista laptop, get error code 2318

Error code pops up during installation saying
"The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318."
Anyone familiar with it? Need help setting up Express to Vista laptop because keeps flashing amber. Thanks!

After investigation the complete error message from Windows is:
Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 10005
Date: 24-Nov-07
Time: 18:12:48
User: INTL\hdevilmorin
Computer: HLVI-X1
Description:
Product: AirPort -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318. The arguments are: C:\Program Files\dns_sd.jar, ,
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 36 43 46 43 46 39 46 {6CFCF9F
0008: 44 2d 46 33 42 38 2d 34 D-F3B8-4
0010: 34 34 38 2d 39 37 39 34 448-9794
0018: 2d 35 44 42 42 33 45 36 -5DBB3E6
0020: 39 45 42 34 34 7d 9EB44}
So I have copied the dns_sd.jar file in the C:\Program Files\ folder (found in a Bonjour folder) and relaunched the installation. Then miracle! It worked. So as weird as your experience!

Conflicts with Airport Express and Time Capsule

I am using Airport Express and Time Capsule at the same time. Connection to the web is via a router. Very often I do have conflicts. How shall I connect the gadgets? At the moment I connect the router to Airport Express (network cable).
Time machine back up doesn't work properly.
Is there anybody able to help me?
Regards

What broadband type do you have?
It can be impossible to plug a TC into the existing connection because the virgin media router has special setup or logins which are not revealed to end users.
If it is a fibre connection for instance the TC may simply not work. They have issues with many fibre ISP putting the gateway address outside the subnet of the main public IP.. (don't worry if it is too technical .. it amounts to .. it don't work! )
You may need to wait until Sat.
Get in a big supply of home videos or something and try and starve off your addiction.

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

How shall i do it ? Complex question about how to use the airport express or time capsule ?

Hello All,
Right now i have an access point:
1/ A mercury router (cheap and old)
2/ Airport Express
Do you advice me to use it to replace my cheap old router (mercury) or to pair it with this main old router ? (however i tried to without any success)
3/ Time Capsule
Can i use it to relay the signal from the Airport Express to extend the range of the wifi?
Can i use it to stream music to my B/W M1 speakers directly ? (I will connect by USB the BW M1 to the time capsule) and would like to be able to play music this way. Is this in anyway possible ?
Many thanks for your reply !

ok, i might be wrong but here goes:
you should attach your modem to your time capsule: your time capsule will act as not only your time machine but also your main wireless transmitter.
you set it up using "Airport Utility" which is inside the "utilites" folder, which is inside your applications folder.
this connects your mac wirelessly to the internet.
to stream music to your speakers you then set up the airport plug to (a) join the existing network (which you set up on the time capsule) and then (b) set it up to stream music to your speakers. again, this is done using "airport utility". do it AFTER you have set up the time capsule.
you will then be able to use itunes to stream music to your speakers. from itunes on your computer you will be able to chose from the bottom right hand side of the window whether you play the music on your computer or wirelessly into your B+W speakers...
some notes:
1. you won't be able to connect the airport plug by USB to your speakers as the airport plug doesn't have a USB output. It has only analogue and optical.
2. although your time capsule has USB you cannot stream music into it or through it. there's some basic guidance here:
http://www.apple.com/wifi/
3. you may find that the sound quality [if you are playing apple lossless files or wav files) isn't as good as if the speakers were connected directly to your mac via USB. this should be especially noticable because your speakers are so good!
if the music you play is only mp3 or the stuff purchased from itunes then it shouldn't make too much of a difference.
4. keep an eye out on the B+W website: there may come a time when you won't even have to use the airport plug, and you will be able to stream music straight to the speakers. i know that B+W have just done that with the new Zepellin speaker that they make.
hope this helps...

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image "/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX's MacBook Air.sparsebundle" is already in use." Same time capsule has worked in the past.

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.

First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

Want to us my time capsule model A1409 as only backup. 2 TB hard drive.
Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
Have tried all of passwords can think of and none work.
Held the reset button for one second on back of capsule and do not see if anything happened.
What a conundrum.
Appreciate any help to get this working.
Thanks,
John R

I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
Mine is wiredup thus;
Eth cable from iMac to modem (not the WAN port should you have one), then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
Alan

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

Will signal strength or internet speed suffer when using a Generation 1 Time Capsule and wireless extending a network with a Generation 5 Airport Extreme

I have a wireless network in my home and I have a Time Capsule 1st generation and a Airport Extreme 5th Generation, will this cause my internet to be slow or have glitches with signal strength?

We've gone over this in the other thread.
If the Time Capsule will be connecting using wireless only, everything depends on the quality of the connection between the AirPort Extreme and Time Capsule.
The quality of the connection will be affected by the distance that the Time Capsule is located from the AirPort Extreme and any obstructions in the signal path.
If you have a ceiling between the AirPort Extreme and Time Capsule, then you should expect the signal arriving at the Time Capsule to have lost 30-40% of its bandwidth (speed). So, the Time Capsule can only repeat the weaker signal that it receives.
Other walls or other obstructions like heavy furniture, large mirrors, etc will also affect the wireless signal as well as cordless phones and other wireless networks around you.
If you are lucky enough to have line-of-sight between the AirPort Extreme and Time Capsule, then the wireless connection between those devices can work quite well. Few of us have this luxury, and must settle for significant compromises in performance.
If the wireless connection between the AirPort Extreme and Time Capsule does the job for you reliably, then you can leave things as is. If you are not getting the reliable performance that you need, then you will need to establish a wired Ethernet connection between the AirPort Extreme and Time Capsule.
As you might imagine, there is virtually no signal loss in a wire, even up to 300+ feet or 100 meters.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

Trying to use Airport Extree in Time Capsule nned error code help

Similar Messages

Maybe you are looking for