Trying to use an SPA3102 to connect a SIP and non-SIP Telephone System

I have a new Mitel 3300 system which is working very well, but for 12 months or so ( until I can replace it with another MITEL ) I need to connect it to an old INDEX system.
I have got an SPA3102, and for the moment it is connected to an extension on the INDEX and a phone, which I will be replacing with an analogue trunk once testing is complete.
The SIP portion is giving me a huge headache. The MITEL side is nice and easy, poking the right range of extensions to a SIP gateway won't take long
The SPA3102 is a real pain, the Manual I have for the SPA just seems to list ranges of values and does not seem to show how to configure it to talk to my MITEL, I can't work out how to get it to make SIP calls across the ethernet interface at all.
Can anyone help, or perhaps provide a decent guide on how to do this.

Headbolt wrote:
This is what I want to achieve.
From the MITEL, when you dial a 4 digit extension 47xx the MITEL will make a SIP call to the SPA3102, which will then in turn use the port that is plugged into an INDEX extension to make an internal call on the INDEX to extension 47xx.
You will be using the pstn tab and the voip-to-pstn gateway on the SPA3102. There are two different ways you can configure the SPA3102 for the voip-to-pstn gateway.
One way is with no authentication and the Mitel will send a call to the sip uri represented by the userid@ipaddress: port_number and the SPA3102 will return a dial tone to the caller and the caller will then enter the INDEX extension they wish to dial.
The other way is with http_digest authentication where the Mitel system will send a Sip Invite to the SPA at the extnumber@ipaddress: port number with the INDEX extension to be dialed and will respond with the authid and the password at the appropriate time.
Without a personal understanding the capabilities of the MITEL system to send and receive sip calls I can't give more specific instructions.
From the INDEX when we dial a 4 digit 65xx, the INDEX will send the call out an Analogue trunk that is connected to the SPA3102 which will then make a SIP call to the MITEL which will ring it's extension 65xx
The forwarding of the call from the INDEX system, after it is answered by the pstn-to-voip gateway of the SPA3102 is done thru the appropriate dial plan of the 3102. If the INDEX system is sending the dial digits after the 3102 pstn-to-voip gateway answers the call then the call will be sent to the userid and ip_address in the proxy/userid on the spa3102's pstn line tab.
Without a personal understanding of the capabilities of the MITEL system to send and receive sip calls I can't give more specific instructions.

Similar Messages

HT201303 last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

last time i bought apps by using visa gift card so iam trying to use the kind of visa gift card and the system is denying the method payment ....any idea how to solve this with my itune account ?

A few reasons I can think of, but instead of shooting in the dark, lets check with experts who can look at your account.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

HT201195 I entered the code for my gift card but I never used it,now I'm trying to use it but it's no there and doesn't let me redeem the code again. What can I do?

I entered the code for my gift card but I never used it,now I'm trying to use it but it's no there and doesn't let me redeem the code again. What can I do?

An iTunes gift card can only be redeemed once, you can't enter and redeem its code again. Since you redeemed the card you haven't bought anything (including IAPs and auto-renewing subscriptions), and your account doesn't show a balance ? You've tried logging out and back into your account and seeing if it shows then ?
My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to). If the balance is zero then it might not be shown.

Use GLC-T to connect ucs 6120 and 2960s (RJ45),.have SFP validation failed problem

hi,every .
i use GLC-T to connect ucs 6120 and cisco2960s (RJ45),.have sfp validation failed problem.
I have done speed to 1G then I am getting error " link not connected" even I have connected the nnetwork cable..

UCS6120-A(nxos)# show interface e1/7
Ethernet1/7 is down (SFP validation failed)
Hardware: 1000/10000 Ethernet, address: 0005.73d2.934e (bia 0005.73d2.934e)
Description: U: Uplink
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
auto-duplex, 1000 Mb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped never
Last clearing of "show interface" counters never
30 seconds input rate 0 bits c, 0 bytes c, 0 packets c
30 seconds output rate 0 bits c, 0 bytes c, 0 packets c
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
RX
0 unicast packets 0 multicast packets 0 broadcast packets
0 input packets 0 bytes
--More--

HT204053 I am trying to use the app store on my iphone5 and it says my apple id had been disabled

I am trying to use the app store on my iphone5 and it says my apple id had been disabled

Apple ID security issues -
Account security issues almost always require you to speak directly to an Apple representative to securely establish your identity as the account holder. You can set it up so that Apple calls you, either immediately or at a time convenient to you.
1. Go to www.apple.com/support
2. Choose Contact Support and click Contact Us
3. Choose Other Apple ID Topics and choose the appropriate topic for your issue
4. Follow the onscreen instructions

When trying to use sharing, I get Connection Failed

When trying to use my OSX 10.75 laptop to access files on my OSX 10.6.8 laptop it says "Connection Failed". In the console, it says:
Finder: SharePointBrowser::handleEnumerateCallBack returned -6600
File sharing is turned on in the target computer. I have a user account setup for file sharing. That user account has read/write access setup.
I have tried to turn off sharing and turn it back on.
I have tried to remove the shared folders, make new folders and then share those new folders.
I have tried both guest access as well as access with a specific user account.
Nothing works. I get the error message above no matter what I do.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HELP PLEASE!!! I'm trying to use my Apple TV in a dorm and it is just not working

I used this Apple TV at my house and it worked fine. Today, I brought it to my dorm and I don't know what's wrong. Everytime I try to turn home-sharing on it tells me "The Apple ID you have entered cound't be found or your password was incorrect..." I have typed the correct information in there 10 times and it refuses to work.
I am also unable to access Netflix, Hulu, Youtube, everything. The only 2 icons on the home screen are computer and settings.
I have a slow internet connection so I turned my video resolution down, and that did nothing.
I plugged in an ethernet cable and that did nothing.
I reset the entire system and that did nothing.
I have restarted this thing a dozen times and nothing has happened.
HELP ME!!!

What do you mean by dorm, if you are at college and use a communial service you need to have a word with the network administrator, their system may be blocking it. Or it may need to sign in to the network using a web page which the Apple TV can't do.

My TV has one Hdmi output. Can I use a splitter to connect apple tv and my direct tv DVR

Can I use an hdmi splitter to connect apple tv and my direct tv DVR? If yes, Any suggestions on a good splitter that doesn't cost too much ($40 at most).

I would get an HDMI switcher and plug in the ATV directly
I just posted this as an example, not sure of your location.
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1318214572&sr=8-1

I have an Iphone 4s that I installed the face button app. After trying to use the first time, my phone locked and stopped working. Does anyone knows how to fix that problem or how to reset this phone?

I have an Iphone 4S that i installed the face button app. After trying to use it, my phone locked and I cannot get it to work anymore. does anyone knows how to reset this phone and get it working again?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

I'm trying to use my bluetooth for the first time and I'm having trouble connecting to my vehicle. My data control in my vehicle asks me for a 4 digit security pin. I have no idea where to find this. Any suggestions?

Does anyone know where to access my 4 digit security PIN from my iphone 4?
I dont ever recall programming a PIN into my phone.
I need it to pair up my bluetooth with my vehicle audio system.

Hi there,
the 4 digit pin is usually default to 0000 or 1111.
If pairing, it can also be anything you choose, providing that you enter the same 4 digits into both items to pair.
Good luck!

Trying to use Zoom Q2HD in USB MIC mode and it crashes GarageBand and the whole Ipad?

I bought the Zoom Q2HD video recorder to use for video and because it can be used at a USB Mic for iPad. I recently bought a camera connection kit and last night tried to get the Zoom to work as a mic but it would either not work at all or it would crash GarageBand and the ipad and take me to the Apple logo as it restarted the iPad.
Any ideas?

From the podcast link on the Garageband help page:
"Attach your preferred audio interface and a microphone to your Mac, or use your computer's built-in microphone. (Note: The iSight camera is not supported as a microphone input in GarageBand.)"
http://www.apple.com/support/garageband/podcasts/

Can't use internet with bluetooth connection between iPhone and macbook

My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?

jeb wrote:
My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?
Basic question: Do you have a tethering plan with your carrier? It isn't automatically provisioned; you have to ask for it and pay extra with most carriers. See these tips from Apple:
iOS: Understanding Personal Hotspot
iPhone: Troubleshooting Personal Hotspot

I am trying to use My Messages on my Verizon Ellipsis and I get the message that says mobile number (tablet) doesn't have permission to send messages. How can I change this?

How do I give permission to my Verizon Ellipsis tablet to send messages - in order to use My Messages?

Hello AdamsFamily04,
Staying connected with all you devices is important. I am here to help you connect your Verizon messages with the tablet. Verizon Messages on the tablet needs to be associated with your mobile number to configure the messages. When the message prompts you for a number, use the mobile number you want to link it with and you will be ready for use.
YareliM_VZW
Follow us on Twitter at @VZWSupport

I tried to use a different card for my membership and now it won't renew

My wallet got stolen and in my wallet was the card that I originally had used for my membership. I had to cancel that card, so when my new card got here i tried to renew my membership just using my new card number but every time i enter the new card number it won't save it. I tried using lightroom again and it says that I still need to renew my membership even though i've tried numerous times.

You need to add a valid payment method to the account. An iTunes gift card can be added.

Using a TCP/IP Connection to REQUEST and RECEIVE data from a iDRX Signal Conditioner through a EIS-2B Server

First let me say that I am new to labview, please bear with me. I want to use Labview to querry a iDRX thermocouple signal conditioner using tcp/ip. The signal conditioner is wired to a EIS-2B server. The server is at 198.162.10.53 and port 2000. The data request command is *10x01\r and the expected data to be returned is 01X01+00064.6 (or whatever the actual temperature is). The conditioner and server are working and testing correctly using the iDRX supplied software.
My attached vi runs, creates no errors, but returns no data either. I can find many examples of how to set up a listener, but I need to QUERRY and then RECEIVE the data.
Thanks in advance.
Attachments:
Alyeska 4.vi ‏15 KB

Hi Alyeska! Welcome to the forums!
I took a quick look at the VI, and I have four quick suggestions for
you that may give us some information about what is happening.
You may be experiencing an error that just isn't detected by the VI -
normally we add an error handling VI at the end of program execution to
report any errors that occurred. Also, it's helpful to have a way
to exit the while loop so that the program can finish executing if an
error occurs. Third, you may need to introduce a delay between
the query and the read command to allow the server time to process and
respond to the request. Lastly, if you already know how long the
return message will be, you should wire this length to the Bytes to
Read input of the TCP Read VI so it knows to return the data once it
receives that number of bytes. I've attached a modified version
of the VI incorporating these - give this a try, and let us know if you
still see an error, and if so, what error. Also, if you haven't
taken a look at it already, there are excellent resources for learning
LabVIEW at the LabVIEW Fundamentals page - it's a great way to introduce yourself to LabVIEW and get up to speed quickly.
Cheers,
Matt Pollock
National Instruments
Attachments:
Alyeska 4.vi ‏19 KB

Trying to use an SPA3102 to connect a SIP and non-SIP Telephone System

Similar Messages

Maybe you are looking for