Trying to use AX as an extender and wired point but can't seem to make it work, help plz

Hello,
I'm currently using a ISP supplied huawei HG8245, and using an AX to supply the lower floor satellite receiver with a wired connection and was also hoping to use it as a range extender for the huawei, but failed so far the wired point is working, and light is green, but as soon as i flip it into "extend wireless network"  it goes yellow with the error that it cant extend the netwrok.
i tried looking around the huawei set up but cant seem to find the equivalent of "allow network extension" but so far nothing is coming up.
i would appreciate some help...

Unfortunately, Apple's "extend a wireless network" appears to be a proprietary function that will only work among Apple routers, if you are trying to extend your network wirelessly.
Another way of saying the same thing is that you need to have two Apple routers on the network to be able to "extend a wireless network".
Here is what Apple's product literature for the AirPort Express says about this subject:
Extend an existing Wi-Fi network’s range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express
Ironically, the AirPort Express will "join" virtually any wireless network and the Ethernet port is enabled in this type of setup. But, the AirPort Express will not provide any additional wireless signal coverage when it "joins" a wireless network.

Similar Messages

  • I have the new iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to get it to work....

    I have the iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to do it, any suggestions??

    Make sure you have selected to sync your entire library, or have checked the songs you want to sync.  This might help: http://support.apple.com/kb/ht1351

  • I have a generation 3 ipod 80 gig.  When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it.  I can't seem to make this work  I have reset the ipod, reloaded itunes all to no effect.  Any ideas?

    I have a generation 3 ipod 80 gig.  When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it.  I can't seem to make this work  I have reset the ipod, reloaded itunes all to no effect.  Any ideas?

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Trying to use hangouts for sms on verizon droid maxx but "can't compose"

    I'm trying to use hangouts for SMS on my Verizon Droid Maxx but the message "Can't compose. No default SMS app." displays when I try to compose (+") a new message, even though the top of the screen says that "Hangouts is your SMS app".  What do I need to do?

        Good Afternoon, dgcaskey,
    I love my Hangouts application. Let's see if we can get this up and running for you. Have you been able to use this application before? Or did you just installed this app onto your phone? Have you been able to delete the application off the phone and redownload it? When you receive a text message does it come in through the Hangouts app or the normal stocked application that is on the phone? Please keep us posted.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • Please help! Can't download my apps to my new iPhone 5. I used iCloud in new iPad and no problems but can't do it in iphone5

    Can some one explain to me how to download apps from I cloud to iPhone 5? I was able to do it effortless in my new iPad but can not innew iPhone 5. Tks

    Yes, when you restore as new everything will be wipe from your phone.
    You will need to sync with itunes http://support.apple.com/kb/HT1386  to get back your apps/music and contacts IF you sync with a program in itunes.
    I suggest you import your pics to your computer http://support.apple.com/kb/HT4083  then after you restore your phone, you can sync it back to your phone.

  • I am trying to use my usual e-mail address for Cloud but it is not being accepted. Any help?

    I understand that I can use my usual e-mail address for Cloud but when I enter it, it is not accepted. Any ideas why?

    Hi gms12286!
    This article should be able to help you achieve this goal:
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I can't seem to make a working profile to connect to office 365 on a windows 7 pc with only the mapi cdo runtime version 6.5.8320.0 installed using mfcmapi nor programmatically

    Hi,
    I have been struggling with this for a few days now.
    i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi (HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail) .. it is.
    I downloaded the lastest version of mfcmapi, which i believe was the version of december 2013
    but i can't seem to create a profile for office 365 in it. I followed http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx and then i changed the properties to what was proposed here http://blogs.msdn.com/b/dvespa/archive/2013/07/15/create-profile-connect-mfcmapi-to-office-365.aspx
    That did not work, i keep getting an error one ore more properties are invalid when i try to use that created profile to connect to office 365 (from within mfcmapi).
    I also changed some of those proposed values to what autodiscover was telling me like setting PR_PROFILE_RPC_AUTH_PACKAGE to RPC_C_AUTHN_ANONYMOUS which should be the value $8000F001 instead of RPC_C_AUTH_NONE (at least i think so)
    I builded a simple program to encrypt my password using CryptProtectData and entered the value using mfcmapi in PR_PROFILE_AUTH_PASSWORD as was suggested in the last page.
    but nothing seems to work, i keep getting wrong configured errors and i'm totally clueless atm. This is supposed to work right on a pc where outlook is not installed ?
    I also tried this on another pc where outlook 2010 is installed and i am able to create the profile there and connect without a problem given that i enter the logon credentials once and let them be remember (they get stored / cached in the windows key store,
    like when using CREDWRITE function) from then on i can connect without a problem.
    also when calling configuremsgservice on the EMS service i created for a new profile in mfcmapi and let the UI show i can see on the pc where outlook is installed in the UI options to enter proxy information however when i do the same thing on the pc
    where only the mapi cdo runtime is installed i do not see any UI option to configure the proxy server information ... is this normal ?
    Hopefully someone can shed some light on what i'm doing wrong or might be wrong.
    Thanks in advance
    Willems Davy

    The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • TS3276 PostBox and iCloud - does anyone use pop mail for postbox and icloud? i can't seem to use my MAC pop mail with postbox.

    Apple policy of reseting each time you forget an Account ID or Password makes it impossible for me to keep track of my many accounts on Mail. I decided to use PostBox and it's working great except for one account.  That account is linked to icloud.  I'm not too happy with icloud, in general, but I do want to be able to track my mail on my iphone for that one account (my business account).  It used to be that I could use 2 accounts with one - using an alias.  Now, I can't do that with icloud, nor can I get it linked to PostBox.  Does anyone know what I should do? Am I asking the wrong questions?

    I am now on Chapter 3 & 4 -  Since this is the ONLY message board I can get into,
    & Roger, No, I never had a "mobile me account", if that's a cell phone - wouldn't own one! - IF it was from the Old Tiger mail Ap, I do believe it was discontinued, when they came out with Snow Lion, no? So that's defunct.  FYI I got my first computer in 1991 - DOS, good stuff, easy to fix. My first mac in 2006 Tiger, great stuff, loved it. Then Snowleopard, not sure when, maybe '09? it was just before Lion came out, didn't know the new one would come so soon. & in June 2012, first mac crashed, lost a year "unsaved" data.
    Q # 1. I can't get into My Account - to get into support & any questions! Somehow all my data is messed up, & I've had to change passwords 3 times today every time I'm "rejected" by my account. I seem to have 3 accounts now, each with a different name Password, & Security Questions! & I've been rejected due to: "Incorrect ID name", "Incorrect Password" & because whatever - doesn't" recognize my birth date" / or "my Security question answers" that I chose - all of which I know are correct. AGUH!
    My latest problems:
    1) Can you Unzip iPhotos, uploaded from a USB or External Drive (after my SL crashed)? The dpi for these old ones is about 250 x 360 (88 KB) compared to 2448 x 3264 (2.6 MB) for recent ones.
    - Do you need a program to do this? Some say there's a "free" program, any good? Can unzip be done to many or 1 at a time? Or is there something I haven't found in iPhoto '11, 9.2.1 (Lion)?
    [I now buy new Camera Memory cards & don't delete the photos anymore, since I lost so many.]
    2) Can I combine all 3 of my Apple ID info - or at least delete that 4 year old Email address in my profile? (IF I can ever get in. I wrote a "suggestion" to the Apple folks, who said my new Email was on it, & they'd send me an email - but I never got it, guess it went to the old one?

  • Trying to find specific effect in AE but can't seem to locate. Vid example available.

    There is an effect used extensively in this video: http://vimeo.com/4803532
    Notably at 0:56 and 2:45. It is a repeating effect. I have used it before in AE a while ago but can't seem to figure out how to do it again. If someone could please just direct me to where it is and what it's name is you would really make my Christmas Eve.
    Thanks guys.

    Echo is it! Hiding in the time tools. I guess that makes sense. Thanks for the help yet again Mylenium!
    -Red-Mike

  • I am trying to uninstall an earlier version of itunes and get the following error, "the feature you are trying to use is on a network resource that is unavailable" can anyone help

    Hi I am trying to uninstall a previous version of itunes or download a newer version and I get the following error message "The feature you are trying to use is on a network resource that is unavailable" can anyone help please?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

    There is no more LiveType with Motion 5.  You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

  • After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad. I need help

    After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
    Please help!

    After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
    Please help!

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

  • I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller.  Can I do this with anything in Mainstage?  I also have Line 6 Pod farm 2 - anything in there?

    I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller.  Can I do this with anything in Mainstage?  I also have Line 6 Pod farm 2 - anything in there?
    The foot pedal also seems to have an on/off switch that activates when it's depressed all the way.  How do I set that up in Mainstage?  Can I cycle between and effect and a volume pedal, for example?
    Mainstage version is 2.1.3
    Thanks for all help given.

    Hi
    Bruno Filipe wrote:
    Thanks for the help but please don´t duplicate the answers. I´ve explain that to Chamie7
    Noted, except that the OP clearly did not feel that your answer was helpful
    Chamie7 wrote:
    Sorry, no help there.  Any guitar players know what I mean?
    and
    Bruno Filipe wrote:
    You can use a keyboard or other controller (with jack like sustain) and then assign controller (normally 64) to what you want Mainstage to do.
    This is unlikely to work if you plug an "Expression Pedal" such as an FC7 into a "Sustain Pedal" socket using MIDI CC64, which usually operates as a switch rather than a continuously variable value.
    If I understood the OP's request correctly, the OP wanted to use the FC7 as a "Whammy Pedal", which does a PitchBend 'dive' effect (amongst other things)
    http://en.wikipedia.org/wiki/DigiTech_Whammy
    CCT

Maybe you are looking for