Trying to use cable internet with os 9 i Mac
i dont know how to config. this older imac to use its ethernet port to go on line can any one help...it keeps looking for a phone line ...do people still have those in their houses?
Use the Internet Setup Assistant.
The assistant will help you set up your networking software
50517- Mac OS 9: How to Connect to the Internet
Similar Messages
-
Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?
I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service. -
I'm trying to use kerberos V5 with ActiveDirectory but get an error
I'm trying to use kerberos V5 with ActiveDirectory im using simple code from previuos posts but
when i try with correct username/password i get :
Authentication attempt failedjavax.security.auth.login.LoginException: Message stream modified (41)
when i try incorrect username/pass i get :
Pre-authentication information was invalid (24)
Debug info is :
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Kerberos username [naiden]: naiden
Kerberos password for naiden: naiden
[Krb5LoginModule] user entered username: naiden
Acquire TGT using AS Exchange
[Krb5LoginModule] authentication failed
Pre-authentication information was invalid (24)
Authentication attempt failedjavax.security.auth.login.LoginException: Java code is :
import javax.naming.*;
import javax.naming.directory.*;
import javax.security.auth.login.*;
import javax.security.auth.Subject;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.util.Hashtable;
* Demonstrates how to create an initial context to an LDAP server
* using "GSSAPI" SASL authentication (Kerberos v5).
* Requires J2SE 1.4, or JNDI 1.2 with ldapbp.jar, JAAS, JCE, an RFC 2853
* compliant implementation of J-GSS and a Kerberos v5 implementation.
* Jaas.conf
* racfldap.GssExample {com.sun.security.auth.module.Krb5LoginModule required client=TRUE useTicketCache=true doNotPrompt=true; };
* 'qop' is a comma separated list of tokens, each of which is one of
* auth, auth-int, or auth-conf. If none is supplied, the default is 'auth'.
class KerberosExample {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY",
new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = (String[])origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389/DC=isy,DC=local");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
Attributes aAnswer =ctx.getAttributes( "CN="+ sUserAccount + ",CN=Users,DC=isy,DC=local");
NamingEnumeration enumUserInfo = aAnswer.getAll();
while(enumUserInfo.hasMoreElements()) {
System.out.println(enumUserInfo.nextElement().toString());
// Close the context when we're done
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}JAAS conf file is :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};krb5.ini file is :
# Kerberos 5 Configuration File
# All available options are specified in the Kerberos System Administrator's Guide. Very
# few are used here.
# Determines which Kerberos realm a machine should be in, given its domain name. This is
# especially important when obtaining AFS tokens - in afsdcell.ini in the Windows directory
# there should be an entry for your AFS cell name, followed by a list of IP addresses, and,
# after a # symbol, the name of the server corresponding to each IP address.
[libdefaults]
default_realm = ISY
[domain_realm]
.isy.local = ISY
isy.local = ISY
# Specifies all the server information for each realm.
#[realms]
ISY=
kdc = 192.168.0.101
admin_server = 192.168.0.101
default_domain = ISY
}Now it works
i will try to explain how i do this :
step 1 )
fallow this guide http://www.cit.cornell.edu/computer/system/win2000/kerberos/
and configure AD to use kerberos and to heve Kerberos REALM
step 2 ) try windows login to the new realm to be sure that it works ADD trusted realm if needed.
step 3 ) create jaas.conf file for example in c:\
it looks like this :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};step 4)
( dont forget to make mappings which are explained in step 1 ) go to Active Directory users make sure from View to check Advanced Features Right click on the user go to mappings in secound tab kerberos mapping add USERNAME@KERBEROSreaLm for example [email protected]
step 5)
copy+paste this code and HIT RUN :)
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.Attributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
import javax.security.auth.Subject;
import javax.security.auth.login.LoginContext;
import javax.security.auth.login.LoginException;
import com.sun.security.auth.callback.TextCallbackHandler;
public class Main {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY.LOCAL");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY", new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
// env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the attributes to return
String returnedAtts[]={"sn","givenName","mail"};
searchCtls.setReturningAttributes(returnedAtts);
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(mail=*))";
//Specify the Base for the search
String searchBase = "DC=isy,DC=local";
//initialize counter to total the results
int totalResults = 0;
// Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
totalResults++;
System.out.println(">>>" + sr.getName());
// Print out some of the attributes, catch the exception if the attributes have no values
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
System.out.println(" surname: " + attrs.get("sn").get());
System.out.println(" firstname: " + attrs.get("givenName").get());
System.out.println(" mail: " + attrs.get("mail").get());
catch (NullPointerException e) {
System.err.println("Error listing attributes: " + e);
System.out.println("RABOTIII");
System.out.println("Total results: " + totalResults);
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}It will ask for username and password
type for example : [email protected] for username
and password : TheSecretPassword
where ISY.LOCAL is the name of kerberos realm.
p.s. it is not good idea to use Administrator as login :)
Edited by: JOKe on Sep 14, 2007 2:23 PM -
My phone was stolen, but I had no data left and so can't locate it till the person who has it tries to use the internet. I backed up all my photos on iCloud, and want to get them on my PC. I installed iCloud onto the PC and followed the instructions and still can't find my pictures, says my photostream folder is empty, but it shows on iCloud that i've used most of my storage which is true, so they must be there somewhere?
Any ideas? I'd really appreciate the help! ThanksYes, I filed police report, but there is nothing they can do until I get back to them on the tracking. It's been offline. I'm sure the whoever took it can find a way around breaking in the ipad..i really was hoping to get my pictures and videos of my kids back
-
Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithunyou can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing. -
I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either
Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile. -
how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me
You must be using an update CD. You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol
-
Can I use ICloud to store all my data and use it seamlessly with my devices and Mac?
Can I use ICloud to store all my data and use it seamlessly with my devices and Mac. I.E. I want to use it as I use my time capsule and get rid of all this stuff I have in my office.
Yes.
Apple - iCloud - Learn how to set up iCloud on all your devices -
HT3486 can I use my ipad with back to my mac?
can I use my ipad with back to my mac?
No, because you have to use AFP file protocol and it is difficult to get going, although one file app does offer it, I have not seen or heard anyone that managed it. You should look in the ipad area.. as this really has little to do with Time Capsule.
-
When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???
Unless you deleted Address Book 6, or restored from a backup made before you upgraded to Lion, Address Book 6 should be on your disk somewhere. Try to find it with spotlight or by browsing likely folders with Finder. Also check Trash. If you find other Address Books, using Quick View or Get Info in Finder should show the version number.
Have you ever moved Address Book out of the Applications folder, either before or after you upgraded to Lion?
If you can't figure out how this happened in the first place, I would be worried that other OS X utilities are similarly affected. -
why can I not use icloud on my mac book OS X ? Trying to use 'find my iphone' to locate my mac if it's lost/stolen
iCloud requires Lion or later. Snow Leopard and earlier can't use iCloud,
-
I have no backup of my files because my mac suddenly stopped working.
I'm using a macbook air 11" mid-2012 mac os x 10.8.5.
Please helpTry using Internt Recovery.
http://osxdaily.com/2014/12/14/reinstall-os-x-mac-internet-recovery/
When you visit the site page click the 3½ bars gray Reader icon left of the url in the address bar for easy viewing. -
I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?
I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M. -
I am trying to use my I Tunes account with a new computer. Now we can't get the new music we bought to sync with the Nano. Any ideas?
Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991 -
In my 2013 Honda Civic Si, I'm trying to use the SMS Text Message Function, but keep getting the error message, "Unsupported Device".
I use an iPhone 5 with latest iOS 6.1.4.
HandsFreeLink works perfectly fine with my iPhone for voice calls and for streaming Bluetooth Audio. Does text messaging not work because of iMessage? Does anyone have any suggestions for this issue?
Thanks in advance!In looking for a 2013 Honda Civic (LX model, no Navi), the text feature was very interesting and important to me. Why not have my texts available on the dash and read to me rather than messing with my phone. Anyway I won't go into the whole thing about safety while you're in your driving and all that. We all know what we should and shouldn't do. Anyways...
I spoke to a salesman who said that this feature was not compatible with the iPhone, only BBs. Of course this didn't impress me and I found it hard to believe that Honda would restrict themselves like that. Anyway, a few searches on the web later and Honda shows that the iPhone 4, 4S and 5 are compatible for receiving texts through the car, just not sending them. I believe you need a minimum of iOS 5+ for it to work though.
Once I found this the salesman and I did some testing with our phones. He has a 4S with iOS 6.1.3 and mine is a 4 with iOS 6.1.3. Initially we setup the phone using the Bluetooth config on the Civic's iMID display. It was setup and hands-free calling tested o.k. Next the texting was tested. Both of us have iMessage turned on. Neither of us could get the messages we would send each other (1 of us had our phone setup with the car, the other sent the text and vice versa). The messages were received by the phones, just not the car). When we would go under the Text Message section, it would say "Unsupported Device". I knew that couldn't be as Honda said it was compatible. After more web searches and a phone call to Honda by the salesman, I found the following.
1) It seems like the person who had their phone paired with the Civic had to disable iMessage to start getting texts. The salesman still had it enabled on his though when he sent me texts (as SMS) and the Civic got them so both people aren't necessarily required to disable it. Now under the Text Message section, it would list the messages received.
2) I changed the Notifications on my phone for Messages from Banner to Alerts. Once I did this it started to work. The texts were showing up on the car. I had read where another person had tried this successfully but then changed it back to Banner and it continued to work. I experienced the same thing.
Granted this wasn't extensive testing but I was able to get it to do something closer to what I wanted. I'm not sure why Apple and Honda can't put their heads together to make sending texts work on the car but maybe someday it will work when enough people complain. It's kind of a disappointment that I couldn't get iMessage to work but I haven't given up hope yet. As it's a proprietary protocol, I can see Honda not supporting it though.
Hope this helps someone out!
FYI I bought car!
Maybe you are looking for
-
Printing Barcode in Dot Matrix Printer
Dear Experts, We have developed Smart form to print Barcode and it's printing fine in LaserJet printer & readable by the scanner, We need it on Dot Matrix printer for (multiple copies) and tried the same with Dot Matrix printer it use to print but n
-
With th upgrade page displayed for maverick 10.10.2 I click on down load. Amessage pops up say there are other accounts that need to be updated and it gives me the account (old email address) which is an old account that I changed the name to new em
-
Reading in a file with BufferedReader
I haven't used Java for anything beyond calculations and simulations so my programming skills aren't great. I'm trying to read in a file which contains scientific data. I want to skip two digits, read 5 into one element of an integer array, skip 14 d
-
ITunes Match wants to realce my library by a empty new library
I am trying to add my iTunes Mac to a new Mac, but when I turn on iTM it says that it will realce my library with the new Macs library. I can only accept or cancel.. Please help me...
-
Am I correct in assuming that replacements may have minor cosmetic damage in some places
Since they're refurbs?