Trying to use "check for updates"

why when do i click in "check for updates" the itunes said that i'm not connected to the internet or to tr again later .I' using the 6.0.2 , when i used the earlier one was fine.
TKS DUDU

Who cares if the auto update thing doesn't work? I don't.
Doesn't that update try to auto-start the installation over the internet?
Which is bad Windows business, to begin with. I immediatley turned it off the first time it asked me to update.
I never let anything download automatically without me saying yes or no.
How else can you figure out what might have gone wrong with your PC, if it's doing stuff in the background that hasn't been really acknowledged?

Similar Messages

  • Error when using Check For Updates

    When I try to get updates using Help->Check For Updates I got following error:
    java.io.IOException: Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/html4/loose.dtd
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1313)
         at java.net.URL.openStream(URL.java:1010)
         at oracle.xml.parser.v2.XMLReader.openURL(XMLReader.java:2639)
         at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.pushExternalDTD(NonValidatingParser.java:607)
         at oracle.xml.parser.v2.NonValidatingParser.parseDoctypeDecl(NonValidatingParser.java:523)
         at oracle.xml.parser.v2.NonValidatingParser.parseProlog(NonValidatingParser.java:355)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:313)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
         at oracle.javatools.xml.esax.spi.ExtensibleSAXParser.parse(ExtensibleSAXParser.java:65)
         at oracle.ideimpl.webupdate.parser.MasterListParser.parse(MasterListParser.java:47)
         at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:148)
         at java.lang.Thread.run(Thread.java:619)
    After examining the response I found following link [http://w3.org/brief/MTE2] in response.
    Does any one know how to fix it ?

    java.io.IOException: Server returned HTTP response code: 503 for URL: http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1313)
         at java.net.URL.openStream(URL.java:1010)
         at oracle.xml.parser.v2.XMLReader.openURL(XMLReader.java:2639)
         at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.pushExternalDTD(NonValidatingParser.java:607)
         at oracle.xml.parser.v2.NonValidatingParser.parseDoctypeDecl(NonValidatingParser.java:523)
         at oracle.xml.parser.v2.NonValidatingParser.parseProlog(NonValidatingParser.java:355)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:313)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
         at oracle.javatools.xml.esax.spi.ExtensibleSAXParser.parse(ExtensibleSAXParser.java:65)
         at oracle.ideimpl.webupdate.parser.MasterListParser.parse(MasterListParser.java:47)
         at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:148)
         at java.lang.Thread.run(Thread.java:619)
    the same error
    problem still exist
    is there a workaround?

  • Upgrading to 10.1.3.1 - should I be able to using 'check for updates'

    I'm using JDev 10.1.3.04; from Help | Check for Updates menu I checked to see if I could upgrade to 10.1.3.1 but it did not provide this option? Should I be able to upgrade this way? If not how?
    Also, secondary question to confirm - will I need to re-install the Tomcat ADF Runtime components? anything else?
    thanks

    Hi,
    check for upgrades is used for Service Updates (SU) only. JDeveloper 10.1.3.1 is a new JDeveloper release that also includes upgrades applied to the runtime
    Frank

  • Check for Updates does not work.

    I have SQL Developer Version 3.0.04 Build MAIN-04.34
    When I check for updates it's failing with this error
    java.io.IOException: Server returned HTTP response code: 403 for URL: http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1290)
         at java.net.URL.openStream(URL.java:1009)
         at oracle.xml.parser.v2.XMLReader.openURL(XMLReader.java:2650)
         at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:304)
         at oracle.xml.parser.v2.NonValidatingParser.pushExternalDTD(NonValidatingParser.java:615)
         at oracle.xml.parser.v2.NonValidatingParser.parseDoctypeDecl(NonValidatingParser.java:531)
         at oracle.xml.parser.v2.NonValidatingParser.parseProlog(NonValidatingParser.java:363)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:321)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
         at oracle.javatools.xml.esax.spi.ExtensibleSAXParser.parse(ExtensibleSAXParser.java:65)
         at oracle.ideimpl.webupdate.parser.MasterListParser.parse(MasterListParser.java:47)
         at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:148)
         at java.lang.Thread.run(Thread.java:619)
    I'm using a Proxy, when I hit on Test Proxy button it fails to connect to login.oracle.com due to a 404. I've tried this URL with a web browser and it's also failing.
    Any workaround?
    Thanks Ramon

    Hi,
    Sorry I missed your post earlier, but I did see another similar one that resurrected this old thread:
    Re: Error when using Check For Updates
    Apparently no progress yet on this, but since only the refresh list of update centers fails, you can try manually adding the standard Update Centers to the Search list on Step 2 of the wizard:
    Oracle SQL Developer
    http://htmldb.oracle.com/pls/otn/f?p=raptor:updates
    Internal SQL Developer Updates
    http://raptor.oraclecorp.com/builds/updates/updates.xml
    Oracle Extensions
    http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/162031.xml
    Third Part SQL Developer Extensions
    http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/162033.xml
    Hope this helps,
    Gary
    SQL Developer Team

  • IMPORTANT: SQL Developer 1.2.1 Check For Updates Notice

    Please note:
    The Check For Updates notification yesterday and today (16th or 17th Aug) included a file with a number mismatch. This caused SQL Developer to continue to prompt for new Updates. This is also why a new installation of SQL Developer 1.2.1.32.00 prompted for Updates. This error has been repaired. You can now use Check for Updates to update from SQL Developer 1.2 to 1.2.1.
    It remains true that after you have run Check for Updates that you must do a second restart. This is related to the framework and is a known issue.Without the second restart you will not be able to invoke the SQL Worksheet.
    We have identified 2 errors that will be addressed, with new updates sent out using Check for Updates as soon as we can. These two errors are that reports with Charts do not currently work, and non-privileged users can't view tables.
    The team apologizes for the inconvenience.
    Regards
    Sue Harper
    Product Manager

    Hello Sue,
    I just proceeded the update on my working machine too.
    The version number what I talked about (on this machine) was 1.1.2.25 before and still is the same after the update.
    (This is different from my home machine.)
    By the way - I had to restart SQL Dev two times before it realized, that it already has the latest updates. One restart still seems to be not enough.
    Yes I know that all the extensions has it's own versions.
    But for me the question remains: What is the version info under "Help-> About" (in my case 1.1.0.21.) good for? If this number has a meaning - what is it? and if it has no meaning (and only the version number of every single extension is interesting) why does these version number exist at all?
    You said: until then I recommend you use the full download.
    Question: Is it guarantied, that (at any time) the full download always has all latest extensions ?
    Regards
    Andre

  • HT4972 I'm trying to update my iphone 3G to ios5 - however in Itunes when I 'check for updates' it is advising me that I have the latest version (4.2.1). Hence I can't update and now I can't run a few of the apps I previously used. Help!

    Following a backup and restore of my iphone 3g I have lost the use of a number of apps - this seems to be as they need ios5 or later to support them and I only have 4.2.1
    When I check for updates via itunes I am advised that I have the latest version - but clearly I don't.
    Any help gratefully received on how I can upgrade to ios5
    Yally

    Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

  • Why does "Check for Updates..." show that there are no updates available while I'm using Firefox 3.6.18 and latest version is 5.0.1?

    First and foremost, I'd like to clarify that I hardly have any technical knowledge. So pardon me if this comes across as a silly question to the professionals. Here are the details pertaining to this problem as per the best of my limited knowledge:
    I'm currently using Mozilla Firefox 3.6.18; previously it was 3.6.13. It was updated to 3.6.13 from 3.6.9 after I clicked on Check for Updates... and it told me that it'd be done when I reboot my system. When I restarted my PC, I was surprised to find that it was downloading the version 3.6.18. I didn't know how much it'd progressed in the process, so I let it finish it. After that, I disabled the option that enables it to download and update on its own, and turned it off. Next time when I started it, it was 3.6.18, but wasn't updating on its own anymore.
    Now I wanna update it directly to the latest version 5.0.1. But when I leave it to "'''Automatically download and install the update'''" option under Tools>Options>Advanced>Update, it downloads and updates the versions as per their release order. So if I leave it to it, then when I start it next time, it'll start downloading the version next to 3.6.18 and update to it instead of updating directly to 5.0.1. It'll keep doing so until it reaches there. For reasons of my own, I don't like that. So I '''unchecked '''the "Automatically download and install the update" option and chose the "'''Ask me what I want to do'''" option (so that it doesn't keep repeating the "downloading and updating" process on its own every time I start my PC). Then I went to Firefox site and thought of downloading and updating to the latest version on my own. But then I was informed that if I do so, '''I'll get the latest version, but I'll lose all my saved bookmarks unless I follow some hectic procedure to save them and load them again after installing the latest version of Firefox'''. I don't want to let that happen either. So, can anyone suggest me a way out of this situation without losing my bookmarks?
    Almost forgot. I tried several times by going to '''Help>Check For Updates...''', but every time it returned the same result: "There are no updates available. Firefox will check periodically for updates." How come no update is available while the version I'm using is 3.6.18 and the latest version is 5.0.1? In short, '''Check for Updates...''' didn't help either. (Even when I updated it last time, shouldn't it have updated itself from version 3.6.13 to 5.0.1 directly?)
    So, can anyone suggest a way by which I won't lose my bookmarks and would be able to update to the latest version directly too? An answer that wouldn't involve removing the current version and installing the latest one, but directly update to it (it's okay if it needs downloading) would be more welcome. I know that the bookmarks can be saved in a file and all, but I'd like to know if it's possible as it happened for my current version from previous version. (It downloaded and updated itself on its own, disturbing nothing, not even logged me out of certain accounts where I stay logged in. The only problem there was that it wasn't updating directly to the latest version.)
    I hope the aforementioned details make sense and are helpful enough for others to help me. Thanks.

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • When will there be fix for AirPrint in Yosemite? I cannot use my HP printer. I have uninstalled/resinstalled everything you can think of. I have deleted and added my printer more time than I can count. I have checked for updates. Nothing has worked.

    When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
    The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
    Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
    MacBook Air (mid 2012), OS 10.10,  HP Officejet 7500a

    This is what appeared on Console:
    11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
    timestamp: 12:42:32.557 Wednesday 12 November 2014
    process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
    code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
    #exceptions
    11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
    11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
    11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
    11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
    11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
    11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
    11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
    11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
    11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
    Not sure what any of this means.

  • TS1492 When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

    When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.

    If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server.  In fact I am kind of surprised it will run on a Macbook Air.  Are you sure you are running iTunes 7?

  • Getting an error when trying to check for update for my iPad

    On the iPad itself, there is no option such as 'update' in the general tab under settings. So I connected the iPad to my computer and on iTunes, whenever I click for 'Check for Update' I get an error message that says:
    The iPad software update server could not be contacted
    Make sure your network setting are correct and your network connection is active, or try again later
    My network is absolutely fine and I have been trying since almost 2 days now.

    If you would like help from these user forums then saying what the error message was would be useful.

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • TS1814 I'm trying to update iTunes software, but when I go to Help/Check for updates, I continue to get the message: "The iTunes update server could not be contacted. Please check your Internet connection or try again later."  Is there another way to upda

    I'm trying to update iTunes software, but when I go to Help/Check for updates, I continue to get the message: "The iTunes update server could not be contacted. Please check your Internet connection or try again later."  Is there another way to update?

    Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I'm trying to update my software to iTunes 10.5.2.  I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen.  I can't seem to get past this loop.  Any suggestions?

    I'm trying to update my software to iTunes 10.5.2.  I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen.  I can't seem to get past this loop.  Any suggestions?

    If I go through the setup that you suggested, won't I screw up the existing software on my system?
    No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.)

  • Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing. Help.

    Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing else happens. Several tries, settings appear correct. Suggestions? Safari operates correctly, music icon matches (not from iTunes, simply music on my MacPro and iPod). Is Cloud the issue, perhaps? But everything worked before the upgrade. Using my home network. Hope this info suffices. Appreciate any guidance.

    Problem solved. Saw the solution in a more recent post. Downloaded a free app, then all my other apps started to work again.

  • HT3576 Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
    http://support.apple.com/kb/HT2052

Maybe you are looking for