Trying to use document 2 but can't open file on computer!

I put a .rta document from my iPad into Dropbox. Now I can't open it on my Mac, but the message says the file can't be read. Does anyone know how to do this?

I don't believe you put the correct file in dropbox.

Similar Messages

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late.

I just upgraded to Numbers 3.0 but can´t open files of Numbers 9 version, help...!!!!!!

I just upgraded to Numbers 3.0 but can´t open files of Numbers 9, help...!!!!!!
Can someone please help me, because those files in Numbers 9 version, are for my work and now I can´t open them

Hi rabg,
I am using OS X 10.8 on a Mac. This may be different if you are using iOS.
Does Numbers'09 still exist in your Applications folder? Maybe inside a new folder? Perhaps you could use Numbers'09 to open your documents.
Regards,
Ian.

Indesing updated to latest version (10.0) but can't open file created yesterday.

Created a file yesterday with Indesign. Wanted to continue work today but Indesign requests to update to 10.0. I updated allready I even created this file with this version with this edition of Indesign but can't open it anyway.
- Alert shown is: Cannot open "[documentname]" because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose Save As InDesign CS4 or later, or export to IDML. -
So to be clear; I created this document in this version of Indesign and it just doesn't open anymore although all possible updates are performed.
Am really in need of some help since it is about two documents and I just lost work like this...
Kind regards,
Linda

Aaaaaaahhhhh....FOUND IT!! The trick is to NOT use the alias-thumb in the dock, but to actually start up in the apps-folder where the Adobe Indesign 2014 edition is installed next to the 'old' edition.
Wow. Not sure to feel stupid or to be angry... pffff...
Back to work I say! (The best remedy...)

Im using iphone5 but can't open the power what can i do?

i'm using iphone5 but i can't open the power what can i do
i charge almost one hour stell can't open the power

The paucity of details is amazing. Computer, OS, file type, etc. will go a long way in getting a solution.

HT4759 Trying to use Icloud but can not get it to work , says I need I06 , how do I find out my version on this Ipad

How do I find the details of my operating system on my IPad 2 as I can not sem to get I Cloud to work

sync the ipad to the computer that has itunes via usb. This is the same computer that you originally used to activate and set up your ipad.

[SOLVED] Samba: Can browse shared folders, but can't open files

Hi all, I've been using Samba to share some folders from my Arch box over the local network, and have not had any issues until just now. As the title says, I am able to browse (via Samba, both on a different device and from the Arch box itself) the folders being shared as well as see their contents, but trying to open a file fails, as does attempting to create a file in one of the shared folders. Accessing the files from the computer itself directly (not via Samba) works fine.
The error given by Thunar when trying to create a file is simply:
Failed to create empty file "test file".
Invalid argument.
Trying to read a file results in the same "invalid argument" error being given by the app that should open the file.
I've removed Samba and reinstalled, following the steps on the wiki to get it set up. Still have the issue.
Further, I only seem to be able to add shares via the smb.conf file - previously I was able to share folders via Thunar or the net usershare command, but now those also give an error:
$ net usershare add tmp /tmp "tmp" everyone:F guest_ok=y
net usershare add: cannot convert name "everyone" to a SID. Undetermined error.
Any ideas on what could be causing the problems would be greatly appreciated!
edit: my smb.conf file:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
usershare path = /var/lib/samba/usershare
usershare max shares = 100
usershare allow guests = yes
usershare owner only = False
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = archpc
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
writable = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; read only = yes
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
Last edited by m00se (2014-05-26 11:35:28)

It seems your Samba is denying access to these files & dirs. My best guess would be that either the Samba user is not allowed to write (and read) those (in which case you'd have to modify the permissions accordingly) or Samba sets, when the share is mounted, the permissions such that your user is not allowed to read and write (you may in this case try to just set permissions for you to allow you what you want to do; or use "create mask" or "directory mask" or "writable" in your samba config. ).
Also, what do the logs say about this? According to your samba conf they are in /var/log/samba/%m.log where %m is the hostname or IP.

Help adobe reader listed as installed but can not open file

I need to open a file from email. It says adobe reader not installed but it shows it is installed when I look in control panel. Thanks for any help you can shre..

1.Which OS you are using?
2.What version of Reader is shown in in control panel?
Just try re installing Reader from Adobe website and report any issue you face during installation.

DWCC File:Open tries to use EVERY OTHER APPLICATION to open file

Hi
I'm on Dreamweaver CC and when I go to open a file it tried using my CS6, CS5.5, CS5 and finally CS4 versions of Dreamweaver to open the file (a .cfm file). I uninstalled ALL of those files and now, when in Dreamweaver CC I go to File: Open it automatically opens Apple Numbers, attempting to open the file.
Anyone know how to actually open a file with Dreamweaver and get Dreamweaver to actually open it?
Thanks in advance,
Rich

If you don't want to add the Legacy Extension or get the paid extensions from DMXZone, and you're a CC subscriber, you can have both DWCS6 (with database functionality by default) and DWCC installed at the same time under the same subscription (no additional cost). They just don't run at the same time.
Here's how you add DWCS6 through the Creative Cloud...
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
Maybe if enough people request that the database features get added back, Adobe would return them to the program? It's happened with other features.
Here's the official form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Latest update already installed but can't open file

I have recently downloaded the latest update for Pages (version 5.2), and my Appstore updates pages confirm this by showing "installed" but when I go to open a Pages documents, I get a message saying I need a newer version of Pages to open the file. Then when I open up my Pages, despite the appearance being that of the latest version (ie. starting with the iCloud window), when I check on my "about Pages", sure enough, it says my version is only 4.2. I'm completely at a loss as to what I should do? It was working fine for days after I had downloaded the latest version. But because my kid had stuffed up my desktop and deleted one of my folders, I went to the time machine to restore. Is that what caused the problem?

Pages 5.x is in the Appliations folder
Pages 4.2 is in the Applications/iwork 09 folder
You have to make sure you are opening the documents in the right version. I know it is confusing as the icon on the documents all shows Pages 5 icon.

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

I am trying to use pages. When I open a blank document and enter text, nothing appears on the document. What is the problem?

I am trying to use pages. When I open a document and begin entering text, nothing shows up on the document. I cannot see what I am typing. What is the problem and what am I doing wrong.

Thanks Jerrold. But I am opening a word processing document. The same thing happens when I select a blank layout page. I try to put in shapes and nothing appears. When I click around on the blank word processing document the verbage will appear in a green color but when I type, I still cannot see what I am typing. I have tried to uninstall and reinstall and this did not help.
Thanks Again

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like t

I'm trying to export a raw image from lightroom 5.6 to Photoshop cc 2014 2.1. I right click to export menu in lightroom as I've always done to export to Photoshop. Photoshop opens, but it can't open file, window opens to find a file to open. I'd like this to export my lightroom images to edit in photoshop as it has always been able to do for me. What fix do you recommend?

Hi Ashley Clavette,
The Initial view setting works perfectly when the file is opened in Acrobat after setting the desired Initial View.
When you upload the file onto Wordpress, and view it on that website in the browser...it might be using a different pdf handler program which might be causing this issue ( it would be helpful, if you could provide the screenshot) , however when you download the pdf again from wordpress server...and open in Acrobat/Reader...then what exactly happens ? Does the pdf opens in the desired Initial View setting?
Rahul

Trying to download Photoshop Elements 9 on to my tablet. I have my S/N. I down loaded the files –PhotoshopElements_9_LS15 – but can not open.

Trying to download Photoshop Elements 9 on to my tablet. I have my S/N. I down loaded the files –PhotoshopElements_9_LS15 – but can not open.

you need both the 7z and exe files. put both in the same directory and click (or double click) the exe.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have a macbook pro and installed the latest version of numbers but can't open or create a new document

i have a macbook pro and have installed the latest version of numbers but can't open or create a new document

Melting,
Can you share any information regarding what you have tried? To create a new document select the menu item "File > New..."
What documents have you tried to open and what happened when you tried?

Trying to use document 2 but can't open file on computer!

Similar Messages

Maybe you are looking for