Trying To Use Find While Filtering Out Unwanted Files Listing In Searches

Hi!
I'm trying to use Find to list files made or created or changed after a certain date, but I can't keep zillions of unwanted files popping up. I want to list all the files created after June 23 and it does that well -- including hundreds of "webbookmark" files too. I used "!" like Help said to supposedly block that term from appearing but then nothing shows up! I'd truly appreciate any help!
Trudi

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
HTH,
S.

Similar Messages

  • I am trying to use Find My Friends and I have been through troubleshooting 3 times. Why won't my location work? Everything is on but the 2nd screen in Find My Friends is grayed out, whereas my other family members 2nd screens are active?

    I am trying to use Find My Friends and I have been through troubleshooting 3 times. Why won't my location work? Everything is on but the 2nd screen in Find My Friends is grayed out, whereas my other family members 2nd screens are active? I have an iPhone 6 Plus, latest ios8, and yes my location says it is being shared, but it is not.

    Pyralus wrote:
    I decided to try and boot from the Tiger discs, but when I did, all I got was a screen that looked like a blizzard of pixels.
    The firmware was likely changed and it's not compatible anymore or the disk is bad.
    I was able to boot using the Snow Leopard disc from both my new MBP and my girlfriends MB, but both said that OS X could not be installed on this computer, and I couldn't even use the disc utility to wipe the drive.
    Those disks don't have the hardware drivers your machine needs.
    Your going to need to get a Snow Leopard retail install disk from Amazon/elsewhere.
    Do I need to have a serial number to reinstall OS X?
    Thankfully No.

  • I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. What should I do?

    I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!

    http://support.apple.com/kb/ht1212

  • I am trying to use the Find My Mac on iCloud. I keep getting the error message "No location available" when trying to use find my Mac. Any suggestions as to what to check?

    I am trying to use Find My Mac on Icloud. It keeps giving me the error message No location available for my Mac. Any suggestions on what to check to correct this problem? Thanks!

    http://support.apple.com/kb/TS4006

  • I lost my iPad 3days ago. I tried to use "find my iPad" but always"off line"Idon't understand why always"off line" and  how Ican get back my iPad!

    I lost my iPad 3days ago. I tried to use ”find my iPad” but always”off line”Idon't understand why always”off line” and  how Ican get back my iPad!

    Two possibilities:
    1. Maybe it's not turned on.
    2. Maybe the iPad is wiped (setup as new)

  • Hello, i have lost my ipod (5th generation) and i have tried to use ' find my iphone' but it says my ipod is offline so i think its dead....what should i do?

    hello, i have lost my ipod (5th generation) and i have tried to use ' find my iphone' but it says my ipod is offline so i think its dead....what should i do?

    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I own an iMac and a Macbook Air and I have iWorks on my iMac. Can I copy it to my Air so that I can use it while working out-of-town? It would not be used on both computers simultaneously.

    I own an iMac and a Macbook Air and I have iWorks on my iMac. Can I copy it to my Air so that I can use it while working out-of-town? It would not be used on both computers simultaneously.

    It depends on how you bought iWork (no 's').
    If you bought a single-user retail box or license from the trial, no, you cannot legally install it on another Mac.
    If you bought a family pack retail box or licesnce, you can install on up to five Macs in your household.
    If you bought it from the Mac App Store, you can install the apps on as many Macs that you have by opening the Mac App Store & clicking on Purchases. Enter your Apple ID & click install.

  • When trying to use find my Iphone  says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

    when trying to use find my Iphone  says off line , suggestion is to switch on and off airplane mode , so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?

    Ivorbiggin wrote:
    so are you saying when you have your phone nicked you should leave a note for the thief to do this so we can trace him?
    Yes.

  • I recently lost my iPhone and tried to use "Find my iPhone" but did not see my phone listed. Why is that?

    I recently lost my iPhone and tried to use "Find my iPhone" but did not see my phone listed. Why is that?

    If it is not turned on and connected to the Internet it will not show up.  If has been restored to factory condition it will not show up.

  • TS4006 why can I not use icloud on my mac book OS X ?  Trying to use 'find my iphone' to locate my mac if it's lost/stolen

    why can I not use icloud on my mac book OS X ?  Trying to use 'find my iphone' to locate my mac if it's lost/stolen

    iCloud requires Lion or later. Snow Leopard and earlier can't use iCloud,

  • I am trying to use Find My Phone for people to follow me on the NYC Marathon next week.  Is there a way to set up a temporary User ID and Password to give out to people for this purpose?  I would obviously want to delete that log in info after the race.

    I would like to use Find My Phone for friends and family to follow me during the NYC Marathon next week.  Is there a way to set up or temporarily change my User ID and Password for this purpose?

    New York Runners has an app that is specially designed to do exactly that. It's (or will be) available in the App Store.
    http://www.nytimes.com/2011/10/27/sports/for-new-york-city-marathons-fans-a-cell phone-app-to-keep-in-touch.html?ref=technology
    You might also look at apps like RunMeter. It will let you send updates by email, Facebook or Twitter. Glympse is another app that, though not designed specifically for runners, might also be useful.

  • Using Finder while running off of DVD

    Is there any way to access the Finder to open an application once you are booted from the Mac OS X installation disc? I am trying to use VolumeWorks to partition my drive without erasing it, but I can't do it while I am running off of the system drive. I can't figure out how to access the application or Finder once I am booted from the Mac OS X Disc. Is there any way to do it?

    Sorry, the Tiger installation disc does not have Finder available when you boot from it.
    Under 10.3 and earlier it was possible to use BootCD <http://www.charlessoft.com> to create a bootable OS X CD with a working Finder and Dock on it. The developer has tried to build Tiger compatible versions but was not able to get them working satisfactorily. As far as I know he has abandoned development of this app. Maybe he'll get it going under 10.5.
    I made a 5GB partition on a FireWire drive and installed a bare-bones version of Tiger on it that I can use to boot from in an emergency.

  • Trying to use Web LCID property to get the List name in client object Model

    Hi ,
    I am trying to change the "Personal Documents" list NoCrawl property under MySite using SharePoint Client Object Model. As we use  web.Lists.GetByTitle("Personal
    Documents"); method to get the list,but here problem is :for different language List name is in their language.So I tried to use LCID property of the WEB and
    have taken key-value pair (PersonalSiteOnet_List_PersonalDocuments) from the resource file for that language from 14 hive.
    Example:I have selected Spanish language .there are so many LCID for Spanish language but Microsoft has given only one language pack for Spanish.
    Then,My Question is that
    "All LCID for Spanish language are using same Spanish language pack dictionary file OR something else"
     

    Hi,
    According to your post, my understanding is that your requirement is getting list in different language.
    Here are two ways for your reference:
    1. We can use getById method instead, so that we can avoid the language issue.
    2. We can use an array to store the different list name in different language in you JavaScript code, then use the code snippet below to get the list:
    var userLcid =_spPageContextInfo.currentLanguage;
    var localizedStrings = {
    ListName: {
    _1033: "EnglishName",
    _3082: "SpanishName"
    var listName=localizedStrings.ListName["_" + userLcid];
    var list=web.Lists.getByTitle(listName);
    More information:
    http://msdn.microsoft.com/en-us/library/hh670609.aspx
    http://wellytonian.com/2012/11/language-packs-sharepoint-2010/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Reducing time while Filtering Out New Records with the Same Key

    Hi Experts,
    I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D   takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key .  While for other master data it hardly takes 5 minutes.
    Any pointers how to reduce the timeu2026
    Thanks in advance
    Sam

    Hello,
    No there is no need to do that change then.
    Can you tell me are you doing a full load daily to 0MATERIAL object.
    why dont you use delta.
    Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
    Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
    Regards,
    Shashank

  • I'm trying to use the digital in/out on my G5 with LogicPro

    I've been trying to setup my G5 dual 2.0 (10.4.6) and LogicPro 7.2.1 using the digital in and out of the G5, the problem I'm having is that I cannot make the clock source stay as external, it keeps jumping back to internal even-though it is connected properly to my Digidesign 192 interface's lightpipe.
    When I use the Motu 828 it locks to the 192's clock source just fine.
    Is there something I'm missing, or is it just not possible?
    Thanks in advance
    Marcello Azevedo

    Thanks for responding,
    I'm using Protools on a different computer, all I need is to get the internal Digital In/Out of my G5 dual 2.0 to accept an external clock source, the clock source comes from a 192 I/O interface being used on a G5 dual 2.7 with Protools.
    Thanks
    Marcello Azevedo

Maybe you are looking for