Trying to use FireWire devices with a W540 through a Thunderbolt adapter
We have a camera that we need to use that has FireWire 800 as its sole interface, and because it needs to be mobile we had to use it with a laptop. After some research we decided that the best course of action was to purchase a ThinkPad W540 and connect the camera to the Thunderbolt port with a Thunderbolt to FireWire Adapter, as this should give us plenty of bandwidth for the camera.
Unfortunately, we haven't been able to connect any FireWire devices to the laptop in this way. We have tried connecting both the camera and a FireWire hard drive through the adapter, and while the power lights will come on for both devices the computer resolutely refuses to even acknowledge their existance.
I have tried everything that I can think of to get this to work, updating all of the dirvers on the laptop, checking all of the settings in the BIOS, and searching the forums for similar issues, but now I have run out of ideas. What can I do to get this laptop to play nice with my FireWire devices?
Solved!
Go to Solution.
Good afternoon and welcome to the community.
Sorry you're having issues using a Thunderbolt-2-Firewire adapter.
Not much I can offer on that as I've never used one, but an alternative might be to try an Expresscard Firewire adapter. A number of them I've seen offer 2 ports, so that might be useful also.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.
Similar Messages
-
Using Firewire devices with your MacBook
My wife recently purchased a new MacBook and decided that she wanted to try editing video from our camcorder. We have a Sony DCR-HC26 with firewire and USB 2.0 ports. If necessary, we can use the software provided by Sony and the USB port to import the video but Sony says that the video quality is much better using the firewire port. Unfortunately, Apple chose not to provide a firewire port on the new MacBook and there are no ports for installing a card. Is anyone aware of options available to use firewire devices with your MacBook? It seems as though this would be a common problem given the number of legacy firewire devices out there. I researched adapters but the only one I found is currently only supported by Windows XP and that doesn't do us any good. Thanks for the help.
The current white Macbook and the Macbook Pro has Firewire.
http://www.apple.com/macbook/white/
http://www.apple.com/macbookpro/
There are no USB to Firewire adapters. (Desperate aluminum Macbook owners are looking, but it can't be done.) Firewire MUST be in the computer. -
I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either
Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile. -
My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device?
The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I'm trying to use kerberos V5 with ActiveDirectory but get an error
I'm trying to use kerberos V5 with ActiveDirectory im using simple code from previuos posts but
when i try with correct username/password i get :
Authentication attempt failedjavax.security.auth.login.LoginException: Message stream modified (41)
when i try incorrect username/pass i get :
Pre-authentication information was invalid (24)
Debug info is :
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Kerberos username [naiden]: naiden
Kerberos password for naiden: naiden
[Krb5LoginModule] user entered username: naiden
Acquire TGT using AS Exchange
[Krb5LoginModule] authentication failed
Pre-authentication information was invalid (24)
Authentication attempt failedjavax.security.auth.login.LoginException: Java code is :
import javax.naming.*;
import javax.naming.directory.*;
import javax.security.auth.login.*;
import javax.security.auth.Subject;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.util.Hashtable;
* Demonstrates how to create an initial context to an LDAP server
* using "GSSAPI" SASL authentication (Kerberos v5).
* Requires J2SE 1.4, or JNDI 1.2 with ldapbp.jar, JAAS, JCE, an RFC 2853
* compliant implementation of J-GSS and a Kerberos v5 implementation.
* Jaas.conf
* racfldap.GssExample {com.sun.security.auth.module.Krb5LoginModule required client=TRUE useTicketCache=true doNotPrompt=true; };
* 'qop' is a comma separated list of tokens, each of which is one of
* auth, auth-int, or auth-conf. If none is supplied, the default is 'auth'.
class KerberosExample {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY",
new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = (String[])origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389/DC=isy,DC=local");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
Attributes aAnswer =ctx.getAttributes( "CN="+ sUserAccount + ",CN=Users,DC=isy,DC=local");
NamingEnumeration enumUserInfo = aAnswer.getAll();
while(enumUserInfo.hasMoreElements()) {
System.out.println(enumUserInfo.nextElement().toString());
// Close the context when we're done
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}JAAS conf file is :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};krb5.ini file is :
# Kerberos 5 Configuration File
# All available options are specified in the Kerberos System Administrator's Guide. Very
# few are used here.
# Determines which Kerberos realm a machine should be in, given its domain name. This is
# especially important when obtaining AFS tokens - in afsdcell.ini in the Windows directory
# there should be an entry for your AFS cell name, followed by a list of IP addresses, and,
# after a # symbol, the name of the server corresponding to each IP address.
[libdefaults]
default_realm = ISY
[domain_realm]
.isy.local = ISY
isy.local = ISY
# Specifies all the server information for each realm.
#[realms]
ISY=
kdc = 192.168.0.101
admin_server = 192.168.0.101
default_domain = ISY
}Now it works
i will try to explain how i do this :
step 1 )
fallow this guide http://www.cit.cornell.edu/computer/system/win2000/kerberos/
and configure AD to use kerberos and to heve Kerberos REALM
step 2 ) try windows login to the new realm to be sure that it works ADD trusted realm if needed.
step 3 ) create jaas.conf file for example in c:\
it looks like this :
ISY {
com.sun.security.auth.module.Krb5LoginModule required
debug=true;
};step 4)
( dont forget to make mappings which are explained in step 1 ) go to Active Directory users make sure from View to check Advanced Features Right click on the user go to mappings in secound tab kerberos mapping add USERNAME@KERBEROSreaLm for example [email protected]
step 5)
copy+paste this code and HIT RUN :)
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.Attributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
import javax.security.auth.Subject;
import javax.security.auth.login.LoginContext;
import javax.security.auth.login.LoginException;
import com.sun.security.auth.callback.TextCallbackHandler;
public class Main {
public static void main(String[] args) {
java.util.Properties p = new java.util.Properties(System.getProperties());
p.setProperty("java.security.krb5.realm", "ISY.LOCAL");
p.setProperty("java.security.krb5.kdc", "192.168.0.101");
p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
System.setProperties(p);
// 1. Log in (to Kerberos)
LoginContext lc = null;
try {
lc = new LoginContext("ISY", new TextCallbackHandler());
// Attempt authentication
lc.login();
} catch (LoginException le) {
System.err.println("Authentication attempt failed" + le);
System.exit(-1);
// 2. Perform JNDI work as logged in subject
Subject.doAs(lc.getSubject(), new LDAPAction(args));
// 3. Perform LDAP Action
* The application must supply a PrivilegedAction that is to be run
* inside a Subject.doAs() or Subject.doAsPrivileged().
class LDAPAction implements java.security.PrivilegedAction {
private String[] args;
private static String[] sAttrIDs;
private static String sUserAccount = new String("Administrator");
public LDAPAction(String[] origArgs) {
this.args = origArgs.clone();
public Object run() {
performLDAPOperation(args);
return null;
private static void performLDAPOperation(String[] args) {
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory");
// Must use fully qualified hostname
env.put(Context.PROVIDER_URL, "ldap://192.168.0.101:389");
// Request the use of the "GSSAPI" SASL mechanism
// Authenticate by using already established Kerberos credentials
env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
// env.put("javax.security.sasl.server.authentication", "true");
try {
/* Create initial context */
DirContext ctx = new InitialDirContext(env);
/* Get the attributes requested */
//Create the search controls
SearchControls searchCtls = new SearchControls();
//Specify the attributes to return
String returnedAtts[]={"sn","givenName","mail"};
searchCtls.setReturningAttributes(returnedAtts);
//Specify the search scope
searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
//specify the LDAP search filter
String searchFilter = "(&(objectClass=user)(mail=*))";
//Specify the Base for the search
String searchBase = "DC=isy,DC=local";
//initialize counter to total the results
int totalResults = 0;
// Search for objects using the filter
NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
//Loop through the search results
while (answer.hasMoreElements()) {
SearchResult sr = (SearchResult)answer.next();
totalResults++;
System.out.println(">>>" + sr.getName());
// Print out some of the attributes, catch the exception if the attributes have no values
Attributes attrs = sr.getAttributes();
if (attrs != null) {
try {
System.out.println(" surname: " + attrs.get("sn").get());
System.out.println(" firstname: " + attrs.get("givenName").get());
System.out.println(" mail: " + attrs.get("mail").get());
catch (NullPointerException e) {
System.err.println("Error listing attributes: " + e);
System.out.println("RABOTIII");
System.out.println("Total results: " + totalResults);
ctx.close();
} catch (NamingException e) {
e.printStackTrace();
}It will ask for username and password
type for example : [email protected] for username
and password : TheSecretPassword
where ISY.LOCAL is the name of kerberos realm.
p.s. it is not good idea to use Administrator as login :)
Edited by: JOKe on Sep 14, 2007 2:23 PM -
is snow leopard usb backup drive access much much quicker using firewire than with usb 2.0 ?
I migrated from a USB2 external hard drive (when it failed) to the Firewire 800 and have not looked back. I also sync from that primary drive to a secondary backup drive (still USB2). Everything I do with the firewire drive is significantly faster than USB2.
-
How I can use bluetooth devices with my Satellite L650D-14L?
Please can someone help me on how I can use bluetooth devices with my Satellite L650D-14L?
I can't see a bluetooth icon to help manange bluetooth connections.
Thanks for your help.
RegardsHi
You cannot connect any BT device to this notebook because this has not been equipped with any BT module.
So BT is not available for this unit. -
In my 2013 Honda Civic Si, I'm trying to use the SMS Text Message Function, but keep getting the error message, "Unsupported Device".
I use an iPhone 5 with latest iOS 6.1.4.
HandsFreeLink works perfectly fine with my iPhone for voice calls and for streaming Bluetooth Audio. Does text messaging not work because of iMessage? Does anyone have any suggestions for this issue?
Thanks in advance!In looking for a 2013 Honda Civic (LX model, no Navi), the text feature was very interesting and important to me. Why not have my texts available on the dash and read to me rather than messing with my phone. Anyway I won't go into the whole thing about safety while you're in your driving and all that. We all know what we should and shouldn't do. Anyways...
I spoke to a salesman who said that this feature was not compatible with the iPhone, only BBs. Of course this didn't impress me and I found it hard to believe that Honda would restrict themselves like that. Anyway, a few searches on the web later and Honda shows that the iPhone 4, 4S and 5 are compatible for receiving texts through the car, just not sending them. I believe you need a minimum of iOS 5+ for it to work though.
Once I found this the salesman and I did some testing with our phones. He has a 4S with iOS 6.1.3 and mine is a 4 with iOS 6.1.3. Initially we setup the phone using the Bluetooth config on the Civic's iMID display. It was setup and hands-free calling tested o.k. Next the texting was tested. Both of us have iMessage turned on. Neither of us could get the messages we would send each other (1 of us had our phone setup with the car, the other sent the text and vice versa). The messages were received by the phones, just not the car). When we would go under the Text Message section, it would say "Unsupported Device". I knew that couldn't be as Honda said it was compatible. After more web searches and a phone call to Honda by the salesman, I found the following.
1) It seems like the person who had their phone paired with the Civic had to disable iMessage to start getting texts. The salesman still had it enabled on his though when he sent me texts (as SMS) and the Civic got them so both people aren't necessarily required to disable it. Now under the Text Message section, it would list the messages received.
2) I changed the Notifications on my phone for Messages from Banner to Alerts. Once I did this it started to work. The texts were showing up on the car. I had read where another person had tried this successfully but then changed it back to Banner and it continued to work. I experienced the same thing.
Granted this wasn't extensive testing but I was able to get it to do something closer to what I wanted. I'm not sure why Apple and Honda can't put their heads together to make sending texts work on the car but maybe someday it will work when enough people complain. It's kind of a disappointment that I couldn't get iMessage to work but I haven't given up hope yet. As it's a proprietary protocol, I can see Honda not supporting it though.
Hope this helps someone out!
FYI I bought car! -
Using Firewire devices results in desktop stuttering
Firewire traffic is causing desktop performance to decline. On my Mac Mini (late 2009, 4 GB RAM) even slow amounts of firewire traffic is causing bad spaces performance (stuttering while moving from space to space) and jerky window movement. I have tested this with several cables and 2 different firewire devices. Device 1, a Canon HDV camcorder, is bringing the window movement to stutter when imovie is detecting the connection and showing the import screen (no transfer initiated, not even playback). Device 2, a Western Digital My Book Studio with FW800 ports, is making the desktop jerky even if it is only playing a mp3 file.
Notes:
Spotlight was disabled on the mentioned fw800 hdd. Disk activity monitor shows normal operation, very low cpu workload. The system log also does not show any suspicious messages.
USB devices like harddisks do not trigger this behaviour. The mentioned fw800 disk also has an USB port. Connecting the device using USB does not slow down desktop performance, even when transfering large files.Thanks for you suggestions. I tried them out (and some more).
Here are the results:
You can test to see if the Virtual Memory system is getting overworked by running Utilities Activity >Monitor, click on the System Memory tab and look at PageOuts and PageIns.
I kept an eye on the virtuel memory for a while now. Seems to be fine, even after hours of my usual working procedure there are virtually no page outs.
But if your ratio is good (10% or less), then I'm would suspect instead that you need to re-install a >full combo update of the latest version of OSX.
I reinstallad the 10.6.4 Combo Update. No difference.
Then I installed a fresh copy of OSX on the firewire drive. Running an unpatched OS from the drive is not bad in regards of system response time (actually it's pretty good). But the desktop jerkyness is present all the time.
Then (after switching back to my internal drive again) I stopped keeping an eye on window movement etc. and tried out some games. The results: There is a major difference in performance when the fw drive is working in the background in contrast to an usb2 drive (or even the same fw drive attached using usb). When I am playing the game (in this case it was an opengl port of Doom) there is virtually no performance penalty when I am playing the game while transfering a huge file to an usb2 drive in the background. But when I am transfering a file to the FW drive, there is huge drop in frames per second (roughly 25 - 30 %).
I am wondering if this has anything to with fact that firewire is using dma access to the system memory (in contrast to usb) an there is some sort of congestion on the memory bus. Especially since my issues are linked to gpu performance and the 9400M in the Mini uses shared memory. -
Basically, what I am trying to do is this:
Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio. I have all that figured out. I'm able to efficiently record my audio and screenplay through these instruments and programs. What I am having trouble with is the stereo mix. I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone. I want there to be no external sound except me talking into my microphone. I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
Problems I have run into so far:
-Haven't gotten it to pick up in game audio at all while using headphone. Can't figure this out
-Downloaded soundflower, have the output as soundflower. Not picking up anything, will put all my sound and midi settings at the end.
-When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
-I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't figure it out
-Trying not to run 16 million programs while running the game, will cause lag.
Summed up:
Trying to record:
-Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
-Record voice through Avid MBox Mini and MXL 909 microphone.
-Record screen gameplay through Screenium
I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps. That is done and these are my current settings:
Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record. Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
Sound Settings - Output Stereo Mix (custom channel) Input Avid MBox Mini (recording)
I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it. I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5 2.4 GHz Intel Core i7 4GB 13333 MGz DDR3 (If any of this is imporant)Hey guys,
I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
What software are you using to record your game?
If anyone knows anything different, please let me know.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution" -
I am trying to use my I Tunes account with a new computer. Now we can't get the new music we bought to sync with the Nano. Any ideas?
Downloading past purchases
http://support.apple.com/kb/HT2519
Recovering iTunes library from your device.
https://discussions.apple.com/docs/DOC-3991 -
Nothing but line in/out trying to use firewire audio interface
Hi all, hoping someone can help me out here. I just got and am trying to use a Behringer FAC202 firewire audio interface. It's documentation says all I have to do is plug it in and OS X is supposed to recognize it. Well it doesn't. I have no core audio control panel, and in the sound control panel all I have is the default line in/out for internal audio (I do have system sound through the built in sound card)
Anyone have an idea why the firewire device isn't showing up? I did check the firewire bus and I see:
Unknown Device:
Manufacturer: Unknown
Model: Unknown Device
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
The FAC202 is the only firewire device on the system.
Any help would be most appreciated.
Thanks.Thanks for your reply Jean,
I did try that and saw no luck there either, but it actually turns out that the unit may well be defective. I tried it on several macs of various makes, as well as a couple of PCs and no joy all around, so I'm sending it back for replacement.
Thanks again for your reply.
Jeff -
Using firewire 400 with 800?
I'm currently using firewire 400 to connect to a hub with 3 ext hard drives. I've ordered a 17 inch MacBook Pro but is there any way to connect a firewire 800 to these disks? Is there a hub that supports both or are they so different that they don't link in any way?
I read on this forum somewhere that if you connect a FW800 device to the FW800 port on the MBP, and a FW400 device to the FW400 port, the FW800 performance will downgrade to FW400 because they share the same bus or something... that kind of contradicts what you are saying Michael, are you sure you can run FW800 and FW400 at the same time without degrading the FW800 to FW400? (it makes sense that you should!!! i was quite surprised when I read it!!).
-
I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
I can't do this with the IDT codecs supplied.Hey Redritr,
Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
via iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
It also may be that the iTunes Store is prompting to verify your billing information:
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
via iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Additional Information:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
Thanks,
Matt M. -
I was trying to use imessage to share a photo with iPhoto. I go the message "couldn't communicate with a helper application"
My iMessage works fine for everything else. I am currently running yosemite and every app has been updated.
I restarted the macbook pro and i didn't resolve the situation. Is anyone else having this issue?
dawnAre you getting that message window after clicking on the "+" button to access your Contacts?
That's what happens to me. I know of now way to fix it.
My workaround is to create a new message in Messages and drag the photo from the iPhoto window into the message section of a new message and use the "+" button there to get the address to use
Maybe you are looking for
-
How to average an input with delays in between?
Hi, I am doing a small program for test & measurement. I have a laser on a target, the target gives me voltage signal. The laser is a tunable one. I change the laser wavelength from 1500nm to 1600nm. Let's say I need to measure 100 points. Every
-
Cannot connect MBP to OS X Server 10.8.2
Hey, I just purchased a used Mini for use as a server. I installed Server.app on the Mini and also my MBP. All was fine until... I can't remotely connect the MBP to the Mini server using Server.app. It just shakes off my login credentials as if I'm t
-
Find the value using regular expresiion
Hi All, I have a requiremnt in FInd statment using REGEX. i have values like this B1;;2009/11 Claim: 007324;SA;20081006;20091101;I004;;1032000MAR;;750;31;500481;Michael 30/07/2008;999999;EUR;247.79;007324;;;;;;K;;;FIE01240;FB01;S178740019800000011;J;
-
I returned to US from Europe iPhone 5s has a warning the No SIM card installed. I can't get phone to work. SIM card wasn't touched
-
Does anyone know how to fix the not enough access problem that came about after the upgrade?