Trying to use LE8 in place of ACID on a PC

Figured where to copy the sample wav files. I get them to come up in the loop browser where they play. I can drag 1 loop into place in track 1 without issue. I'll have the tempo for the whole project at 75 bpm. I pull a fill loop out and place it in track 2 and set it where I want it. Then when I hit play the loops aren't in sync, like they're running at different tempo's. They are both base set to run at 70 bmp and I can run them without issue at 75-78 bpm in ACID on the PC.
What am I missing?
Desperately trying to be free from having to use my PC ever again. All of my drum loops are in .wav format but I don't see that making much of a difference. If I can figure out how to use these loops in LE8 (soon to be LE9) then I can forget the PC forever.

Hi,
the tempo sync function is only enabled for loops that have been recorded in logic itself. Maybe the Apple Loops Utility can help you. But if you really need to have the loops synced, simply re-record them at their original speed in logic (maybe over a bus or so), and you'll have regions that can adapt to a changed tempo.
Fox

Similar Messages

I am trying to use the liquify tool for the first time. I created a new document (RGB/8) and before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

I am trying to use the liquify tool for the first time. I created a new document (RGB/8). Before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

What am I doing wrong?
For one thing you forgot to mention the version of Photoshop you use.
Did you place the image as a Smart Object? Liquify got Smart-capabilities with Photoshop CC.

Has anyone been able to use a DataTranslations Frame grabber with CVI? I am trying to use a DT3152 in place of NI1408 frame grabber...

DT does not provide drivers for this hardware to interface to CVI or LabView. Has anyone had success?

you can find a LabVIEW driver at:
http://www.imagemill-tech.com/LvDrivers_.htm
"Blue" wrote in message
news:5065000000080000006F1D0000-986697009000@quiq.com...
> Has anyone been able to use a DataTranslations Frame grabber with CVI?
> I am trying to use a DT3152 in place of NI1408 frame grabber...
>
> DT does not provide drivers for this hardware to interface to CVI or
> LabView. Has anyone had success?

I am trying to use two very long (2.5 hour HD) clips in multicam but FCPX only places one clip right after the other and does not create multicam. Is there a limit on clip size for multicam?

I am trying to use two very long (2.5 hour HD clips) and a 2.5 hour audio clip in multicam. One clip and the audio will ceate a multiclip but two clips will not. FCPX simply adds the second clip on at the end of the first. There must be some sort oflimitation on clip length. Is that correct and if so what is it?

The Angle field is not shown in the Inspector's default Basic View. With the clip selected in the event viewer, select the Info tab in the inspector. Change the view of the inspector from the default Basic View to the General View to be able to see the Angle field.
I assume you want to use the audio to do the sync. If FCP X has trouble syncing the audio, you can set a marker at the same chronological point in each clip before creating the multiclip. Then set Angle Syncronization to First Marker on the Angle and keep Use audio for syncronization checked. Your marker only needs to be close to get FCP X started. It will then use the audio to get final sync.

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

I am trying to use sites on the internet which require Adobe Flash Player, but when I click on the free download, it says that Apple does not support this application, so I cannot use it. This stops me viewing quite a few interesting things. Any ideas?

I am trying to use sites on the internet which require Adobe Flash Player, and when I click for a free download it says that "it is not available for your device because of restrictions that Apple has put in place". Any suggestions on how to overcome this?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices, something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

Is it possible using Applescript to place a PDF as a link at a crop bounds other than Art Box?

I've spent countless hours trying to have an applescript place a PDF as an Illustrator Link at the PDF's Media Box using "make new placed item". The only result possible as far as I can tell is a link at the PDF's Art Box.
I've seached around and have seen others with the same issue, but no answers as to whether it is actually possible. As with most Applescript stuff, I am either way overthinking it or it is not possible directly.
Currently I have a workaround using an Applescript script controlling Acrobat to sidestep the problem by setting the Art and Crop box to Media box, then place as a link in Illustrator, but it is not a direct route into illustrator.
I have also noticed that in the "Adobe Illustrator CS5 Scripting Reference" that the "PDF options object properties" do not honor the PDF crop bounds (except for the default value of Media Box). Is this an inherent problem with Applescript/Illustrator and PDF crop boxes? Could it be that the options for Open PDF and Place PDF are crossed?
Thanks for any input on this, It has actually been a problem I could not get past for years.
Nate

The AppleScript Dictionary says the same as the OMV and Jongs helper… CropToBox for placing & pageToOpen for opening… For me a misleading doc mistake… And forgiven for the fact that it should dammed well be there in the first place…
Properties
Property
Type
Access
Description
pDFCropToBox
PDFBoxType:
PDFBoxType.PDFARTBOX
PDFBoxType.PDFCROPBOX
PDFBoxType.PDFTRIMBOX
PDFBoxType.PDFBLEEDBOX
PDFBoxType.PDFMEDIABOX
PDFBoxType.PDFBOUNDINGBOX
r/w
What box should be used when placing a multipage document (default: PDF media box)
pageToOpen
int
r/w
What page should be used when opening a multipage document (default: 1)
parent
Object
readonly
The object's container.
typename
string
readonly
The class name of the object.
Isn't it cool that those can just be C&P into here… Thanks Jong…

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

I just got an iPhone 4 and I'm trying to use it on tmobile. I have restored the phone but every time I put in my SIM card for t mobile it says no service. How can I fix this?

I just got an iPhone 4 and I'm trying to use it on the t mobile network. The thing is, I've tried restoring the phone so I could use it. I haven't tried my sim on other phones yet. But I will try to see if it works. The iPhone is supposedly factory unlocked btw. Anyways, when I put in my tmobile sim, it searches for the service, but it always ends up saying NO SERVICE. I checked that my network says that the "phone not allowed". So I don't have 3G on this phone I presume. I heard that you need 3G to have service is that correct? But how do I resolve it? The iPhone does know that my phone carrier is tmobile. It just says no service. And I've tried restoring it three times and turning it off and on and it won't work. I don't have a data plan for tmobile tw! Hopefully someone can help! Thank you so much in advance!

If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot

In CS4 Use of File Place Does Not Center Images

I have been using CS3 for about 1 1/2 years, so of course had to give CS4 a try. I downloaded the trial. I immediately had an issue with File > Place.
I often use File > Place to add additional items into a document. I believe the expected functionality of File>Place is that the file should then be centered in the document.
Here is what I have done:
+ Create a 12"x12" document at 200ppi (I have also tried to create a document at 2400x2400 pixels)
+ Use File>Place to add a square 2400x2400 pixel image (JPG file) into the document
+ The added layer is now offset ever so slightly in the new document.
+ Further observation shows that the horizontal reference point is at 1202 (screen shot attached), thus creating an offset from center. I change it to 1200 and sure enough the paper is centered perfectly. I thought maybe changing it once would make it the same next time, but that is not the case.
+ When I used the File>Place command, I was zoomed out (25%), and the entire image was viewable on screen. If I zoom out further, say 8.33%, the offset is 1206.
I am able to duplicate this on two different computers with the following configurations:
Computer #1
+ Windows XP Professional Version 2002 SP2
+ AMD Athlon 64 X2 Dual Core Processor 6000+ (3.01GHz)
+ 4GB RAM
+ nVidia GeForce 8600 GT, driver version 6.14.11.5819
Computer #2
+ HP Pavilion dv9843cl Laptop
+ Windows Vista x64 SP1
+ Intel Core Duo processor T8100 (2.1 GHz)
+ 4GB RAM
+ nVidia GeForce 8600M GS with 512MB DDR dedicated graphics memory, ForceWare version 167.43
+ Video BIOS version: 60.83.4f.00.22
Operating System: Windows XP Professional
Browser: Firefox
Video display card / driver version: nVidia GeForce 8600 GT, driver version 6.14.11.5819
Screen shot (not sure if this works in these forums):
[IMG]http://cdn-1-service.phanfare.com/images/external/1466784_1419796_53071200_Full_3/0_0 _41325929f3d5a1780af10559af98d829_1[/IMG]
Any ideas?????
~ Kathleen

"Place" ..... It is not all the easy to understand how place works without studying its behavior. Often it will work in a way your not expecting if you do not understand how it works. There is a setting in Photoshop preferences Resize Image during Place. Un Checking this setting does not mean the image will not be resize nor does checking this setting mean that it will be resize. On top on top of that the seems to be something in Photoshop on My system that keeps changing the setting to the checked state.
What the heck am I writing am I trying to make this worse. No I'm not. To prove that I first tell you it is very easy to center position a placed layer in an action after the Place step add a step select all the two layer>Align layers to selection>Horizontal Center then vertical center. The deselect...
Place....
There is a lot going on remember in Photoshop a Layer can be any size Larger/smaler/same as the canvas and can have any aspect ratio. If the placed image has more pixels them a canvas side size and the preference is checked the placed image will be transformed to fit within the canvas size. If not checked the placed image will transformed to the same dpi resolution so no pixels will be changed. The only time a place image is not transformed is when the the preference is not checked and the placed image file has the same dpi as the current Photoshop Document. In this cast the image is placed in at 100% size be it smaller/larger/same as canvas size.

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use cursor and drag down the top border, but that does not reset the top border.

I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.

Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Some of the pictures I am trying to use don't quite fit into the pre-set frames... Is there a way to move just the photo with-in the frame so to use the best part of the picture?

Some of the pictures I am trying to use in Idvd don't quite fit into the specified frame... Is there a way to just move the picture itself within the frame to use the best part of the pic... For example I'm trying to use a picture of my son..but his head gets cut off when I drag the picture into the place holder....

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

Build process by using -run-in-place option

Hi,
I want use runAssembler -run-in-plcae option for my developement purpose, I Dont want to do ant script for every time while hot-swap. So how to use this option, I have checked out my module under ATG 10.Root,
And I tried this command " D:\ATG\10.0.1\home\bin>runAssembler -run-in-place test.ear -m B2CCommerce TestRun DafEar.Admin | ATGLogColorizer.exe"
this create's in the ear with test.war as well, I want to know if we use -run-in-place, should test.war also creates or not.
Please help me for the right command.
Thanks,
Prabhu.Chinaraj

swhinck wrote:
But if I export as SWF, some people will not be able to open it.
Whatever format you send it, some people will not be able to open it because they may not have the software to view it. SWF files can be viewed on any platform with Adobe Media Player.

Website with calculator I'm trying to use says "inactive plug-in".

The website I'm in and trying to use the calculator states "inactive plug in". I went into "manage plug-ins" and I used to have this website in there, but it's gone (probably b/c of another recent problem I had and fixed). How do I get this to work? THANKS!

Hello Annefran33,
I was delving into our resources looking for additional causes for this issue, as you went to the first place I would have looked as well. I feel I have something here that just might get you back up and running. From an article about Java Security found here: http://support.apple.com/kb/HT5319,
Users may re-enable Java if they encounter Java applets on a web page or Java Web Start applications by clicking the region labeled "Inactive plug-in" on a web page. This security measure is also available for OS Lion systems if the prior update "Java for OS X 2012-003" was not installed.
Take care,
Sterling

Trying to use LE8 in place of ACID on a PC

Similar Messages

Maybe you are looking for