Trying to use Linksys Wireless Networking with my Mac

I bought a linksys wireless router and hooked it up to my PC modem and now am wanting to access the internet wirelessly on My Mac. I have hit a brick wall!!!
Linksys say they cannot really help as they have limited info regarding MAC (what!!) so now I am all configured with WEP etc but cannot seem to get my MAC to acknowledge it...anyone Help!!!???
Tx

This is the forum for the Safari browser. Better to ask in the forum for networking problems:
http://discussions.apple.com/forum.jspa?forumID=755

Similar Messages

  • Using multiple wireless networks with Single sign on?

    The university that I currently work for has switched from one wireless SSID to 2 separate SSIDs that separate the student users from the faculty/staff users. At this time only the Faculty Staff can log into STAFF and students can only log into STUDENT...
    I have a few laptop carts that were setup for student use and have single sign on configured for the STUDENT wireless connection. The laptops are on the university's domain so that students have access to the home drives.
    We run into problems when Faculty try to use a laptop to teach a class. They are unable to log in because their credentials are not authorized for the STUDENT wireless network. 
    So...Is it possible to setup 2 wireless profiles (STUDENT and STAFF) with single sign on and give the user an option to choose from?

    Hi,
    Based on your description, I would like to suggest you use Group Policy to configure Wireless Network Settings:
    Using Group Policy to Configure Wireless Network Settings
    http://technet.microsoft.com/en-us/magazine/gg266419.aspx
    Please follow the information from the link above to check the issue.
    If it doesn’t work, I recommend you initial a new thread in our Windows Server Forum for further assistance.
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=windowsserver
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Extending my Linksys Wireless Network with AirPort Express

    I would like to add an Airport Express to my wireless network to extend my wifi range and add AirPlay to my home theater system.  Can Airport Express be used to extend my current wireless system that is not an Airport Extreme devise? 
    Also, by adding the Airport Express does this now limit the number of devices I can have on my wireless network to the 10 even if the Linksys supports 50?
    Thanks for any advise...

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your non-AirPort router can be extended wirelessly with the AirPort Express Base Station (AX).
    The few that are known to work are:
    another Airport Express Base Station
    802.11g Airport Extreme Base Station (AEBS)
    802.11n AirPort Extreme Base Station (AEBSn)
    Linksys WRT54G or WRT54GS (not v5)
    Belkin F5D7230-4 and F5D7231
    BT Voyager 2091
    Netgear WGR614 v6
    Buffalo WGR-G54

  • I need to create a wireless network with a Mac and a Windows PC...

    ...and I have made certain assumptions. Are they right?
    First, the background. We have two ISPs: the Mac is connected to cable broadband via Airport Express (the cable point and the Mac are in separate rooms); the PC laptop is connected to broadband down the phoneline via a wireless Netgear modem (or router? not sure what the difference is). Our printer is connected via USB cable to the Mac and we'd like to be able to print wirelessly from the PC. Ideally, I'd like both computers to access the cable broadband.
    Assumption 1: I need to create "A Network";
    Assumption 2: Because the PC may on occasion be used beyond the range of Airport that network should access the web via the Netgear modem/router;
    Assumption 3: My first step is to plug the Netgear modem/router into the cable modem and reset the Mac to work with the Netgear thing.
    Assumption 4: Next step is to change network settings on the PC to go online via cable.
    Assumption 5: Then I weave some voodoo to create A Network (sorry, but this is virgin territory).

    I would recommend that you set up your home network to have one single broadband access point for one and only one wireless router/modem combo (Netgear), that has NAT enabled and DHCP enabled. Then, I believe that Airport Extreme Base Stations can be set up in a "range extender" mode (sorry I don't have one so don't know all the details on this). It would not be set up as a router administering NAT or DHCP, it would be set up more like as if it were a hub (analogy: AC electrical power "octopus" outlet). Lastly, this website has a ton of information on how to set up Macs and PCs to do file sharing, printer sharing, etc., in either direction.

  • Can I use a wireless speaker with my mac?

    I really hate all the wires running behind my computer, so it would be awesome if I can buy a wireless or bluetooth speaker for my Mac. I'm just wondering that is it possible to do that? If possible, please give me some hints on how to.
    Thanks so much in advance.
    Enoch P

    A couple of examples:
    http://www.maplin.co.uk/Search.aspx?criteria=wireless%20speaker&source=15&SD=Y
    Both require a transmitter connected to the computer.

  • Unable to create a wireless network with my airport express.  Please help!

    I am trying to setup a wireless network with an airport express, and connect to it with my Macbook. I just bought both of these and haven't been able to get wireless to work.
    I initially plugged the ethernet cable from my cable modem into the airport express and plugged it into the wall. The macbook detected it when I opened airport utility, but the express had a flashing amber light and I was unable to connect. I then unplugged the express and re-started the cable modem. This time, the airport express showed a solid green light -which should mean that it is working correctly. However, the macbook did not find the airport express device when i searched for it using airport utility. I am able to connect the macbook directly to the cable modem, after re-starting the modem, and access the internet so at least some of the systems are go.
    Any ideas? Thanks in advance for your help.
    Tom

    Is the issue that you cannot access the 802.11n AirPort Express Base Station (AXn) with the AirPort Utility that is running on your Win7 PC? ...  or that once you have configured the AXn, the PC is unable either to find the new wireless network or can find it but cannot connect to it?

  • Questions about setting up my network with my Mac Pro?

    I'm trying to set up my network with my Mac Pro. I have two other roommates that need internet and a printer that we all need to access. The modem is with my Mac Pro in room 1, the printer is with another PC in room 2, and another PC with wifi is in room 3. What is the best way to connect all these.
    My idea was to install an Airport card in my Mac Pro, then add an Airport Express station w/airtunes to room 2, to connect the PC and printer. That way, room 3 can access with wifi, and room 2 can physically plug into the Airport Express station. Problem with that is that the Airport Express Card must be professionally installed in my Mac Pro and that $80+ charge on top of the Airport Express and Aiport Card itself, turns this into a $200+ endeavor.
    I also have a wireless Linksys router and Linksys WiFi USB receiver. Anybody have any other ideas?
    Mac Pro   Mac OS X (10.4.9)  

    Your plan wouldn't work anyway. The Mac Pro can not create a WDS compatible wireless network. Therefore the AirPort Express (AX) can not use WDS to wirelessly join the network. Therefore the AX's Ethernet port will not be activated.
    The best solution is to buy an inexpensive wireless router [or the AirPort Extreme base station (AEBS)]. Connect the Mac Pro via Ethernet to the router. Add a wireless adapter to the PC in room 2. Therefore the PCs will connect wirelessly while the Mac Pro connects via Ethernet.

  • I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

  • Extend Linksys WRT160N wireless network with Airport Express

    First off, I'm a network simpleton, so please keep that in mind!
    I've seen similar posts, but I'm not sure definitively if this is possible. Trying to extend the wireless network from a linksys wrt160N with the airport. Is this possible without a phd in network engineering? If so, are there step by step instructions someplace that can help me?
    I really appreciate any direction!

    Welcome to the discussions!
    I'm assuming that you are trying to do this using wireless only.
    Apple's "extend a wireless network" feature will only work if both the main router and extending device are Apple "n" devices. Unfortunately, this feature is not compatible with devices from other manufacturers.

  • How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

    Hi,
    I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
    I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
    I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
    When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
    Can anyone help in how to get the 'double NAT issue' resolved?
    Thanks!

    So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
    As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
    If they can see the HD connected to the AirPort Extreme, will they be able to access it
    Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
    or will they still need the password needed to get onto the AirPort Extreme network?
    The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
    Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
    Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
    Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
    When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
    Once again, in very simple terms, you have two doors (access points) that open into the same room (network).  One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

  • Can I use my airport express to extend a wireless network with a non-apple router?

    I have been trying to extend my wireless network in my house.  Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6).  I want to be able to share my printer and use AirTunes.  Currently I have the AirPort plugged into the router and setup to create a new wireless network.  I would like to combine them so I don't have to switch between to print and play music.  I am not really sure where to start or if it even possible.  Any info would be great!

    If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
    If you do not need extra wireless coverage, you can turn off the wireless on the Express.
    The Express must be in Bridge Mode.
    Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
    If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
    If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • I'm unable to browse the internet at home on my Macbook Pro (10.6.3), even though it shows I am connected to the wireless network with full bars.

    This problem began weeks ago, when I suddenly couldn't browse the Internet at home despite being fully connected to the network. The network was a private, password-protected wireless network set up through a Netgear router.
    I have spent hours troubleshooting and have tried multiple fixes including resetting PRAM, deleting and re-creating Airport, deleting and re-creating networks, changing IP and DNS, etc. to no avail. My roommate's PC works perfectly fine on the same wireless network.
    This seems to be an issue with networks I use long-term. I can connect fine to networks at Starbucks, etc. for short-term use. Also, while trying to troubleshoot my connection issues on my home network over the last few weeks, I'd been using my apartment complex's public wireless connection (no password) with no issues. All of a sudden, I am having the same exact issue with that network. It's like something just snaps and maybe gets configured wrong after a few weeks or months of use.
    I am desperate to find a fix, since now I can't use the internet AT ALL while at home and need it for work.
    Thank you in advance for your help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Can't connect to wireless network with Dell Inspiron 1525 with Vista

    I set up a wireless network about a week ago, and have made it with the following security features: WEP, enable only certain MAC addresses to connect, and disabled broadcasting the SSID.  I have been able to use it just fine with my Mac computer using airport, but when I have tried to connect my roommates computer, a dell inspiron 1525 with vista, it can't connect.  I can locate the network but when I try to connect to the network, I get a message saying that for an Windows cannot connect to the network and that the Wireless association failed due to unknown reasons.  It then says to connect with your administrator, but that is me.  I have a minimal knowledge of computers just enough to be dangerous and am basically figuring this out as I go along.  If anyone has some advice for me, both my roommate and I will be very grateful.
    Thanks,
    - Jill
    Solved!
    Go to Solution.

    Sorry I am not sure if this is needed but I am using a WRT54G router ver.6.

Maybe you are looking for